碳化硅中点缺陷对热传导性能影响的分子动力学研究

碳化硅(SiC)由于性能优异,已广泛应用于核技术领域.在辐照环境下,载能入射粒子可使材料中的原子偏离晶体格点位置,进而产生过饱和的空位、间隙原子、错位原子等点缺陷,这些缺陷将改变材料的热物性能,劣化材料的服役性能.因此,本文利用平衡分子动力学方法(Green-Kubo方法)采用Tersoff型势函数研究了点缺陷对立方碳化硅(β-SiC或3C-SiC)热传导性能的影响规律.研究过程中考虑的点缺陷包括:Si间隙原子(Si_Ⅰ)、Si空位(Si_Ⅴ)、Si错位原子(Si_C)、C间隙原子(C_Ⅰ)、C空位(C_Ⅴ)和C错位原子(C_Si).研究结果表明,热导率(λ)随点缺陷浓度(c)的增加而减小.在研究的点缺陷浓度范围(点缺陷与格点的比例范围为0.2%—1.6%),额外热阻率(Δ_R-R_defect-R_perfect,R=1/λ,R_defect为含缺陷材料的热阻率,R_perfec...     

硼烯/石墨烯异质结缺陷态电子结构的第一性原理研究

采用密度泛函理论系统研究了硼烯-石墨烯异质结中缺陷态对体系电子结构特性的影响.发现缺陷态存在于石墨烯一侧时会破坏异质结结构;但缺陷态存在于硼烯一侧时异质结结构仍然会稳定存在,并且体系电子结构随缺陷态密度改变而发生明显变化:从无缺陷态时的金属特性变为多缺陷态时的半导体特性.常温下的分子动力学模拟进一步验证了相关体系的动力学稳定性.     

Determination of the surface states from the ultrafast electronic states in a thermoelectric material

We reveal the electronic structure in Yb Cd₂Sb₂,a thermoelectric material,by angle-resolved photoemission spectroscopy(ARPES)and time-resolved ARPES(tr ARPES).Specifically,three bulk bands at the vicinity of the Fermi level are evidenced near the Brillouin zone center,consistent with the density functional theory(DFT)calculation.It is interesting that the spin-unpolarized bulk bands respond unexpectedly to right-and left-handed circularly polarized probe.In addition,a hole band of surface states,which is not sensitive to the polarization of the probe beam and is not expected from the DFT calculation,is identified.We find that the non-equilibrium quasiparticle recovery rate is much smaller in the surface states than that of the bulk states.Our results demonstrate that the surface states can be distinguished from the bulk ones from a view of time scale in the nonequilibrium physics.     

Cr（V）与H2络合物的EPR信号

Cr交换丝光沸石在氢气氛中强烈还原并冷却后,出现了一个各向同性的EPR信号,g值2.003,△H_PP 13.4 gauss.采用EHMO方法计算了各种可能模型化合物的g值,结果建议这一信号对应Cr(V)与H₂分子形成的络合物。     

非线性演化方程孤立波的同伦分析法求解

利用同伦分析法求解了Burgers方程，得到了其扭结形孤立波的近似解析解，该解非常接近于相应的精确解.结果表明，同伦分析法可用来求解非线性演化方程的孤立波解.同时，也对所用方法进行了一定扩展，得到了Kadomtsev-Petviashvili(KP)方程的钟形孤立子解.经过扩展后的方法能够更方便地用于求解更多非线性演化方程的高精度近似解析解. 关键词： Burgers方程 同伦分析法 KP方程 孤立波解     

The melting curve of CaSiO3 perovskite under lower mantle pressures

The high pressure melting curve of CaSiO₃ perovskite is simulated by using the constant temperature and pressure molecular dynamics method combined with effective pair potentials for the first time. The simulated results for the partial radial distribution function all compare well with experiment. The calculated equation of state is very successful in accurately reproducing the recent experimental data over a wide pressure range. The predicted high pressure melting curve is in good agreement with the experimental ones, and the melting curve up to the core–mantle boundary pressure, being very steep at lower pressures, rapidly flattens on increasing pressure. The present results also suggest the validity of the experimental data of Zerr and Boehler.     

Q-switched operation of an in-band-pumped Ho:LuAG laser with kilohertz pulse repetition frequency

We report continuous-wave (CW) and repetitively Q-switched operation of an in-band-pumped Ho:LuAG laser at room temperature. End-pumped by a Tm:YLF solid-state laser with emission wavelength of 1.91 μm, the CW Ho:LuAG laser generated 5.4-W output at 2100.7 nm with beam quality factor of M ²～1.03 for an incident pump power of 14.1 W, corresponding to slope efficiency of 67% with respect to absorbed pump power. Up to 1.5-mJ energy per pulse at pulse repetition frequency (PRF) of 3 kHz and 4.5-W average power with FWHM pulse width of 28 ns at 5 kHz were demonstrated in repetitively Q-switched operation.     

Paul阱中两个超冷离子的量子统计特性

讨论两个囚禁在Ｐａｕｌ阱的对称轴上的超冷离子的量子统计特性，可以发现，它们的稳定囚禁不仅与阱的稳定区有关，而且与它们自身的自旋和电荷数大小有关。     

金属基陶瓷复合材料的激光热冲击破坏效应

 研究了激光热冲击条件下静态受拉Sic颗粒增强6061铝合金材料的热断裂行为。热冲击用的激光束的脉宽分别为1.0ms和250μs, 激光束辐照在缺口的根部附近。对于热冲击下裂纹的产生及扩展进行细致的宏、微观观察,发现裂纹的产生和扩展的机制是不相同的。