Thermal and mass spectrometric fragmentation of esters of deuterated long chain carboxylic acids

A method combining thermal fragmentation and mass spectrometry for the determination of the position of double bonds in an unsaturated ester is presented. The thermal fragmentation of methyl esters of deuterated long chain carboxylic acids yields a homologous series of olefins plus a homologous series of unsaturated esters. The positions of the deuterium atoms in the original ester are revealed by the deuterium content of its fragments as determined by mass spectrometry. Therefore, the positions of double bonds of a polyunsaturated acid can be determined by pyrolysis after saturation by deuterium. The structures of the unsaturated fragments are ascertained by mass spectrometric method, and the formation of the ion [M – 32] in the mass spectrometric fragmentation of unsaturated methyl esters is studied by means of deuterium labeling.     

Applying Direct Yellow 11 to a modified Simons’ staining assay

For quantification of overall fiber accessibility of lignocellulosic substrates, Direct Yellow 11 (C.I. 40000) is a suitable alternative to the discontinued Pylam Products’ dye Direct Orange 15 (C.I. 40002/40003). In this study we present a side-by-side comparison between the two azo-stilbene dyes. We characterize individual dye fractions and provide equations to determine individual concentrations. We present a modified Simons’ staining protocol incorporating the high molecular weight fraction of Direct Yellow 11. We perform tests on lignin, cellulosic, and lignocellulosic materials. In all tests, the two dyes perform similarly and satisfy many accessibility measurement criteria. We demonstrate that the adsorption of Direct Yellow 11 onto a substrate correlates with that substrate’s propensity for enzymatic hydrolysis. We confirm this correlation on a series of organic solvent pretreatments and on a series of lignocellulosic substrates. Finally, we outline the inherent limitations of performing adsorption experiments with Direct Yellow 11 and other high molecular weight dyes.     

Strategies in boosting photosensitization for biomedical applications

Science China Chemistry -     

Structural and process controls of AIEgens for NIR-II theranostics

Aggregation-induced emission (AIE) is a cutting-edge fluorescence technology, giving highly-efficient solid-state photoluminescence. Particularly, AIE luminogens (AIEgens) with emission in the range of second near-infrared window (NIR-II, 1000–1700 nm) have displayed salient advantages for biomedical imaging and therapy. However, the molecular design strategy and underlying mechanism for regulating the balance between fluorescence (radiative pathway) and photothermal effect (non-radiative pathway) in these narrow bandgap materials remain obscure. In this review, we outline the latest achievements in the molecular guidelines and photophysical process control for developing highly efficient NIR-II emitters or photothermal agents with aggregation-induced emission (AIE) attributes. We provide insights to optimize fluorescence efficiency by regulating multi-hierarchical structures from single molecules (flexibilization) to molecular aggregates (rigidification). We also discuss the crucial role of intramolecular motions in molecular aggregates for balancing the functions of fluorescence imaging and photothermal therapy. The superiority of the NIR-II region is demonstrated by fluorescence/photoacoustic imaging of blood vessels and the brain as well as photothermal ablation of the tumor. Finally, a summary of the challenges and perspectives of NIR-II AIEgens for in vivo theranostics is given.

Structural and process controls of NIR-II AIEgens realize manipulating of radiative (R) and nonradiative (NR) decay for precise theranostics.     

Surface functionalization of polymer latex particles. II. Catalytic oxidation of poly(methylstyrene) latexes in the presence of cetyltrimethylammonium bromide

Surface-functionalized cationic poly(methylstyrene) (PMS) latex particles containing aldehyde and carboxylic acid groups were successfully achieved via an emulsion polymerization of 3(4)-methylstyrene in the presence of cetyltrimethylammonium bromide, followed by an in-situ oxidation catalyzed by copper chloride and tert-butyl hydroperoxide (t-BuOOH). Factors such as the type of metal catalyst, oxidant, and their concentration strongly affected the rate of oxidation. Step addition of t-BuOOH resulted in both a higher degree of oxidation and a more uniform distribution of particle size of the functionalized PMS as compared to the batch addition method. The effect of organic solvent was found to be insignificant, and the oxidation could still proceed in its absence. The particle sizes increased significantly during the oxidation but could be controlled by using crosslinked PMS latexes. Finally, the versatility of this oxidation process was demonstrated by oxidation of the polymer with a solid loading as high as 28%. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35 : 3585–3593, 1997     

