用镍硅氧化物源横向诱导晶化的多晶硅薄膜

采用磁控溅射法,以镍硅合金为靶,制备了一种适用于金属诱导横向晶化的氧化物镍源——自缓释镍源.该镍源在内部构成和晶化现象上都不同于纯金属镍源.采用该镍源制备低温多晶硅材料,晶化速率不明显依赖于镍源薄膜的厚度,且晶化多晶硅膜内的残余镍量亦可有效降低,可为薄膜晶体管提供宽的工艺窗口.本文对用纯金属镍源所得多晶硅薄膜的晶化率、表面粗糙度、电学特性等与溅射条件的关系进行了研究,并对相应结果进行了讨论. 关键词： 自缓释 金属诱导横向晶化 多晶硅薄膜 低温制备与退火     

用镍硅氧化物源横向诱导晶化的多晶硅薄膜

采用磁控溅射法,以镍硅合金为靶,制备了一种适用于金属诱导横向晶化的氧化物镍源——自缓释镍源.该镍源在内部构成和晶化现象上都不同于纯金属镍源.采用该镍源制备低温多晶硅材料,晶化速率不明显依赖于镍源薄膜的厚度,且晶化多晶硅膜内的残余镍量亦可有效降低,可为薄膜晶体管提供宽的工艺窗口.本文对用纯金属镍源所得多晶硅薄膜的晶化率、表面粗糙度、电学特性等与溅射条件的关系进行了研究,并对相应结果进行了讨论.     

On the periodic solutions for both nonlinear differential and difference equations: A unified approach

A direct and unifying scheme for disclosure of periodic wave solutions of both nonlinear differential and difference equations is presented. The scheme is based on Hirota's bilinear form and certain Riemann theta function formulae. The relations between the periodic wave solutions and soliton solutions are rigorously established.     

Flexible sliced designs for computer experiments

Sliced Latin hypercube designs are popularly adopted for computer experiments with qualitative factors. Previous constructions require the sizes of different slices to be identical. Here we construct sliced designs with flexible sizes of slices. Besides achieving desirable one-dimensional uniformity, flexible sliced designs (FSDs) constructed in this paper accommodate arbitrary sizes for different slices and cover ordinary sliced Latin hypercube designs as special cases. The sampling properties of FSDs are derived and a central limit theorem is established. It shows that any linear combination of the sample means from different models on slices follows an asymptotic normal distribution. Some simulations compare FSDs with other sliced designs in collective evaluations of multiple computer models.     

Defects in ZnO nanorods prepared by a hydrothermal method

ZnO nanorod arrays were fabricated using a hydrothermal method. The nanorods were studied by scanning electron microscopy, photoluminescence (PL), time-resolved PL, X-ray photoelectron spectroscopy, and positron annihilation spectroscopy before and after annealing in different environments and at different temperatures. Annealing atmosphere and temperature had significant effects on the PL spectrum, while in all cases the positron diffusion length and PL decay times were increased. We found that, while the defect emission can be significantly reduced by annealing at 200 degrees C, the rods still have large defect concentrations as confirmed by their low positron diffusion length and short PL decay time constants.     

Control of defect concentrations within a semiconductor through adsorption

The technologically useful properties of a crystalline solid depend upon the concentration of defects it contains. Here we show that defect concentrations as deep as 0.5 microm within a semiconductor can be profoundly influenced by gas adsorption. Self-diffusion rates within silicon show that nitrogen atoms adsorbed at less than 1% of a monolayer lead to defect concentrations that vary controllably over several orders of magnitude. The results show that previous measurements of diffusion and defect thermodynamics in semiconductors may have suffered from neglect of adsorption effects.     

Measuring inter-DNA potentials in solution

Interactions between short strands of DNA can be tuned from repulsive to attractive by varying solution conditions and have been quantified using small angle x-ray scattering techniques. The effective DNA interaction charge was extracted by fitting the scattering profiles with the generalized one-component method and inter-DNA Yukawa pair potentials. A significant charge is measured at low to moderate monovalent counterion concentrations, resulting in strong inter-DNA repulsion. The charge and repulsion diminish rapidly upon the addition of divalent counterions. An intriguing short range attraction is observed at surprisingly low divalent cation concentrations, approximately 16 mM Mg2+. Quantitative measurements of inter-DNA potentials are essential for improving models of fundamental interactions in biological systems.     

Analysis of a bi-piezoelectric ceramic layer with an interfacial crack subjected to anti-plane shear and in-plane electric loading

The behaviour of a bi-piezoelectric ceramic layer with a centre interfacial crack subjected to anti-plane shear and in-plane electric loading has been studied. The dislocation density functions and the Fourier integral transform method have been employed to eliminate the problem of singular integral equations. The normalized energy release rate, stress and electrical displacement intensity factors, G/G₀,K_III/K_III0 and K_D/K_D0, respectively, were determined for different geometric and property parameters by use of two different crack surface electric boundary conditions, i.e. impermeable and permeable. It has been shown that the effects of the thickness and material constants of the piezoelectric layer on all the three parameters, i.e. G/G₀,K_III/K_III0 and K_D/K_D0 were significant.     

Inhibitory activity and conformation changes of soybean trypsin inhibitors induced by ultrasound

The inhibitory activities, sulfhydryl bonds and far-UV circular dichroism (CD) spectra of Kunitz and Bowman–Birk soybean trypsin inhibitors (KTI and BBTI) were measured before and after ultrasound treatments. The differences between KTI and BBTI in conformation changes and resistance to ultrasound were observed. The secondary structures of KTI were found to be composed of β-sheet (22.5%), β-turn (16.2%) and random coils (61.4%) while that of BBTI composed of only β-sheet (52.6%) and random coils (47.4%). KTI lost its inhibitory activity more quickly than BBTI, proportionally to the ultrasound amplitudes and sonication durations used. Relevant synchronous phenomena observed included the inactivation of KTI, significant rise in sulfhydryl content and corresponding conformation changes, in which there were dramatic decreases in both β-turn and random coil contents and increase in the β-sheet structure over the entire sonication duration and ultrasonic amplitude scale used by the study. Ultrasound affected the activities and conformations of KTI and BBTI by exerting an influence on their disulfide bonds. For KTI, up to 55% of inhibitory activity could be inactivated, at which about 71.5% of disulfide bonds were altered and the [θ]_200nm value was changed from native −2545 deg cm² dmol⁻¹ to −1827 deg cm² dmol⁻¹. Whereas for BBTI, far-UV CD spectra, β-sheet and random structures were barely affected, only about 5.29% of disulfide bonds were found altered and the [θ]_200nm value was changed only from native −797 deg cm² dmol⁻¹ to −700 deg cm² dmol⁻¹. It is concluded that ultrasound inactivates KTI by inducing a reduction in the disulfide bonds and then changes the conformations.     

Lab-in-cell based on spontaneous amino-yne click polymerization

Unnatural reaction in the living cells is a powerful tool for biological research. However, the polymerization inside cells is rarely reported. In this work, a lab-in-cell is illustrated based on our developed spontaneous amino-yne click polymerization. Carbonyl group activated terminal diyne can spontaneously polymerize with tetraphenylethene(TPE)-containing primary diamine inside cells, and polymer with weight-average molecular weight of 7,300 was yielded. By utilizing this in vivo amino-yne click polymerization and taking advantage of the aggregation-induced emission feature of TPE, a "turn-on" cell imaging was realized,and in-situ killing of cells was also acquired by destroying the structures of actin and tubulin, which cannot be realized by preprepared polymer. This strategy provides a useful platform and holds great promise in biochemistry and therapy applications.