Using capillary electrophoresis for the determination of organic acids in Port wine

The simultaneous separation and determination of organic acids in several samples of white and red Port wines was performed by capillary zone electrophoresis using indirect UV detection with 2,6-pyridinedicarboxylic acid as a background electrolyte buffer. Operational parameters like migration time, temperature, voltage and capillary length were optimized. Sixteen samples of red wine and four samples of white wine were used to analyze for tartaric, malic, lactic, succinic and acetic acids using glyoxylic acid as the internal standard. The method is rapid, sensitive and quantitative, and time-consuming sample preparation, such as solid-phase extraction or liquid-liquid extraction procedure, is not required.     

An insight into the mechanisms of the phototoxic response induced by cyamemazine in cultured fibroblasts and keratinocytes

The phototoxicity of cyamemazine (CMZ, Tercian), a neuroleptic of the phenothiazine family, has recently been reported in humans. CMZ has an absorbance maximum at 267 nm (molar absorptivity, 25,800 M(-1) cm(-1)) but a weaker molar absorptivity in the ultraviolet A (UV-A) region. CMZ exhibits a fluorescence with maximum emission at 535 nm and a quantum yield of 0.11. CMZ is a powerful photosensitizing agent toward HS 68 human skin fibroblasts and NCTC 2544 keratinocytes. At a UV-A radiation dose of 10 J/cm2, innocuous to cells in the absence of CMZ, the LD50 (lethal dose corresponding to 50% killing) are 0.5 and 1 microM for the fibroblasts and the keratinocytes, respectively, after overnight incubation with the drug. Short incubation times do not significantly alter the LD50. The CMZ-induced phototoxicity is accompanied by lipid membrane peroxidation consistent with the amphiphilic character of this photosensitizer. Keratinocytes are an order of magnitude less sensitive to the photosensitized lipid peroxidation than fibroblasts. Microspectrofluorometry reveals that lysosomal membranes are major sites of CMZ incorporation into the two cell lines because a Forster-type resonance energy transfer process occurs from CMZ to LysoTracker Red DND99 (LTR), a specific fluorescent probe of lysosomal membranes. The CMZ-photosensitized destruction of LTR demonstrates that CMZ retains its photosensitizing capacity after its lysosomal uptake.     

Fibers and 3D mesh scaffolds from biodegradable starch-based blends: production and characterization

The aim of this work is the production of fibers from biodegradable polymers to obtain 3D scaffolds for tissue engineering of hard tissues. The scaffolds required for this highly demanding application need to have, as well as the biological and mechanical characteristics, a high degree of porosity with suitable dimensions for cell seeding and proliferation. Furthermore, the open cell porosity should have adequate interconnectivity for a continuous flow of nutrients and outflow of cell metabolic residues as well as to allow cell growth into confluent layers. Blends of corn starch, a natural biodegradable polymer, with other synthetic polymers (poly(ethylene vinyl alcohol), poly(epsilon-caprolactone), poly(lactic acid)) were selected for this work because of their good balance of properties, namely biocompatibility, processability and mechanical properties. Melt spinning was used to produce fibers from all the blends and 3D meshes from one of the starch-poly(lactic acid) blends. The experimental characterization included the evaluation of the tensile mechanical properties and thermal properties of the fibers and the compression stiffness, porosity and degradation behavior of the 3D meshes. Light microscopy picture of 3D meshes.     

Azaphenanthrene alkaloids with antitumoral activity from Anaxagorea dolichocarpa Sprague & Sandwith (Annonaceae)

Phytochemical investigation of Anaxagorea dolichocarpa Sprague & Sandwith led to isolation of three azaphenanthrene alkaloids: eupolauramine, sampangine and imbiline 1. Their chemical structures were established on the basis of spectroscopic data from IR, HR-ESI-MS, NMR (including 2D experiments) and comparison with the literature. Sampangine and imbiline 1 are being described in the Anaxagorea genus for the first time. Eupolauramine and sampangine show concentration-dependent antitumoral activity in leukemic cells K562 with IC(50) of 18.97 and 10.95 μg/mL, respectively.     

