A study of the chemiluminescence behavior of myoglobin with luminol and its analytical applications

A chemiluminescence signal at 425 nm was observed when ferric state myoglobin was mixed with luminol in alkaline medium. Because the signal was remarkably enhanced in the presence of Fe(CN)₆ ^4–, analytical applications were investigated in a flow-injection system. The increase in chemiluminescence was linearly dependent on myoglobin concentration in the range 0.1 to 100 nmol L^–1, and the limit of detection was 0.04 nmol L^–1 with relative standard deviation 3.2% (3). It was also found that binding of Mb with the ligands CN^–, SCN^–, and F^– significantly inhibited the chemiluminescence reaction. The linear dynamic ranges for the ligands were 1.0–300.0, 0.1–3.0, and 0.5–100.0 nmol L^–1, and the limits of detection (S/N=3) 0.4, 0.04, and 0.2 nmol L^–1, for F^–, CN^–, and SCN^–, respectively. The relative standard deviations were 5.32%, 6.13%, and 3.38% for 0.1 nmol L^–1 CN^–, 0.5 nmol L^–1 SCN^–, and 1.0 nmol L^–1 F^–, respectively. At a flow rate of 2.0 mL min^–1 the assay could be accomplished in 1 min, including sampling and washing. The method has been successfully applied to the determination of myoglobin in human urine and F^– in water samples. A possible mechanism of chemiluminescence production by myoglobin and luminol is presented.     

One-pot Three-component Condensation Reactions in Water. An Efficient and Improved Procedure for the Synthesis of Furan Annulated Heterocycles

Summary. The environment-friendly one-pot three-component condensation reactions of 4-hydroxycoumarin or 4-hydroxy-6-methylpyrone, p-substituted benzaldehyde, and alkyl or aryl isocyanides to afford furocoumarines or furopyranones in water in good yields after about one hour at 75°C are reported.     

The first example of Diels-Alder cycloaddition of ortho-xylylenes to meso-tetraarylporphyrins containing electron-deficient β,β-double bonds

β-Nitro-5,10,15,20-tetraphenylporphyrin and its zinc complex, or 2,7-dinitro-5,10,15,20-tetraphenylporphyrin, react with 1,3-dihydrobenzo[c]thiophene 2,2-dioxide in refluxing 1,2,4-trichlorobenzene, giving rise to chlorins, bacteriochlorins or isobacteriochlorins. The products obtained are attractive intermediates for further functionalization of porphyrins and may be of potential use as sensitizers in photodynamic therapy.     

Hydrothermal Synthesis,Conversion Reaction,and Crystal Structure of 2-D 2-bromo-1,4-benzenedicarboxylate Copper(II) Complex with 2,2′-bipyridine

A fully deprotonated 2-bromo-1,4-benzenedicarboxylate copper(II) complex, [Cu(bbdc)(2,2′-bipy)](H₂O) (bbdc= 2-bromo-1,4-benzenedicarboxylate dianion, 2,2′-bipy=2,2′-bipyridine), was synthesized under hydrothermal conditions. This compound also can be prepared from the partly deprotonated [Cu(Hbbdc)₂(2,2′-bipy)] under basic and hydrothermal conditions. The crystal structure consists of infinite chains of [Cu₂(μ₄-bbdc)]²⁺ building blocks connected by bis-monodentate bbdc ligands and exhibits an extended 2-D architecture. Electronic supplementary material Electronic supplementary material is available for this article at and accessible for authorised users.     

A unique cyanide-bridged three-dimensional (3-D) copper(II)-copper(I) mixed-valence polymer containing 1-D water tapes with cyclic pentamer units

A unique cyano-bridged copper(II)-copper(I) mixed-valence polymer, {[Cu(3)(CN)(4)(H(2)O)(3)](H(2)O)(2)}(n) (1), has been prepared and structurally determined by X-ray diffraction. The cyanide anions with (mu(2),eta(2)) and (mu(3),eta(2)) bridging modes connect the copper centers into a complicated zeolite-like 3-D network. Of further interest, coordinated and lattice water molecules in this structure form 1-D hydrogen-bonded water tapes consisting of linked cyclic pentamer clusters.     

Determination of affinity constants and response factors of the noncovalent dimer of gramicidin by electrospray ionization mass spectrometry and mathematical modeling

The dimerization of gramicidin, a 15-residue membrane peptide, in solution can be viewed as a model for protein-protein interactions. We reported previously that the dimer can be observed when electrosprayed from organic solvents and that the abundances of the dimer depends on the dielectric constant of the solvent. Here, we report an effort to determine an affinity constant for the dimerization of gramicidin by using gas-phase abundance. Two issues affecting the determination are the electrospray-induced dissociation of the dimer and discrimination in the electrospray of the dimer compared with the monomer. Other methods developed for the purpose of determining affinity from mass spectral abundance do not address the dissociation of the complex in the gas phase or can not be applied for cases of low affinity constant, K(a). We present a mathematical model that uses the ratio of the signal intensities of the dimer and the monomer during a titration. The model also incorporates the dissociation and an electrospray ionization-response factor of the dimer for extracting the affinity constant for the dimerization of gramicidin. The dimerization constants from the new method agree within a factor of two with values reported in the literature.     

