Relaxation processes in semidilute solutions of polymers in liquid crystal solvents

We investigate the relaxation phenomena in a polymer (polystyrene)/liquid crystal (4-cyano-4'-n-octyl-biphenyl) system, in its homogeneous isotropic phase near the isotropic-isotropic, isotropic-nematic, and isotropic-smectic coexistence curve, using both polarized and depolarized photon correlation spectroscopy (PCS). We study this system for different polystyrene molecular weights (4750, 12 500, and 65 000 g/mol), different compositions (50, 40, 30, and 10% polystyrene (PS) by weight), and different temperatures close to phase boundaries. First of all, we determine the phase diagrams of this system for the different molecular weights. The shape of the phase diagrams strongly depends on the molecular weight. However, in all cases, at low temperatures, these systems separate into an almost pure liquid crystalline (LC) phase and polystyrene-rich phase. PCS measurements show that the relaxation processes in the homogeneous phase are not affected by the proximity of the nematic, or smectic, boundaries (even at a temperature of 0.1 degrees C above the phase separation in two phases). In polarized PCS experiments, we always see three relaxation processes well separated in time: one, very fast, with a relaxation time of the order of 10(-5) s; a second one with a relaxation time within the range 10(-2)-10(-3) s; and a last one, very slow, with a relaxation time of the order of 1 s. Both the fast and slow modes are independent of the wave vector magnitude, while the intermediate relaxation process is diffusive. In depolarized PCS experiments, the intermediate mode disappears and only the fast and slow relaxation processes remain, and they are independent of the magnitude of the wave vector. The diffusive mode is the classical diffusive mode, which is associated with the diffusion of polymer chains in all polymer solutions. The fast mode is due to the rotational diffusion of 4-cyano-4'-n-octyl-biphenyl (8CB) molecules close to polystyrene chains (transient network). Finally, we assign the slowest mode to reorientational processes of small aggregates of PS chains that are not dissolved in 8CB.     

The intermediacy of metathiophosphonate PhPSO in the reaction of N-tert-butyl-P-phenylphosphonamidothioic acid with alcohols

Kinetic studies of the reaction of N-tert-butyl-P-phenylphosphonamidothioic acid (1) with alcohols were carried out in CH2Cl2 by means of 31P NMR spectrometry. The reaction is of the first order with respect to thio acid 1. The first-order rate constant at 30 degrees C increases with increasing methanol concentration below 0.25 M, but otherwise the rate constants are either independent of alcohol concentration (MeOH above 0.25 M, BuOH) or decrease with increasing alcohol concentration (i-PrOH, t-BuOH). The effect of alcohols on the order of the reaction and parameters of activation, as well as results of competition experiments, lead us to the conclusion that reaction of 1 with alcohols occurs by an elimination-addition mechanism involving the association of the thio acid 1 and the alcohol and then formation in the rate-determining step of an encounter complex 2' ' involving metathiophosphonate 4, amine, and alcohol. Metathiophosphonate 4 reacts preferentially with the alcohol as the encounter complex (primary alcohols) or after diffusion apart as a "free" intermediate (hindered alcohols).     

Alkyl-Diol Silica (ADS): restricted access precolumn packings for direct injection and coupled-column chromatography of biofluids