Yeast cell wall particles: a promising class of nature-inspired microcarriers for multimodal imaging

This communication demonstrates that yeast cell wall particles (YCWPs) are a promising class of nature-inspired biocompatible microcarriers for the delivery of amphipathic/lipophilic imaging reporters. When a paramagnetic MRI agent is loaded, the longitudinal relaxivity per particle at 0.5 T is the highest ever reported for Gd-based systems.     

Quantitation of glucosamine sulfate in plasma by HPLC-MS/MS after administration of powder for oral solution formulation

A rapid method for the quantification of glucosamine in human plasma using high‐performance liquid chromatography coupled to tandem mass spectrometry was developed and validated. The sample preparation includes a simple deproteinization step, using d ‐[1‐¹³C] glucosamine hydrochloride as an internal standard. Chromatographic separation was performed on an ACE Ciano column using isocratic elution with acetonitrile and aqueous 2 mm ammonium acetate containing 0.025% formic acid (80:20). Selected reaction monitoring was performed using the transitions m/z 180.1 → m/z 72.1 and m/z 181.0 → m/z 74.6 to quantify glucosamine and internal standard, respectively. The method was validated and proved to be linear, accurate and precise over the range 50–5000 ng/mL of glucosamine. Recovery rates higher than 90% were obtained for both glucosamine and internal standard. No matrix effect was detected in the samples. The validated method was successfully applied to a pharmacokinetic study after oral administration of a powder for oral solution formulation containing glucosamine sulfate. Copyright © 2011 John Wiley & Sons, Ltd.     

Uncertainty estimation to evaluate mass balances on a combustion system

Mass balances of ash and potassium for a fluidized bed combustor were performed incorporating measurement uncertainties. The total output mass of ash or a chemical element should be equal to the mass in the input fuel; however, this is not often achieved. A realistic estimation of recovery uncertainty can support the reliability of a mass balance. Estimation of uncertainty helps to establish a reliable evaluation of the recovery ratio of ash mass and elemental mass. This may clarify whether any apparent lack in closing the mass balance can be attributed to uncertainties. The evaluation of measurement uncertainty for different matrices, namely coal, biomass, sand and ashes from different streams was based on internal quality control data and external quality control data, namely analysis of samples from proficiency tests or use of a certified reference material. The evaluation of intermediate precision and trueness allowed the estimation of measurement uncertainty. Due to the different physic and chemical characteristics of the studied matrices, the uncertainty of precision was evaluated using R-charts of data obtained from the analysis of duplicates for the majority of samples. This allowed evaluating sample heterogeneity effects. The instrumental acceptance criterion was also considered and included in the combined uncertainty. The trueness was evaluated using data from several proficiency tests and from analysis of a certified reference material or sample spiking. Statistically significant bias was included.     

Experimental investigation and thermodynamic modeling of the Au–Ge–Ni system

Abstract  

Phase equilibria in the Au–Ge–Ni ternary system were studied by means of scanning electron microscopy, electron probe microanalysis, X-ray diffraction, and differential scanning calorimetry. The phase relations in the solid state at 600 °C as well as a vertical section at Au₇₂Ge₂₈–Ni were established. No ternary compound was found at 600 °C. On the basis of the experimental phase equilibria data, a thermodynamic model of the Au–Ge–Ni ternary system was developed using the CALPHAD method. Thermodynamically calculated phase diagrams are shown at 600 °C, in two vertical sections and the liquidus projection. Reasonable agreement between the calculations and the experimental results was achieved.     

Four-component assembly of chiral N-B heterocycles with a natural product-like framework

The dative N-B bond was used to simply assemble heterocycles with a skeleton akin to the 5-oxofuro[2,3-b]furan motif. Twenty-five new N-B heterocycles were prepared via a highly efficient one-pot four-component reaction in yields and diastereoselectivities up to 95% and >97%, respectively. Several reaction intermediates were discovered using electrospray ionization mass spectroscopy which set the basis for the mechanism elucidation using DFT calculations.     

Characterization of natural cellulosic fibers from Yucca aloifolia L. leaf as potential reinforcement of polymer composites

Cellulose - In this work lignocellulosic fibers were obtained from Yucca aloifolia L. leaves and their chemical, morphological, thermal and mechanical properties were studied. The fibers were...