Relationship between the density of supercritical CO<Subscript>2</Subscript> + ethanol binary system and its critical properties

The dependent relation between temperature and pressure of supercritical CO₂+ ethanol binary system under the pressure range from 5 to 10 MPa with the variety of densities and mole fractions of ethanol that range from 0 to 2% was investigated by the static visual method in a constant volume. The critical temperature and pressure were experimentally determined simultaneously. The PTρ figures at different ethanol contents were described based on the determined pressure and temperature data, from which pressure of supercritical CO₂ + ethanol binary system was found to increase linearly with the increasing temperature. P-T lines show certain convergent feature in a specific concentration of ethanol and the convergent points shift to the region of higher temperature and pressure with the increasing ethanol compositions. Furthermore, the effect of density and ethanol concentration on the critical point of CO₂ + ethanol binary system was discussed in details. Critical points increase linearly with the increasing mole fraction of ethanol in specific density and critical points change at different densities. The critical compressibility factors Z_c of supercritical CO₂ + ethanol binary systems at different compositions of ethanol were calculated and Z _c -ρ figure was obtained accordingly. It was found from Z _c -ρ figure that critical compressibility factors of supercritical CO₂ unitary or binary systems decline linearly with the increasing density, by which the critical point can be predicted precisely.     

Alternative mobile phases for the reversed-phase high-performance liquid chromatography of peptides and proteins

The use of a high content of acetic acid as mobile phase additive for the reversed-phase high-performance liquid chromatography (RP-HPLC) of several proteins and extracts of biological tissues was evaluated for a divinylbenzene (DVB)-based stationary phase, and the separations obtained with acetic acid gradients in acetonitrile, isopropanol or water were compared with classical polypeptide RP-HPLC on silica C4 with trifluoroacetic acid (TFA)-acetonitrile. The separation patterns for recombinant derived interleukin-1 beta (IL-1 beta) on the C4 column eluted with TFA-acetonitrile and the DVB column eluted with acetic acid-acetonitrile were similar, but only the polymeric column was able to separate the components present in an iodinated IL-1 beta preparation. Neither eluent had any harmful effect on the biological activity of IL-1 beta isolated after RP-HPLC. Several standard proteins could be separated when the polymeric column was eluted with acetic acid gradients in acetonitrile, isopropanol or water and, although the separation efficiency with acetic acid in water was lower than that in combination with classical organic modifiers, insulin, glucagon and human growth hormone (hGH) were eluted as sharp, symmetrical peaks. The recoveries of insulin and hGH were comparable for all three mobile phases (80-90%). The separation patterns obtained from a crude acetic acid extract of a normal and a diabetic, human pancreas analysed using acetic acid gradients with or without organic modifiers were found to be similar and comparable to those obtained on a silica C4 column eluted with an acetonitrile gradient in TFA. The principal differences resulted from the use of different UV wavelengths (215 nm for TFA-acetonitrile, 280 nm for acetic acid). Acetic acid extracts of recombinant derived hGH-producing Escherichia coli were separated on the DVB column eluted with an acetic acid gradient in water. Although the starting material was a highly complex mixture, the hGH isolated after this single-step purification was surprisingly pure (as judged by sodium dodecyl sulphate-polyacrylamide gel electrophoresis). Consequently several (pure) polypeptides and complex biological samples were separated on a polymeric stationary phase eluted with acetic acid gradients in water without the use of organic modifiers.     

Organic/inorganic hybrid vesicles based on a reactive block copolymer

Presented in this communication is a novel hybrid vesicle with a cross-linked polyorganosiloxane wall based on a new reactive block copolymer, poly(ethylene oxide)-block-poly(3-(trimethoxysilyl)propyl methacrylate) (PEO-b-PTMSPMA), which was synthesized by atom transfer radical polymerization. The vesicles were prepared first by self-assembly of the block copolymer in a selective solvent, and then the PTMSPMA block was subjected to hydrolysis and polycondensation reaction to fix vesicle wall in the presence of triethylamine as a catalyst. Transmission electron microscopy, scanning electron microscopy, NMR, and light scattering have been used to characterize the vesicles.     

Synthesis, Structure, and Antimicrobial Activity of Complexes of Pt(II), Pd(II), and Ni(II) with the Condensation Product of 2-(Diphenylphosphino)benzaldehyde and Semioxamazide

Complexes of Pt(II), Pd(II), and Ni(II) with the condensation derivative of 2-(diphenylphosphino)benzaldehyde and semioxamazide were synthesized, characterized, and their antimicrobial activity was evaluated. The ligand and the complexes were characterized by spectroscopic methods with the particular accent on NMR spectral analysis. For the palladium(II) complex, the crystal structure was determined by X-ray analysis. In all the complexes the ligand is coordinated as a tridentate via a P, N, O donor set. The Pd(II) and Pt(II) complexes have a square planar geometry, whereas the geometry of the Ni(II) complex is tetrahedral. The ligand showed antibacterial and antifungal activity, which was enhanced upon complexation.