High temperature gas chromatography: The development of new aluminum clad flexible fused silica glass capillary columns coated with thermostable nonpolar phases: Part 1

With the simultaneous development of blank aluminum clad flexible fused silica glass capillary tubing capable of withstanding temperatures up to 500°C, coincident with a series of special high temperature methyl polysiloxane polymers, it was possible to produce for the first time, long lived fused silica capillary columns containing thin films of thermostable stationary phases which could be maintained isothermally at 400425°C and temperature programmed to 425–440°C. The “bleed rate” here for a well conditioned column was 5 picoamperes or less. Under these circumstances, alkanes with carbon numbers in the C-90 to C-100 area were rapidly and efficiently eluted from these columns. By extrapolation here, one can easily detect certain compounds with boiling points in the 750°C range. Since this type of capillary column was found to possess certain favorable properties, it was thought that it will soon replace the packed column and will probably be more popular than the borosilicate capillary column for many high temperature applications. Moreover, evidence has now accumulated which leads us to further believe that the majority of analyses of “high molecular weight” compounds performed by Supercritical Fluid Chromatography (SFC), utilizing very narrow bore fused silica capillary columns at several hundred atmospheres, can be much more simply, much more rapidly, much more economically, and much more efficiently accomplished by gas chromatography utilizing this new generation of high temperature capillary columns.     

Selective benzylic lithiation of N-Boc-2-phenylpiperidine and pyrrolidine: expedient synthesis of a 2,2-disubstituted piperidine NK1 antagonist

Unlike the lithiation of N-Boc-2-alkylpiperidines, which occurs at the 6-position, N-Boc-2-phenylpiperidine and N-Boc-2-phenylpyrrolidine can be lithiated exclusively at the 2-position. The tertiary carbanions can be trapped with a variety of electrophiles. This chemistry was used for the synthesis of a potent NK₁ ligand (K_i = 0.3 nM). The bioactive configuration at the piperidine quaternary center was determined by X-ray analysis to be (S).     

Vibrational spectrum, ab initio calculations, conformational equilibria and torsional modes of 1,3-dichloropropane

Ab initio calculations are reported for three of four possible conformers of 1,3-dichloropropane. The fourth conformer, with Cs symmetry, has a predicted enthalpy difference of more than 1500 cm(-1) from the most stable conformer from each calculation regardless of the basis set used, so there is little chance of observing it. Thus, there is no evidence in the infrared or Raman spectrum of the presence of a fourth conformer. The order of stability given by the ab initio calculations is C2(GG)>C1(AG)>C2v(AA)>Cs(GG'), where A indicates the anti form for one of the CH2Cl groups and G indicates the gauche conformation for the other CH2Cl group relative to the plane of the carbon atoms. Almost every band observed can be confidently assigned to one or another of the conformers. Many observed bands proved to be of a composite nature, with several nearly coincident vibrations of different conformers contributing to the band contour. Nonetheless, a complete assignment of fundamentals is possible for the most stable C2 conformer, and 5 of the fundamentals of the C2v conformer and 13 those of the C1 conformer can be confidently assigned.     

Fluorogel Elastomers with Tunable Transparency,Elasticity, Shape‐Memory,and Antifouling Properties

Omniphobic fluorogel elastomers were prepared by photocuring perfluorinated acrylates and a perfluoropolyether crosslinker. By tuning either the chemical composition or the temperature that control the crystallinity of the resulting polymer chains, a broad range of optical and mechanical properties of the fluorogel can be achieved. After infusing with fluorinated lubricants, the fluorogels showed excellent resistance to wetting by various liquids and anti‐biofouling behavior, while maintaining cytocompatiblity.     

Nanotextured multicrystalline Al‐BSF solar cells reaching 18% conversion efficiency using industrially viable solar cell processes

We report recent achievements in adapting industrially used solar cell processes on nanotextured surfaces. Nanostructures were etched into c‐Si surfaces by dry exothermic plasma‐less reaction of F species with Si in atmospheric pressure conditions and then modified using a short post‐etching process. Nanotextured multicrystalline wafers are used to prepare Al‐BSF solar cells using industrially feasible solar cell proc‐ essing steps. In comparison to the reference acidic textured solar cells, the nanostructured cells showed gain in short circuit current (J_sc) of up to 0.8 mA/cm² and absolute gain in conversion efficiency of up to 0.3%. The best nanotextured solar cell was independently certified to reach the conversion efficiency of 18.0%. (© 2015 WILEY‐VCH Verlag GmbH &Co. KGaA, Weinheim)     

Reversible addition–fragmentation chain transfer polymerization of alkyl‐2‐cyanoacrylates: An assessment of livingness

Alkyl 2‐cyanoacrylates (CAs) are primarily used as instant adhesives, including those sold under the Loctite brand. The adhesive action can be inhibited with acid stabilizers allowing radical polymerization to be employed. The following article details the first attempted controlled/living radical polymerization of alkyl CAs: Reversible addition fragmentation chain transfer (RAFT) polymerization mediated by a poly(methyl methacrylate) dithiobenzoate macroRAFT agent for three different CA monomers (ethyl 2‐cyanoacrylate, n‐butyl 2‐cyanoacrylate, and 2‐phenylethyl cyanoacrylate) allowed the preparation of the first block copolymers of this challenging but commercially important monomer class. Nevertheless, GPC with UV detection indicated significant loss of the RAFT end‐group for all three CAs limiting control/living character. © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 1397–1408     

Systematic generation of random networks

This paper reports the computer generation of atomic models for amorphous tetrahedrally coordinated materials. Several approaches are used and their results are intercompared in terms of careful statistical studies on each structure. The best approach is capable of automatically building large models with no included voids or dangling bonds. The strain energies are minimized for each structure implying that they represent metastable equilibrium arrangements; the radial distribution functions are in excellent agreement with experimental data. The programs developed are capable of building models which vary systematically as measured by several parameters including the ratio of five to six membered rings and the average distortion of the tetrahedra formed by near neighbors.     

Detection of heteroplasmy in individual mitochondrial particles

Mitochondrial DNA (mtDNA) mutations have been associated with disease and aging. Since each cell has thousands of mtDNA copies, clustered into nucleoids of five to ten mtDNA molecules each, determining the effects of a given mtDNA mutation and their connection with disease phenotype is not straightforward. It has been postulated that heteroplasmy (coexistence of mutated and wild-type DNA) follows simple probability rules dictated by the random distribution of mtDNA molecules at the nucleoid level. This model has been used to explain how mutation levels correlate with the onset of disease phenotype and loss of cellular function. Nonetheless, experimental evidence of heteroplasmy at the nucleoid level is scarce. Here, we report a new method to determine heteroplasmy of individual mitochondrial particles containing one or more nucleoids. The method uses capillary cytometry with laser-induced fluorescence detection to detect individual mitochondrial particles stained with PicoGreen, which makes it possible to quantify the mtDNA copy number of each particle. After detection, one or more particles are collected into polymerase chain reaction (PCR) wells and then subjected to real-time multiplexed PCR amplification. This PCR strategy is suitable to obtain the relative abundance of mutated and wild-type mtDNA. The results obtained here indicate that individual mitochondrial particles and nucleoids contained within these particles are not heteroplasmic. The results presented here suggest that current models of mtDNA segregation and distribution (i.e., heteroplasmic nucleoids) need further consideration.