Adding Value in Production of Multifunctional Polylactide (PLA)–ZnO Nanocomposite Films through Alternative Manufacturing Methods

Due to the added value conferred by zinc oxide (ZnO) nanofiller, e.g., UV protection, antibacterial action, gas-barrier properties, poly(lactic acid) (PLA)–ZnO nanocomposites show increased interest for utilization as films, textile fibers, and injection molding items. The study highlights the beneficial effects of premixing ZnO in PLA under given conditions and its use as masterbatch (MB), a very promising alternative manufacturing technique. This approach allows reducing the residence time at high processing temperature of the thermo-sensitive PLA matrix in contact of ZnO nanoparticles known for their aptitude to promote degradation effects onto the polyester chains. Various PLA–ZnO MBs containing high contents of silane-treated ZnO nanoparticles (up to 40 wt.% nanofiller specifically treated with triethoxycaprylylsilane) were produced by melt-compounding using twin-screw extruders. Subsequently, the selected MBs were melt blended with pristine PLA to produce nanocomposite films containing 1–3 wt.% ZnO. By comparison to the more traditional multi-step process, the MB approach allowed the production of nanocomposites (films) having improved processing and enhanced properties: PLA chains displaying higher molecular weights, improved thermal stability, fine nanofiller distribution, and thermo-mechanical characteristic features, while the UV protection was confirmed by UV-vis spectroscopy measurements. The MB alternative is viewed as a promising flexible technique able to open new perspectives to produce more competitive multifunctional PLA–ZnO nanocomposites.     

Dielectric Spectroscopy Analysis of Liquid Crystals Recovered from End-of-Life Liquid Crystal Displays

In the present work, the dielectric properties of recycled liquid crystals (LCs) (non-purified, purified, and doped with diamond nanoparticles at 0.05, 0.1, and 0.2 wt%) were investigated. The studied LC mixtures were obtained from industrial recycling of end-of-life LC displays presenting mainly nematic phases. Dielectric measurements were carried out at room temperature on a frequency range from 0.1 to 10⁶ Hz using an impedance analyzer. The amplitude of the oscillating voltage was fixed at 1 V using cells with homogeneous and homeotropic alignments. Results show that the dielectric anisotropy of all purified samples presents positive values and decreases after the addition of diamond nanoparticles to the LC mixtures. DC conductivity values were obtained by applying the universal law of dielectric response proposed by Jonscher. In addition, conductivity of the doped LC mixtures is lower than that of the undoped and non-purified LC.     

Miscibility in poly(L-lactide)- b -poly( $ \upvarepsilon$ -caprolactone) double crystalline diblock copolymers

Thermally stimulated depolarization currents, TSDC, wide-angle X-ray scattering, WAXS, differential scanning calorimetry, DSC, and polarized light optical microscopy, PLOM, have been used to examine poly(L-lactide)-b -poly( -caprolactone) diblock copolymers in a wide composition range. Both components are crystallizable and the miscibility in the amorphous phase has been determined from the behavior of the primary relaxations which are the dielectric manifestation of the glass transition, and also from the superstructural morphology revealed by PLOM and the compositional dependence of the melting points as determined by DSC. Distinct segmental mobilities in the amorphous phase which can be well resolved by TSDC are present; the mode of the slower component shifts to lower temperatures as the PCL content increases while the glass transition of neat PCL is present for all compositions. A relaxation times bimodal distribution is apparent for PCL-rich copolymers. The composition dependence of the multiple glass transitions detected in these weakly segregated copolymers are predicted by the self-concentration model for a miscible blend made of components with a large T_g contrast.     

Experimental demonstration of a narrowband, angular tolerant, polarization independent, doubly periodic resonant grating filter

Resonant grating filters are promising components for free-space narrowband filtering. Unfortunately, due to their weak angular tolerance, their performances are strongly deteriorated when they are illuminated with a standard collimated beam. Yet this problem can be overcome by resorting to a complex periodic pattern known as the doubly periodic grating [Lemarchand et al., Opt. Lett.23, 1149 (1998)]. We report what we believe to be the first experimental fabrication and characterization of a bidimensional doubly periodic grating filter. We obtained a 0.5 nm bandpass polarization independent reflection filter for telecom wavelengths (1520-1570 nm) that presents a transmittivity minimum of 18% with a standard incident collimated beam.     

