Trace determination of hexabromocyclododecane diastereomers in water samples with temperature controlled ionic liquid dispersive liquid phase microextraction

A novel temperature controlled ionic liquid dispersive liquid phase microextraction(TCIL-DLPME) coupled with rapid resolution liquid chromatography-electrospray tandem mass spectrometry(RRLC-ESI-MS-MS) has been developed for the enrichment and determination of three hexabromocyclododecane diastereomers(HBCDs) in water samples.Green solvent ionic liquid(IL) was used as extraction solvent instead of toxic organic solvents.This technique also avoided the usage of dispersive solvent.Some important parameters that might affect the extraction efficiency were optimized.Under the optimum conditions,good linear relationship,sensitivity and reproducibility were obtained.All the limits of detection for the three diastereomers were 0.1 ng/ mL.The linear range was obtained in the range of 1-100 ng/mL for the total amount of three HBCD diastereomers.It was satisfactory to analyze real environmental water samples with the recoveries ranging from 77.2%to 99.3%.The main advantage of the method is toxic organic solvent-free.     

丝网印刷法制备高催化活性对电极

对电极在染料敏化太阳能电池（DSCs）中主要起催化氧化还原反应及收集电荷的作用,铂对电极常用的制备方法为磁控溅射法,但其成本较高,制备条件苛刻. 本文通过引入低成本的表面活性剂Span-85,所制得的铂对电极的附着力、透光率和均匀性显著改善,实现了面积可控,与两步浸泡法和旋涂热解法制备的对电极在DSCs中的光电转换效率分别为7.30%,6.96%和7.03%. 紫外-可见吸收光谱、扫描电镜和附着力测试等结果表明,（1）添加表面活性剂有利于增加附着力及改善透光率和均匀性;（2）使用该法制备的Pt/FTO对电极的透光率与两步浸泡法制作的相同,且铂粒子分布更加均匀. 电化学阻抗图谱、塔菲尔极化曲线和循环伏安曲线结果表明,丝网印刷方法制备的Pt/FTO对电极具有更加优异的催化性能,且该法更有利于降低其生产成本和大规模生产.     

Metal‐Free Catalyst for the Chemoselective Methylation of Amines Using Carbon Dioxide as a Carbon Source

N‐methylation of amines is an important step in the synthesis of many pharmaceuticals and has been widely applied in the preparation of other key intermediates and chemicals. Therefore, the development of efficient methylation methods has attracted considerable attention. In this respect, carbon dioxide is an attractive C₁ building block because it is an abundant, renewable, and nontoxic carbon source. Consequently, we developed a highly chemoselective, metal‐free catalytic system that operates under ambient conditions for the N‐methylation of amines.     

Low‐Background,Highly Sensitive DNA Biosensor by Using an Electrically Neutral Cobalt(II) Complex as the Redox Hybridization Indicator

An electrically neutral cobalt complex, [Co(GA)₂(phen)] (GA=glycollic acid, phen=1,10‐phenathroline), was synthesized and its interactions with double‐stranded DNA (dsDNA) were studied by using electrochemical methods on a glassy carbon electrode (GCE). We found that [Co(GA)₂(phen)] could intercalate into the DNA duplex through the planar phen ligand with a high binding constant of 6.2(±0.2)×10⁵ M ^?1. Surface studies showed that the cobalt complex could electrochemically accumulate within the modified dsDNA layer, rather than within the single‐stranded DNA (ssDNA) layer. Based on this feature, the complex was applied as a redox‐active hybridization indicator to detect 18‐base oligonucleotides from the CaMV35S promoter gene. This biosensor presented a very low background signal during hybridization detection and could realize the detection over a wide kinetic range from 1.0×10^?14 M to 1.0×10^?8 M , with a low detection limit of 2.0 fM towards the target sequences. The hybridization selectivity experiments further revealed that the complementary sequence, the one‐base‐mismatched sequence, and the non‐complementary sequence could be well‐distinguished by the cobalt‐complex‐based biosensor.     

