Coherence characteristics of light-emitting diodes

We report the measurement of coherence characteristics of light-emitting diodes (LEDs). Experiments were performed using red and green color LEDs directly illuminating the Young's double slit kept in the far-zone. Fourier transform fringe analysis technique was used for the measurement of the visibility of interference fringes from which the modulus of degree of spectral coherence was determined. Low degree of spectral coherence, typically 0.4 for red and 0.2 for green LED with double-slit separation of 400 μm was observed. A variable slit was then kept in front of the LEDs and the double slit was illuminated with the light coming out of the slit. Experiments were performed with various slit sizes and the visibility of the interference fringes was observed. It was found that visibility of the interference fringes changes drastically in presence of variable slit kept in front of LEDs and a high degree of spectral coherence, typically 0.85 for red and 0.8 for green LED with double-slit separation of 400 μm and rectangular slit opening of 500 μm was observed. The experimental results are compared with the theoretical counterparts. Coherence lengths of both the LEDs were also determined and it was obtained 5.8±2 and 24±4 μm for green and red LEDs, respectively.     

First order transition to oscillation death through an environment

The emergence of dynamical abrupt transitions for the first time in an ensemble of identical limit-cycle and chaotic oscillators coupled via a common environment is reported. The transition from the oscillatory state to the death state and vice versa, in these networks of oscillators are found not only discontinuous as well as irreversible in the parameter space. This first order phase transition in these systems is termed as Explosive Death. The occurrence of such transition is studied in details by using an appropriate order parameter for both limit-cycle and chaotic oscillators, in particular, Stuart–Landau and Rössler oscillators. The backward transition point for this phenomenon is obtained analytically using linear stability analysis and is found to be consistent with the numerical results.     

Liquid-Phase and Solventless Oxidation of Cyclohexane,Benzene, and Other Hydrocarbons by Cerium(IV) Catalyzed by Iridium(III) in Acidic Medium

Oxidation of some hydrocarbons dissolved in acetic acid by cerium(IV) sulphate at 100 °C in the presence of traces of iridium(III) chloride (catalyst-substrate 1:56818 to 151515) in the solution phase resulted in good to excellent yields of corresponding carbonyl compounds. In the cases of cyclohexane and benzene, 44% and 51.8% yields of corresponding carbonyl compounds were obtained, whereas in other cases, yield ranged from 34.9 to 99.8%. Yield decreased when reactions were performed in a microwave oven by adsorbing reactants (except acetic acid) on alumina. Decrease in the yield was probably due to the high temperature generated during the course of the reaction, resulting in the loss of organics from evaporation. Conditions were optimized for the highest yields under ambient conditions.     

Synthesis of Some Novel bis‐Spiro[indole‐pyrazolinyl‐thiazolidine]‐2,4′‐diones

The reaction of 1H‐indol‐2,3‐diones with 1,6‐dibromohexane has resulted in the formation of new 1H‐indol‐2,3‐diones‐1,1′‐(1,6‐hexanediyl)bis in quantitative yields. These compounds have been used for the synthesis of novel [3′‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl)spiro[3H‐indol‐3,2′‐thiazolidine]‐2,4′‐dione]‐1,1′‐(1,6‐hexanediyl)bis via bis Schiff's bases, [3‐(2,3‐dimethyl‐5‐oxo‐1‐phenyl‐3‐pyrazolin‐4‐yl) imino‐1H‐indol‐2‐one]‐1,1′‐(1,6‐hexanediyl)bis.     

Validated ultra-performance liquid chromatography tandem mass spectrometry method for the determination of pramipexole in human plasma

A sensitive and high throughput ultra-performance liquid chromatography tandem mass spectrometry (UPLC-MS-MS) method has been developed for the determination of pramipexole, a dopamine agonist, in human plasma. Sample preparation involved liquid-liquid extraction of pramipexole and ranitidine as the internal standard (IS) in ethyl acetate from 100 μL human plasma. The chromatographic separation is achieved on a Waters Acquity UPLC BEH C18 (100 mm × 2.1 mm, 1.7 μm) analytical column using an isocratic mobile phase, consisting of 10 mM ammonium formate (pH 7.50)-acetonitrile (15:85, v/v), at a flow-rate of 0.5 mL/min. The precursor → product ion transition for pramipexole (m/z 212.1 → 153.0) and IS (m/z 315.0 → 176.1) were monitored on a triple quadrupole mass spectrometer, operating in the multiple reaction monitoring (MRM) and positive ion mode. The method was validated over a wide dynamic concentration range of 20-4020 pg/mL. Matrix effect is assessed by post-column infusion experiment and the process efficiency were 91.9% and 85.7% for pramipexole and IS, respectively. The method is rugged and rapid with a total run time of 1.5 min and is applied to a bioequivalence study of 0.25 mg PPX tablet formulation in 30 healthy Indian male subjects under fasting condition.     

Properties of Ionic Liquid Confined in Porous Silica Matrix

Porous silica matrices of different pore sizes with confined ionic liquid (1‐butyl‐3‐methylimidazolium hexafluorophosphate) [BMIM] [PF₆] were prepared by sol‐gel technique using a tetraethyl orthosilicate (TEOS) precursor with an aim to study the changes in physico‐chemical properties of ionic liquid on confinement. It is found that on confinement 1) melting point decreases, 2) fluorescence spectra shows a red shift and 3) the vibrational bands are affected particularly those of imadazolium ring, which interacts more with the walls of the silica matrix. Preliminary theoretical calculations suggest that SiO₂ matrix interact more with the heterocyclic group of [BMIM] cation than the tail alkyl chain end group resulting in significant changes in the aromatic vibrations.     