Active mode locking of continuous-wave doubly and singly resonant optical parametric oscillators

We report on what we believe to be the first active mode locking of near-degenerate, doubly and singly resonant cw-pumped optical parametric oscillators (OPOs). We show experimentally that a steady-state regime of short pulses is reached in a few tens of microseconds under cw pumping. The oscillation buildup dynamics of both OPOs is also explored, evidencing an unusual transient behavior in the mode-locking process.     

Tailoring the Structure of Two‐Dimensional Self‐Assembled Nanoarchitectures Based on NiII–Salen Building Blocks

The synthesis of a series of Ni^II–salen‐based complexes with the general formula of [Ni(H₂L)] (H₄L=R²‐N,N′‐bis[R¹‐5‐(4′‐benzoic acid)salicylidene]; H₄L1: R²=2,3‐diamino‐2,3‐dimethylbutane and R¹=H; H₄L2: R²=1,2‐diaminoethane and R¹=tert‐butyl and H₄L3: R²=1,2‐diaminobenzene and R¹=tert‐butyl) is presented. Their electronic structure and self‐assembly was studied. The organic ligands of the salen complexes are functionalized with peripheral carboxylic groups for driving molecular self‐assembly through hydrogen bonding. In addition, other substituents, that is, tert‐butyl and diamine bridges (2,3‐diamino‐2,3‐dimethylbutane, 1,2‐diaminobenzene or 1,2‐diaminoethane), were used to tune the two‐dimensional (2D) packing of these building blocks. Density functional theory (DFT) calculations reveal that the spatial distribution of the LUMOs is affected by these substituents, in contrast with the HOMOs, which remain unchanged. Scanning tunneling microscopy (STM) shows that the three complexes self‐assemble into three different 2D nanoarchitectures at the solid–liquid interface on graphite. Two structures are porous and one is close‐packed. These structures are stabilized by hydrogen bonds in one dimension, while the 2D interaction is governed by van der Waals forces and is tuned by the nature of the substituents, as confirmed by theoretical calculations. As expected, the total dipolar moment is minimized     

Substituent effect in anionic polymerization of β-lactones initiated by alkali metal alkoxides

The influence of methyl substituent on the mechanism of the ring-opening polymerization of β-lactones initiated by alkali metal alkoxides is discussed. Attention has been paid to the effect of the substituent position in the monomer molecule on the ring-opening mechanism, the 3,3-dimethyl-2-oxetanone (pivalolactone), 4-methyl-2-oxetanone (β-butyrolactone) and 2-oxetanone (β-propiolactone) being chosen as model monomers. Moreover, it was found unexpectedly that in the case of pivalolactone polymerization, besides open-chain polymers, cyclic oligomers are produced.     

Development toward a double focusing isotopic separator for noble gas isotope enrichment

A double focusing sector field mass filter used in Nier–Johnson geometry has been built in order to perform Kr isotope enrichment for ⁸¹Kr and ⁸⁵Kr isotopes. The principle consists in implanting Kr⁺ ions accelerated at 7 keV in Al foils after separation using the magnetic sector. A specific ion source has been designed capable of generating high Kr⁺ ion beams (>0.5 μA) to transfer into the collecting Al foils in 3 to 5 h significant fractions of large Kr samples (10¹⁵ to 10¹⁶ atoms) initially introduced in the instrument. Implanted Kr isotopes can be further selectively released from the Al foil by surface ablation using an infrared laser beam. Implantation yields and enrichment factors are measured using a conventional mass spectrometer. Copyright © 2016 John Wiley & Sons, Ltd.     

Reducing methane formation in methanol to olefins reaction on metal impregnated SAPO-34 molecular sieve

SAPO-34 silicoaluminophosphate molecular sieve produces large amounts of methane at elevated temperatures in the methanol to olefins (MTO) process. This significantly reduces the lower olefins selectivity a key factor in determining the commercial viability of this catalyst. Impregnation of the SAPO-34 molecular sieve with metal ions such as K, Cs, Pt, Ag and Ce was found to reduce the amount of methane significantly at higher temperatures thereby increasing the lower olefins selectivity. This observed effect is less apparent at lower temperatures where the amount of methane formed is generally low. This revised version was published online in June 2006 with corrections to the Cover Date.