Aggregation of [Cu(II)4] building blocks into [Cu(II)8] clusters or a [Cu(II)4]infinity chain through subtle chemical control

Coordination complexes of the ligand H3L [1,3-bis(3-oxo-3-phenylpropionyl)-2-hydroxy-5-methylbenzene] with Cu(II) are reported. Clusters showing various nuclearities or modes of supramolecular organization have been prepared by slightly changing the reaction conditions and have been crystallographically characterized. The reaction of H3L with one equivalent of Cu(OAc)2 in DMF yields the dinuclear complex [Cu2(HL)2(dmf)2] (1). Reaction in MeOH of H3L with an increased amount of metal, in the form of Cu(NO3)2, and excess strong base (nBu4NOH) affords the cluster [Cu8(L)2(OMe)8(NO3)2] (2). Complex 2 is a dimer of two linear [Cu4] arrays bridged by methoxide ligands, where the polynucleating ligand is fully deprotonated. The [Cu4]2 clusters are linked to each other by NO3- bridges to form one-dimensional coordination polymers. The link between [Cu8] units and their relative spatial positioning can be modified by changing the anion of the Cu(II) salt, as demonstrated by the synthesis of the cluster polymers [Cu8(L)2(OMe)8Cl2] (3) and [Cu8(L)(OMe)7.86Br2.14] (4), where only NO3- has been replaced by Cl- or Br-, respectively. Similarly, when ClO4- is used, compound [Cu8(L)2(OMe)8(ClO4)2(MeOH)4] (5) can be isolated. It contains independent [Cu8] units. A slight change in the stoichiometry of the reaction leading to 2 affords the related complex catena-[Cu4(L)(OMe)3(NO3)2(H2O)0.36] (6). This polymer contains essentially the same [Cu4] moiety as 2, albeit organized in a completely different arrangement. Each [Cu4] unit in 6 is linked by OMe- ligands to two such equivalent groups to form an infinite chain. Magnetic susceptibility measurements reveal weak antiferromagnetic exchange between Cu(II) centers in 1 (J = -0.73 cm(-1)) and strong antiferromagnetic coupling within [Cu4] chains in 2, 5, and 6 (most negative J values of -113.8 and -177.3 cm(-1) for 2 and 6, respectively).     

Metal-catalyzed anaerobic disproportionation of hydroxylamine. Role of diazene and nitroxyl intermediates in the formation of N2, N2O, NO+, and NH3

The catalytic disproportionation of NH(2)OH has been studied in anaerobic aqueous solution, pH 6-9.3, at 25.0 degrees C, with Na(3)[Fe(CN)(5)NH(3)].3H(2)O as a precursor of the catalyst, [Fe(II)(CN)(5)H(2)O](3)(-). The oxidation products are N(2), N(2)O, and NO(+) (bound in the nitroprusside ion, NP), and NH(3) is the reduction product. The yields of N(2)/N(2)O increase with pH and with the concentration of NH(2)OH. Fast regime conditions involve a chain process initiated by the NH(2) radical, generated upon coordination of NH(2)OH to [Fe(II)(CN)(5)H(2)O](3)(-). NH(3) and nitroxyl, HNO, are formed in this fast process, and HNO leads to the production of N(2), N(2)O, and NP. An intermediate absorbing at 440 nm is always observed, whose formation and decay depend on the medium conditions. It was identified by UV-vis, RR, and (15)NMR spectroscopies as the diazene-bound [Fe(II)(CN)(5)N(2)H(2)](3)(-) ion and is formed in a competitive process with the radical path, still under the fast regime. At high pH's or NH(2)OH concentrations, an inhibited regime is reached, with slow production of only N(2) and NH(3). The stable red diazene-bridged [(NC)(5)FeHN=NHFe(CN)(5)](6)(-) ion is formed at an advanced degree of NH(2)OH consumption.     

Co(II)5(OH)6(SO4)2(H2O)4: the first ferromagnet based on a layered cobalt-hydroxide pillared by inorganic...OSO3-Co(H2O)4-O3SO..