The direct and repetitive injection of untreated biological fluids (e.g., hemolyzed blood, plasma, serum, cell culture and tissue homogenates) onto an HPLC-system and the subsequent analysis of low-molecular weight compounds (e.g. drugs, xenobiotics, metabolites) is rendered possible by a coupled-column configuration and special precolumn packings. For this purpose a new family of chemically and enzymatically tailored reversed-phase packing materials have been prepared. The LC-integrated sample clean-up with these restricted access (bimodal) phases is based on the complete nonadsorptive size exclusion of macromolecules (e.g. proteins) and on the simultaneous dynamic partitioning of the target molecules. The bonded phase which exclusively covers the internal pore surface of a glyceryl-modified silica is a butyryl-(C-4), capryloyl-(C-8) or stearoyl-(C-18) moiety. These ligands allow a classical reversed-phase or ion-pair chromatography during the sample work-up step. The capacity of the n-alkyl phase is comparable with conventional silica based RP-materials. The broad hydrophobic retentive capability of these packings allows the extraction of a wide variety of compounds of biomedical interest. The electroneutral and hydrophilic particle exterior (glyceryl-residues) was generated using either soluble or immobilized enzymes (lipase, esterase) which cleave the fatty acid esters exclusively at the outer surface. Unwanted macromolecular components of a sample (e.g. proteins) are quantitatively eluted in the void volume due to the restricted access given by the pore size (6 nm) and the nonadsorptive external diol coverage. The lifetime of a precolumn (25 × 4 mm I.D.) packed with these novel bimodal, i.e. RP-SEC phases exceeds more than 200 injections of 500 l plasma. In addition to the synthesis, this paper describes an application of each of these Alkyl-Diol Silica (ADS) precolumn packings in fully automated coupled-column HPLC systems for the analysis of drugs and endogenous compounds in different biological matrices.Dedicated to Professor Dr. Dr. h.c. mult. J.F.K. Huber on the occasion of his 70th birthday     

Development and application of a simple routine method for the determination of selenium in serum by octopole reaction system ICPMS

The aim of the study was to develop an inductively coupled plasma mass spectrometry (ICPMS) method for robust and simple routine determination of selenium in serum. Polyatomic interferences on ⁷⁶Se, ⁷⁷Se, and ⁷⁸Se were removed by applying an octopole reaction system ICPMS with the reaction cell pressurized with H₂ gas. We developed a novel simple optimization routine for the H₂ gas flow based on a signal-to-noise ratio (SNR) calculation of the selenium signal measured in a single selenium standard. The optimum H₂ flow was 2.9 mL min^–1. The selenium content in serum was determined after a 50-fold dilution with 0.16 M HNO₃ and quantified by using addition calibration and gallium as an internal standard. The method detection limit was 0.10 g L^–1 for ⁷⁶Se and ⁷⁸Se and 0.13 g L^–1 for ⁷⁷Se. Human serum samples from a case-control study investigating if selenium was associated with risk of colorectal adenoma were analyzed. The average selenium concentration for the control group (n=768) was 137.1 g L^–1 and the range was 73.4–305.5 g L^–1. The within-batch repeatability (a batch is ten samples) estimated from 182 replicate analyses was 6.3% coefficient of variation (CV), whereas the between-batch repeatability was 7.4% CV estimated from 361 replicates between batches. The method accuracy was evaluated by analysis of a human serum certified reference material (Seronorm Serum level II, Sero A/S, Norway). There was a fairly good agreement between the measured average of 145±3 g L^–1 (n=36) and the certified value of 136±9 g L^–1. In addition the method was successfully applied for analysis of zinc serum concentrations without further optimization. For the Seronorm certified reference material a value of 911±75 g L^–1 (n=31) for zinc was obtained, which corresponds well to the certified zinc value of 920±60 g L^–1.     

Syntheses of macrocyclic bisbibenzyls on solid support

We describe a route for the polymer supported total synthesis of the cyclic bisbibenzyls of the isoplagiochin type found in liverworts. TentaGel^® resins were used as solid support for a sequence involving Suzuki, Wittig and hydrogenation protocols. The polymer linked intermediates could be characterized by HR-MAS NMR. This route is to be extended to the synthesis of small libraries of differently halogenated derivatives.     