On-line high-performance liquid chromatography–ultraviolet–nuclear magnetic resonance method of the markers of nerve agents for verification of the Chemical Weapons Convention

This paper details an on-flow liquid chromatography–ultraviolet–nuclear magnetic resonance (LC–UV–NMR) method for the retrospective detection and identification of alkyl alkylphosphonic acids (AAPAs) and alkylphosphonic acids (APAs), the markers of the toxic nerve agents for verification of the Chemical Weapons Convention (CWC). Initially, the LC–UV–NMR parameters were optimized for benzyl derivatives of the APAs and AAPAs. The optimized parameters include stationary phase C₁₈, mobile phase methanol:water 78:22 (v/v), UV detection at 268 nm and ¹H NMR acquisition conditions. The protocol described herein allowed the detection of analytes through acquisition of high quality NMR spectra from the aqueous solution of the APAs and AAPAs with high concentrations of interfering background chemicals which have been removed by preceding sample preparation. The reported standard deviation for the quantification is related to the UV detector which showed relative standard deviations (RSDs) for quantification within ±1.1%, while lower limit of detection upto 16 μg (in μg absolute) for the NMR detector. Finally the developed LC–UV–NMR method was applied to identify the APAs and AAPAs in real water samples, consequent to solid phase extraction and derivatization. The method is fast (total experiment time ∼2 h), sensitive, rugged and efficient.     

Innovative beneficial reuse of reverse osmosis concentrate using bipolar membrane electrodialysis and electrochlorination processes

Reverse osmosis (RO) is a widely used and rapidly growing desalination technology. A major disadvantage of this process is that the concentrate from the RO process, which could be as much as 25% of the feed stream, represents a polluting stream. This waste stream could pose a significant challenge to the implementation of this process, particularly for inland communities which do not have the option of ocean disposal. An excellent environmentally benign approach to disposal could be beneficial reuse of the waste stream. This study presents two innovative beneficial reuse strategies for RO concentrate produced by an integrated membrane system (IMS) from a wastewater reclamation facility. The technologies evaluated in this study included bipolar membrane electrodialysis (BMED) for conversion of RO concentrate into mixed acid and mixed base streams, and electrochlorination (EC) for onsite chlorine generation. Bench-scale studies conducted with BMED demonstrated that RO concentrate could be desalted while producing mixed acids and mixed bases with concentrations as high as 0.2N. Similarly, the EC process was capable of producing a 0.6% hypochlorite solution from RO concentrate. The acids and bases as well as the hypochlorite produced could be directly applied to the RO process as well as upstream pre-treatment processes. A preliminary economic evaluation of the viability of these two approaches was conducted by conducting rough order of magnitude cost estimates based on the bench-scale performance of these processes on RO concentrate. A comparison of the overall costs of an Integrated Membrane System utilizing these innovative reuse strategies with conventional disposal options and thermal zero liquid discharge treatment is presented. This comparison indicates that a reuse approach might be economically viable for inland wastewater reuse facilities that utilize RO membranes and have limited options for concentrate disposal.     

Differential pulse polarographic determination of trace amounts of vanadium and molybdenum in various standard alloys and environmental samples after preconcentration of their morpholine-4-carbodithioates on microcrystalline naphthalene or morpholine-4-dithiocarbamate cetyltrimethyl-ammonium bromide-naphthalene adsorbent

A highly selective, sensitive, and fairly rapid and economical differential pulse polarographic (DPP) method has been reported for the determination of trace amounts of vanadium and molybdenum in standard alloys and various environmental samples. The morpholine-4-carbodithioates of these metals were retained (>99% recovery) quantitatively on microcrystalline naphthalene in the pH range 4.5-6.9 for vanadium and 1.5-4.5 for molybdenum. These metals were determined by DPP after desorption with 10 ml of 1 M HCl. Vanadium and molybdenum may also be preconcentrated by passing their aqueous solutions under similar conditions on morpholine-4-dithiocarbamate CTMAB-naphthalene adsorbent packed in a column at a flow rate of 1-5 ml min(-1) and determined similarly. The detection limits are 0.20 ppm for vanadium and 0.04 ppm for molybdenum at minimum instrumental settings (signal to noise ratio=2). The linearity is maintained in the following concentration ranges, vanadium 0.50-10.0 and molybdenum 0.10-9.0 ppm, with a correlation factor of 0.9996 (confidence interval of 95%, slopes 0.0196 and 0.01497 muA mug(-1), intercepts 3.65x10(-3) and -1.92x10(-3) respectively) and relative standard deviation of 1.1% in the microcrystalline method, while in the column method, the linearity is maintained in the concentration ranges, 0.50-6.5 for vanadium and 0.10-5.5 ppm for molybdenum with correlation factor of 0.9994 (with confidence interval of 95%, slopes 0.0194, 0.015 muA mug(-1), intercepts 3.60x10(-3) and -1.90x10(-3) respectively) and relative standard deviation of 1.4%. Various parameters such as the effect of pH, reagent, naphthalene and CTMAB concentrations, volume of aqueous phase and interference of a large number of metal ions on the estimation of vanadium and molybdenum have been studied in detail to optimize the conditions for their voltammetric determination at trace level in various standard alloys and environmental samples.