The synthetic mineral Co(II)5(OH)6(SO4)2(H2O)4 (1), obtained by hydrothermal reaction of CoSO4.7H2O and NaOH at 165 degrees C and consisting of brucite-like Co4(OH)6O2 layers pillared by OSO3-Co(H2O)4-O3SO, is a ferromagnet (T(Curie)= 12 K, Hc= 580 Oe).     

Solid-phase synthesis of arginine-containing peptides and fluorogenic substrates using a side-chain anchoring approach

Attachment of an amino acid to a solid support by its side chain is sometimes necessary to take advantage of an alpha-carboxylic group available for diverse modifications, including the incorporation of a fluorophore for the preparation of fluorogenic substrates. In contrast to most other amino acids, anchoring the guanidinium group of an arginine to a resin requires the use of a supplementary linker. To avoid the usually multistep synthesis of such a linker as well as its difficult attachment to the guanidine group, we developed a simple method where the guanidine group is built on a Rink amide resin. Our strategy followed the steps of guanidine formation: (i) addition of an isothiocyanate derivative of ornithine to the amino group of a solid support, yielding Nomega-linked thiocitrulline; (ii) S-methylation of thiourea; (iii) guanidinylation using ammonium acetate. Cleavage of the resin generated the arginine-containing compound, the amine group of the resin becoming part of the guanidine. We have demonstrated the usefulness of this method by the synthesis of a series of fluorogenic substrates for trypsin-like serine proteases, which were obtained in high yield and purity. Then, our strategy also allowed generation from the same precursor differentially substituted arginine derivatives, including Nomega-methyl- and Nomega-ethylarginines. The ability to prepare such analogues together with the intermediates thiocitrulline and S-methylisothiocitrulline from a unique precursor while the alpha-amine and carboxylic groups remain available for modification also makes this method a powerful tool for combinatorial solid-phase synthesis of NO synthase inhibitors.     

Structure–Function Relationships in Unsymmetrical Zinc Phthalocyanines for Dye‐Sensitized Solar Cells

Let it shine! The impact of the anchoring group on photovoltaic performance by a series of phthalocyanine sensitisers (see figure) has been demonstrated.

     

Epothilone Analogues with Benzimidazole and Quinoline Side Chains: Chemical Synthesis,Antiproliferative Activity,and Interactions with Tubulin

A series of epothilone B and D analogues bearing isomeric quinoline or functionalized benzimidazole side chains has been prepared by chemical synthesis in a highly convergent manner. All analogues have been found to interact with the tubulin/microtubule system and to inhibit human cancer cell proliferation in vitro, albeit with different potencies (IC₅₀ values between 1 and 150 nM ). The affinity of quinoline‐based epothilone B and D analogues for stabilized microtubules clearly depends on the position of the N‐atom in the quinoline system, while the induction of tubulin polymerization in vitro appears to be less sensitive to N‐positioning. The potent inhibition of human cancer cell growth by epothilone analogues bearing functionalized benzimidazole side chains suggests that these systems might be conjugated with tumor‐targeting moieties to form tumor‐targeted prodrugs.     

Designed Topology and Site‐Selective Metal Composition in Tetranuclear [MM′⋅⋅⋅M′M] Linear Complexes

The ligand 1,3‐bis[3‐oxo‐3‐(2‐hydroxyphenyl)propionyl]benzene (H₄L), designed to align transition metals into tetranuclear linear molecules, reacts with M^II salts (M=Ni, Co, Cu) to yield complexes with the expected [MM???MM] topology. The novel complexes [Co₄L₂(py)₆] ( 2 ; py=pyridine) and [Na(py)₂][Cu₄L₂(py)₄](ClO₄) ( 3 ) have been crystallographically characterised. The metal sites in complexes 2 and 3 , together with previously characterised [Ni₄L₂(py)₆] ( 1 ), favour different coordination geometries. These have been exploited for the deliberate synthesis of the heterometallic complex [Cu₂Ni₂L₂(py)₆] ( 4 ). Complexes 1 , 2 , 3 and 4 exhibit antiferromagnetic interactions between pairs of metals within each cluster, leading to S=0 spin ground states, except for the latter cluster, which features two quasi‐independent S=1/2 moieties within the molecule. Complex 4 gathers the structural and physical conditions, thus allowing it to be considered as prototype of a two‐qbit quantum gate.     