2,4‐Dioxa‐7‐aza‐, 2,4‐Dioxa‐8‐aza‐, and 2,4‐Dioxa‐9‐aza‐3‐phosphadecalins as Rigid Acetylcholine Mimetics: Syntheses and Characterization

Phosphorylation of suitable piperidine precursors yielded a series of novel decalin‐type O,N,P‐heterocycles. The title compounds, P(3)‐axially and P(3)‐equatorially X‐substituted, cis‐ and trans‐configurated 2,4‐dioxa‐7‐aza‐, 2,4‐dioxa‐8‐aza‐, and 2,4‐dioxa‐9‐aza‐3‐phosphabicyclo[4.4.0]decane 3‐oxides (X=Cl, F, 4‐nitrophenoxy, and 2,4‐dinitrophenoxy), are configuratively fixed and conformationally constrained P‐analogues of acetylcholine and as such represent acetylcholine (7‐aza and 9‐aza isomers) or γ‐homo‐acetylcholine mimetics (8‐aza isomers). Being irreversible inhibitors of acetylcholinesterase (AChE), the compounds are considered to be suitable probes for the investigation of the stereochemical course of the inhibition reaction by ³¹P‐NMR spectroscopy. Moreover, the design of these mimetics will enable studies of molecular interactions with AChE, in particular, the recognition conformation of acetylcholine.     

Accurate description of van der Waals complexes by density functional theory including empirical corrections

An empirical method to account for van der Waals interactions in practical calculations with the density functional theory (termed DFT-D) is tested for a wide variety of molecular complexes. As in previous schemes, the dispersive energy is described by damped interatomic potentials of the form C6R(-6). The use of pure, gradient-corrected density functionals (BLYP and PBE), together with the resolution-of-the-identity (RI) approximation for the Coulomb operator, allows very efficient computations for large systems. Opposed to previous work, extended AO basis sets of polarized TZV or QZV quality are employed, which reduces the basis set superposition error to a negligible extend. By using a global scaling factor for the atomic C6 coefficients, the functional dependence of the results could be strongly reduced. The "double counting" of correlation effects for strongly bound complexes is found to be insignificant if steep damping functions are employed. The method is applied to a total of 29 complexes of atoms and small molecules (Ne, CH4, NH3, H2O, CH3F, N2, F2, formic acid, ethene, and ethine) with each other and with benzene, to benzene, naphthalene, pyrene, and coronene dimers, the naphthalene trimer, coronene. H2O and four H-bonded and stacked DNA base pairs (AT and GC). In almost all cases, very good agreement with reliable theoretical or experimental results for binding energies and intermolecular distances is obtained. For stacked aromatic systems and the important base pairs, the DFT-D-BLYP model seems to be even superior to standard MP2 treatments that systematically overbind. The good results obtained suggest the approach as a practical tool to describe the properties of many important van der Waals systems in chemistry. Furthermore, the DFT-D data may either be used to calibrate much simpler (e.g., force-field) potentials or the optimized structures can be used as input for more accurate ab initio calculations of the interaction energies.     

The W algorithm and the D transformation for the numerical evaluation of three‐center nuclear attraction integrals

Three‐center nuclear attraction integrals over exponential‐type functions are required for ab initio molecular structure calculations and density functional theory (DFT). These integrals occur in many millions of terms, even for small molecules, and they require rapid and accurate numerical evaluation. The use of a basis set of B functions to represent atomic orbitals, combined with the Fourier transform method, led to the development of analytic expressions for these molecular integrals. Unfortunately, the numerical evaluation of the analytic expressions obtained turned out to be extremely difficult due to the presence of two‐dimensional integral representations, involving spherical Bessel integral functions. % The present work concerns the development of an extremely accurate and rapid algorithm for the numerical evaluation of these spherical Bessel integrals. This algorithm, which is based on the nonlinear D transformation and the W algorithm of Sidi, can be computed recursively, allowing the control of the degree of accuracy. Numerical analysis tests were performed to further improve the efficiency of our algorithm. The numerical results section demonstrates the efficiency of this new algorithm for the numerical evaluation of three‐center nuclear attraction integrals. © 2006 Wiley Periodicals, Inc. Int J Quantum Chem, 2007