An efficient high-speed counter-current chromatography method for the preparative separation of sesquiterpenoids from the rhizomes of Cyperus rotundus L. combined with evaluation of the anti-inflammation activity in vitro and molecular docking

Cyperus rotundus L. has been extensively used in ancient medication for the treatment of different disorders worldwide, in which sesquiterpenes are the most representative components. In this study, sesquiterpenes were effectively purified by two-dimensional counter-current chromatography in combination with continuous injection and inner-recycling mode with a solvent system of n-hexane/ethyl acetate/methanol/water (1:0.2:1:0.2, v/v/v/v). For one-dimension separation, continuous injection mode was used with three times injection and the inner-recycling mode was adopted for the separation of two mixtures for two-dimensional separation. Finally, four sesquiterpenoids, including scariodione ( 1 ), cyperenoic acid ( 2 ), scariodione ( 3 ), and α-cyperone ( 4 ), were obtained with purities over 98%. Mass spectrometry and nuclear magnetic resonance were applied to identify their structures. The results from the anti-inflammation effect with zebrafish demonstrated that cyperenoic acid exhibited stronger anti-inflammation activity. Molecular docking results suggested that cyperenoic acid possessed lower binding energies –9.4545 kcal/mol with 1CX2 to form formed hydrogen bond interaction with ARG120. In general, all the obtained findings proved that the strong anti-inflammation capacity of cyperenoic acid can have the potential of being adopted for treating diseases resulting from inflammation.     

Recycling of Primary Lithium Batteries Production Residues

Production waste of primary lithium batteries constitutes a considerable secondary lithium feedstock. Although the recycling of lithium batteries is a widely studied field of research, the metallic residues of non-rechargeable lithium battery production are disposed of as waste without further recycling. The risks of handling metallic Li on a large scale typically prevent the metal from being recycled. A way out of this situation is to handle Li in an aqueous solution, from where it can be isolated as Li₂CO₃. However, the challenge in hydrometallurgical treatment lies in the high energy release during dissolution and generation of H₂. To reduce these process-related risks, the Li sheet metal punching residues underwent oxidative thermal treatment from 300 to 400 °C prior to dissolution in water. Converting Li metal to Li₂O in this initial process step results in an energy release reduction of ∼70 %. The optimal oxidation conditions have been determined by experimental design varying three factors: temperature, Li metal sheet thickness, and residence time. With 96.9±2.6 % almost the entire Li amount is converted to Li₂O, after 2.5 h treatment at 400 °C for a Li sheet thickness of 1.99 mm. Final precipitation with CO₂ yields 85.5±3.0 % Li₂CO₃. Using pure Li sheets, the product Li₂CO₃ is obtained in battery-grade quality (>99.5 %). Non-precipitated Li is recirculated into the process on the stage of dissolving Li₂O, thus avoiding loss of material.     

Variability in the Formation and Framework Polymorphism of Metal-organic Frameworks based on Yttrium(III) and the Bifunctional Organic Linker 2,5-Dihydroxyterephthalic Acid

Depending on the solvothermal reaction conditions, we obtained three different metal-organic frameworks with yttrium(III) as metal component and 2,5-dihdyroxyterepthalic acid (H₄dhtp) as bifunctional organic linker: Y₂(H₂dhtp)₃(dmf)₄ · (dmf)₂ (CPO-29) contains dinuclear, paddle-wheel like inorganic secondary building units (SBUs) connected by the organic linker to a network with α-Po topology, while Y₂(H₂dhtp)(dhtp)(dmf)₂ (CPO-30) and Y₂(H₂dhtp)(dhtp)(dmf)₂(H₂O)₂ · (H₂O)₄ (CPO-31) contain one-dimensional inorganic SBUs that differ in how the half- and fully deprotonated ligands are connected to and arranged around them. Only the carboxylic acid groups of the organic linker are deprotonated in CPO-29, while CPO-30 and CPO-31 contain both 2,5-dihydroxyterephthalate (H₂dhtp^2–) linkers and fully deprotonated 2,5-dioxidoterephthalate (dhtp^4–) linkers. All three compounds contain large volumes filled with solvent, but we were able to demonstrate permanence of porosity only for CPO-30. Variable temperature powder X-ray diffraction reveals that CPO-29 and CPO-31 undergo discontinuous phase transitions upon heating, and the flexibility of the framework structure indicated by these might be the reason for the inability to access the pore volume. Desolvated CPO-30 and CPO-31 are polymorphs, whose network structures differ in whether the H₂dhtp^2– and dhtp^4– linkers are located in cis or trans arrangement around the inorganic SBU.