ScIII‐Doped Zeolites as New Heterogeneous Catalysts: Mukaiyama Aldol Reaction

Sc^III‐doped solids based on zeolite materials have been investigated for the first time as catalysts in organic synthesis. Sc^III–USY zeolite proved to be a novel and very efficient heterogeneous catalyst for the Mukaiyama aldol reaction. This easy‐to‐prepare catalyst exhibited wide scope and compatibility with functional groups and is very simple to use, easy to remove (by simple filtration), and is recyclable (up to three times without loss of activity).     

Stabilization and study of SrFe(1-x)Mn(x)O2 oxides with infinite-layer structure

A series of layered oxides of nominal composition SrFe(1-x)Mn(x)O(2) (x = 0, 0.1, 0.2, 0.3) have been prepared by the reduction of three-dimensional perovskites SrFe(1-x)Mn(x)O(3-δ) with CaH(2) under mild temperature conditions of 583 K for 2 days. The samples with x = 0, 0.1, and 0.2 exhibit an infinite-layer crystal structure where all of the apical O atoms have been selectively removed upon reduction. A selected sample (x = 0.2) has been studied by neutron powder diffraction (NPD) and X-ray absorption spectroscopy. Both techniques indicate that Fe and Mn adopt a divalent oxidation state, although Fe(2+) ions are under tensile stress whereas Mn(2+) ions undergo compressive stress in the structure. The unit-cell parameters progressively evolve from a = 3.9932(4) ? and c = 3.4790(4) ? for x = 0 to a = 4.00861(15) ? and c = 3.46769(16) ? for x = 0.2; the cell volume presents an expansion across the series from V = 55.47(1) to 55.722(4) ?(3) for x = 0 and 0.2, respectively, because of the larger effective ionic radius of Mn(2+) versus Fe(2+) in four-fold coordination. Attempts to prepare Mn-rich compositions beyond x = 0.2 were unsuccessful. For SrFe(0.8)Mn(0.2)O(2), the magnetic properties indicate a strong magnetic coupling between Fe(2+) and Mn(2+) magnetic moments, with an antiferromagnetic temperature T(N) above room temperature, between 453 and 523 K, according to temperature-dependent NPD data. The NPD data include Bragg reflections of magnetic origin, accounted for with a propagation vector k = ((1)/(2), (1)/(2), (1)/(2)). A G-type antiferromagnetic structure was modeled with magnetic moments at the Fe/Mn position. The refined ordered magnetic moment at this position is 1.71(3) μ(B)/f.u. at 295 K. This is an extraordinary example where Mn(2+) and Fe(2+) ions are stabilized in a square-planar oxygen coordination within an infinite-layer structure. The layered SrFe(1-x)Mn(x)O(2) oxides are kinetically stable at room temperature, but in air at ~170 °C, they reoxidize and form the perovskites SrFe(1-x)Mn(x)O(3-δ). A cubic phase is obtained upon reoxidation of the layered compound, whereas the starting precursor SrFeO(2.875) (Sr(8)Fe(8)O(23)) was a tetragonal superstructure of perovskite.     

ToF-SIMS imaging and depth profiling of HeLa cells treated with bromodeoxyuridine

Time of flight secondary ion mass spectrometry 2D images and molecular depth profiles of human HeLa cells treated with bromodeoxyuridine (BrdU) were acquired in the dual beam mode (Bi(3) (+) analysis beam, C(60) (+) etching beam). Several preparation protocols were investigated and were compared to a simple wash-and-dry method. The feasibility of using C(60) to clean the samples prior to imaging with Bi was also investigated quantitatively by calibrating full depth profiles of the cells using atomic force microscopy. BrdU was used as a marker for the cell nucleus, facilitating identification and localization of sub-cellular features during depth profiling. Results show that C(60) can be used to remove the surface contamination and to access different layers within the cells for 2D imaging. For a 1 nA, 10 keV C(60) (+) beam incident at 45° and rastered over a 500 × 500 μm(2) area, ~1 nm of biological material was sputtered every second. Our results show that HeLa cells were completely removed after etching with 1.3×10(15) C(60) (+) ions per cm(2), giving an average etching rate of 3.9 nm for every 10(13) C(60) per cm(2) at 10 keV and 45° incidence.