Oscillating laminar electrokinetic flow in infinitely extended rectangular microchannels

This paper has addressed analytically the problem of laminar flow in microchannels with rectangular cross-section subjected to a time-dependent sinusoidal pressure gradient and a sinusoidal electric field. The analytical solution has been determined based on the Debye-Hückel approximation of a low surface potential at the channel wall. We have demonstrated that Onsager's principle of reciprocity is valid for this problem. Parametric studies of streaming potential have shown the dependence of the electroviscous effect not only on the Debye length, but also on the oscillation frequency and the microchannel width. Parametric studies of electroosmosis demonstrate that the flow rate decreases due to an increase in frequency. The obtained solutions for both the streaming potential and electroosmotic flows become those for flow between two parallel plates in the limit of a large aspect ratio.     

Tunable Linear and Nonlinear Optical Properties from Room Temperature Phosphorescent Cyclic Triimidazole-Pyrene Bio-Probe

Organic materials with multiple emissions tunable by external stimuli represent a great challenge. TTPyr, crystallizing in different polymorphs, shows a very rich photophyisics comprising excitation-dependent fluorescence and phosphorescence at ambient conditions, and mechanochromic and thermochromic behavior. Transformation among the different species has been followed by thermal and X-ray diffraction analyses and the emissive features interpreted through structural results and DFT/TDDFT calculations. Particularly intriguing is the polymorph TTPyr(HT), serendipitously obtained at high temperature but stable also at room temperature, whose non-centrosymmetric structure guarantees an SHG efficiency 10 times higher than that of standard urea. Its crystal packing, where only the TT units are strongly rigidified by π-π stacking interactions while the Pyr moieties possess partial conformational freedom, is responsible for the observed dual fluorescence. The potentialities of TTPyr for bioimaging have been successfully established.     

The dynamics of impacting water droplets on alkanethiol self-assembled monolayers with co-adsorbed CH3 and CO2H terminal groups

The impact of water droplets (diameter 3.6 mm) at a fixed Weber number of 59 on solid surfaces with precisely tailored surface wettabilities was studied experimentally using a high-speed imaging camera at 2500 frames per second. Solid surface wettability was varied using four fractional mixtures of self-assembled monolayers of 1-octadecanethiol and 16-mercaptohexadecanoic acid. The surfaces so obtained are characterized for contact angle and chemical functionality using the axisymmetric drop shape analysis profile (ADSA-P) technique and Fourier transform infrared spectroscopy (FT-IR). Our results correlate the wetting effects of the impacting droplets with the surface energy and contact angle measurements of the tailored surfaces. Literature models for the maximum spreading diameter are employed and compared with those from our experiments. An equation is also proposed for the maximum spreading diameter which makes use of the correct contact angles and results in the least error among the models considered. As a consequence of Young's equation, the correct contact angles to be used for droplet impact dynamics should be the corresponding advancing angles on a smooth substrate of interest. We also conclude that accurate examination of literature models requires careful experimentation on impact dynamic data on well-prepared and characterized surfaces such as those presented here.     

Polymer and azo-dye composite: a photo-alignment layer for liquid crystals

In this article, we disclose a method to fabricate polymer-stabilised azo-dye photo alignment layers for liquid crystal. The idea includes the introduction of polymer network in the alignment layer, in optimal concentration, followed by two-step irradiation. The stabilised photo-alignment layer has been explored for different aspects of the display-related parameters, viz. anchoring energy, stability for various display-related environments as a function of concentration of monomer and irradiation, residual DC and voltage holding ratio. The composite photo-alignment layer offers well-suited parameters for the liquid crystal alignment and therefore could find application in a variety of modern photonic and display devices.