Synthesis of non-agglomerated Ba<Subscript>0.77</Subscript>Ca<Subscript>0.23</Subscript>TiO<Subscript>3</Subscript> nanopowders by a modified polymeric precursor method

In this work, we have studied the influence of the pH on the synthesis and structural properties of the Ba_0.77Ca_0.23TiO₃ nanopowders synthesized by a modified polymeric precursor method, in order to achieve non-agglomerated powders. Synthesis, morphology, thermal reactions, crystallite and average particle size of the synthesized powders were investigated through thermal analysis (DTA/TG), X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM) and Infrared spectroscopy. In summary, Ba_0.77Ca_0.23TiO₃ nanopowders were synthesized for the first time at a relative low temperature (500 °C). It was also found that the alkalinity and acidity of the solution presented a great influence on the powder properties. The best results were obtained from solutions with pH = 8.5 and 11 whose nanopowders presented weakly agglomerate, with homogeneous particle size and a narrow size distribution (30–40 nm). This behavior could be explained based on the FT-IR results in which it was possible to see the increased of the chelation in higher pHs.     

Thermal studies of pre-formulates of metronidazole obtained by spray drying technique

Compatibility studies between active drugs and excipients are substantial in the pharmaceutical technology. The objective of the present work was to develop pre-formulated mixtures of metronidazole (MT) obtained by spray drying (SPDR) and their thermoanalytical characterization. Dynamic and isothermal TG, conventional DSC and DSC coupled to a photovisual system were used. DSC experiments with both techniques confirmed the homogeneity of the conventional and pre-formulated mixtures. The TG data made possible the comparison the thermal stability of the different mixtures. Similar thermal stabilities were found of the conventional and pre-formulated mixtures, with slower particles sizes of MT.     

Modification de la position 8 des purines nucleosides et de l'adenosine monophosphate cyclique-3′,5′. Reactions de couplage catalytique des organo-magnesiens avec les bromo-8 purines ribosides et bromo-8 adenosine monophosphate cyclique-3′,5′ silyles en presence de dichloro-bis-triphenylphosphine palladium

The palladium catalysed condensation of Grignard reagents with silyl derivatives of 8-bromopurine nucleosides and 8-bromoadenosine-3′,5′ cyclic monophosphate is a convenient method for the preparation of free 8-alkylpurine nucleosides and 8-alkyladenosine-3′,5′ cyclic monophosphate.     

Fragmentation pathways of organoarsenical compounds by electrospray ion trap multiple mass spectrometry (MS6)

With its detection limit well below 30 pg microl(-1) LC-MS-MS has become a sensitive and thus popular analytical technique for organoarsenical compounds. Collision induced dissociation (CID) is a valuable tool for speciation and facilitates a positive identification of the species detected. However, it is not straightforward to understand the fragmentation pathways of organoarsenical compounds when only CID-MS-MS data is available. In the present paper we have investigated multiple mass spectrometry (MSn, n=1, 2, 3, 4, 5, 6) with electrospray CID fragmentation for a number of organoarsenical compounds likely to occur in the environment. The investigated compounds were tetramethylarsonium, trimethylarsinoxide, monomethylarsonic acid, dimethylarsinic acid, arsenobetaine, arsenocholine, and dimethylarsinoylethanol. By CID of (protonated) organoarsenical cations mostly even-electron fragments are produced after neutral loss processes such as elimination of H2, H2O, CH4, C2H2, C2H4, C2H6, HCHO, CH3OH, C2H5OH, C2H4O, and CH2CO. However, abundant odd-electron fragments are also formed after elimination of radical species. Evidence for reduction of As(V) to As(III) as a driving force in the odd-electron ion formation is obtained.     

A new method for obtaining adsorption isotherms on colloidal suspensions via electrokinetic sonic amplitude measurement

The standard methods for obtaining adsorption isotherms on colloidal suspensions are usually very time consuming and involve a large number of steps and assumptions that increase the experimental errors. In this work, an alternative method is proposed to evaluate the adsorption behavior of electrosteric-stabilized systems based on electrokinetic sonic amplitude signal measurements. The new method, entitled "zeta-sorption", is noticeably less time-consuming when compared to conventional procedures but showed great precision and reliability confirmed by comparison with data obtained from conventional routes on alumina-polyacrylate and alumina-citric acid aqueous suspensions. The experimental conditions that restrict the applicability of the new method were identified and justified by discussing the possible ion exchanges.     

Antioxidant activity of aryltetralone lignans and derivatives from Virola sebifera (Aubl.)

Aryltetralone lignans bearing methylenedioxy groups (1a-b; 2a-b) were isolated from seeds of Virola sebifera. Their antioxidant activities were evaluated by inhibition of lipid peroxidation as indicated by TBARS and chemiluminescence emission (CL) assays. The lignan 1c, 'having a 2'-hydroxy-4',5'-methylenedioxyphenyl group, was the most active compound with TBARS/CL Q 1/2 values of 0.89 and 0.10 microg/mL, respectively. The catechol derivatives 3 and 4, obtained by demethylenation of lignans 1a and 2a, were of similar activity to 1c, and all were much more effective as antioxidants than alpha-tocopherol.     

Copper corrosion in buffered and non-buffered synthetic seawater: a comparative study

The electrochemical behaviour of copper in neutral buffered and non-buffered synthetic seawater and in pure chloride solutions has been studied by cyclic voltammetry, weight loss measurements, open circuit potential and scanning electron microscopy (SEM). Values of the repassivation potentials of Cu in non-buffered and buffered synthetic seawater, at 50 mV s^–1, were 0.12 and 0.46 V vs. SCE, respectively. The sharpness, heights and location of the different peaks as well as their charges were shown to be influenced by the composition of the solution, buffering conditions, deoxygenation, polarization potential and time. High chloride concentrations lead to higher oxidation charges. The anodic and the cathodic charges were shown to increase as the chloride concentration increases. The open circuit potential transients of copper in non-deoxygenated, non-buffered synthetic seawater indicate pitting from the beginning of the exposure, while in buffered solutions the pitting appeared only after a quite long exposure period, i.e. after 40 days. Corrosion rates of Cu samples after 3 months of immersion were higher in solutions of pure chloride (0.5 M) than in synthetic seawater. After six months the differences were even more noticeable. SEM images have showed a somewhat higher density of pits on copper samples immersed in the chloride solution (0.5 M), in comparison with those in synthetic seawater.     

Simple, rapid and selective method using high-performance liquid chromatography for the determination of bretylium in plasma.

A high-performance liquid chromatographic method with ultraviolet detection has been developed for the determination of bretylium in plasma. Following a single-step solid-phase extraction procedure, bretylium is selectively isolated and well recovered from plasma. The assay sensitivity is 0.156 micrograms/ml from 250-microliters plasma samples and its linearity was assessed up to 40 micrograms/ml. The method is accurate (101.0 +/- 5.4%) and precise (maximum coefficient of variation of 8%). It provides a simple and time-saving alternative to existing methods and is particularly suitable for pharmacokinetic studies.