Dyeing behavior and mechanism of Crocein Orange G on carboxymethyl cotton fabric

Cellulose - Traditional cotton fiber dyeing requires an abundance of salt, which leads to environmental pollution. Consequently, decreasing or eliminating the use of salt has become the primary...     

Insights into LiAlH4 Catalyzed Imine Hydrogenation

Commercial LiAlH₄ can be used in catalytic quantities in the hydrogenation of imines to amines with H₂. Combined experimental and theoretical investigations give deeper insight in the mechanism and identifies the most likely catalytic cycle. Activity is lost when Li in LiAlH₄ is exchanged for Na or K. Exchanging Al for B or Ga also led to dramatically reduced activities. This indicates a heterobimetallic mechanism in which cooperation between Li and Al is crucial. Potential intermediates on the catalytic pathway have been isolated from reactions of MAlH₄ (M=Li, Na, K) and different imines. Depending on the imine, double, triple or quadruple imine insertion has been observed. Prolonged reaction of LiAlH₄ with PhC(H)=NtBu led to a side-reaction and gave the double insertion product LiAlH₂[N]₂ ([N]=N(tBu)CH₂Ph) which at higher temperature reacts further by ortho-metallation of the Ph ring. A DFT study led to a number of conclusions. The most likely catalyst for hydrogenation of PhC(H)=NtBu with LiAlH₄ is LiAlH₂[N]₂. Insertion of a third imine via a heterobimetallic transition state has a barrier of +23.2 kcal mol⁻¹ (ΔH). The rate-determining step is hydrogenolysis of LiAlH[N]₃ with H₂ with a barrier of +29.2 kcal mol⁻¹. In agreement with experiment, replacing Li for Na (or K) and Al for B (or Ga) led to higher calculated barriers. Also, the AlH₄⁻ anion showed very high barriers. Calculations support the experimentally observed effects of the imine substituents at C and N: the lowest barriers are calculated for imines with aryl-substituents at C and alkyl-substituents at N.     

Generation and Identification of the Linear OCBNO and OBNCO Molecules with 24 Valence Electrons

Two structural isomers containing five second-row element atoms with 24 valence electrons were generated and identified by matrix-isolation IR spectroscopy and quantum chemical calculations. The OCBNO complex, which is produced by the reaction of boron atoms with mixtures of carbon monoxide and nitric oxide in solid neon, rearranges to the more stable OBNCO isomer on UV excitation. Bonding analysis indicates that the OCBNO complex is best described by the bonding interactions between a triplet-state boron cation with an electron configuration of (2s)⁰(2p_σ)⁰(2p_π)² and the CO/NO⁻ ligands in the triplet state forming two degenerate electron-sharing π bonds and two ligand-to-boron dative σ bonds.     

Soluble Congeners of Prior Insoluble Shape-Persistent Imine Cages

One of the most applied reaction types to synthesize shape-persistent organic cage compounds is the imine condensation reaction and it is assumed that the formed cages are thermodynamically controlled products due to the reversibility of the imine condensation. However, most of the synthesized imine cages reported are formed as precipitate from the reaction mixture and therefore rather may be kinetically controlled products. There are even examples in literature, where resulting cages are not soluble at all in common organic solvents to characterize or study their formation by NMR spectroscopy in solution. Here, a triptycene triamine containing three solubilizing n-hexyloxy chains has been used to synthesize soluble congeners of prior insoluble cages. This allowed us to study the formation as well as the reversibility of cage formation in solution by investigating exchange of building blocks between the cages and deuterated derivatives thereof.     

Shape-Adaptability and Redox-Switching Properties of a Di-Gold Metallotweezer

The use of a carbazolyl-connected di-gold(I) metallotweezer for the encapsulation of several electron-poor organic substrates, and a planar Au(III) complex containing a CNC pincer ligand, is described. The binding affinity of the receptor depends on the electron-deficient character of the planar guest, with larger association constants found for the more electron-poor guests. The X-ray diffraction molecular structures of two host:guest adducts show that the host approaches its arms in order to facilitate the optimum interaction with the surface of the planar guests, in a clear example of an guest-induced fit conformational arrangement. The electrochemical studies of the encapsulation of N,N’-dimethyl-naphthalenetetracarboxy diimide (NTCDI) show that the redox active guest is released from the receptor upon one electron reduction, thus constituting an example of redox-switchable binding.     

Tetrasubstituted Peropyrenes Formed by Reductive Aromatization: Synthesis,Functionalization and Characterization

The chromophore class of 1,3,8,10-tetrasubstituted peropyrenes was effectively synthesized from peropyrenequinone via a Zn-mediated reductive aromatization approach. In one step, a symmetric functionalization of the peropyrene backbone introducing silylethers ( 2 , 3 ), pivaloyl ( 4 ), triflyl ( 5 ) and also phosphinite ( 6 ) groups was established. Furthermore, the potential of using 4 and 5 in transition metal catalysed cross couplings was explored leading to 1,3,8,10-tetraaryl ( 8 - 11 ) and tetraalkynyl ( 7 ) peropyrenes. The influence of various substituents on the optoelectronic properties of these π-system extended peropyrenes was investigated in solid state by means of X-ray crystallography, in solution by means of UV-Vis and fluorescence spectroscopy and by their redox properties studied via cyclic voltammetry. By comparison with DFT and TD-DFT calculations, it could be elucidated that introduction of a broad variety of substituents in such versatile one or two step procedures leads to peropyrenes with easily tunable HOMO and LUMO energies ranging in a gap window of 0.8 eV. The frontier molecular orbital energies identify the target molecules as promising candidates for hole transporting semiconductors.     

Stability of AgIII towards Halides in Organosilver(III) Complexes

The involvement of silver in two-electron Ag^I/Ag^III processes is currently emerging. However, the range of stability of the required and uncommon Ag^III species is virtually unknown. Here, the stability of Ag^III towards the whole set of halide ligands in the organosilver(III) complex frame [(CF₃)₃AgX]⁻ (X=F, Cl, Br, I, At) is theoretically analyzed. The results obtained depend on a single factor: the nature of X. Even the softest and least electronegative halides (I and At) are found to form reasonably stable Ag^III−X bonds. Our estimates were confirmed by experiment. The whole series of nonradiative halide complexes [PPh₄][(CF₃)₃AgX] (X=F, Cl, Br, I) has been experimentally prepared and all its constituents have been isolated in pure form. The pseudohalides [PPh₄][(CF₃)₃AgCN] and [PPh₄][(CF₃)₃Ag(N₃)] have also been isolated, the latter being the first silver(III) azido complex. Except for the iodo compound, all the crystal and molecular structures have been established by single-crystal X-ray diffraction methods. The decomposition paths of the [(CF₃)₃AgX]⁻ entities at the unimolecular level have been examined in the gas phase by multistage mass spectrometry (MSⁿ). The experimental detection of the two series of mixed complexes [CF₃AgX]⁻ and [FAgX]⁻ arising from the corresponding parent species [(CF₃)₃AgX]⁻ demonstrate that the Ag−X bond is particularly robust. Our experimental observations are rationalized with the aid of theoretical methods. Smooth variation with the electronegativity of X is also observed in the thermolyses of bulk samples. The thermal stability in the solid state gradually decreases from X=F (145 °C, dec.) to X=I (78 °C, dec.) The experimentally established compatibility of Ag^III with the heaviest halides is of particular relevance to silver-mediated or silver-catalyzed processes.     

Lateral Metallation and Redistribution Reactions of Sodium Ferrates Containing Bulky 2,6-Diisopropyl-N-(trimethylsilyl)anilide Ligands

Alkali-metal ferrates containing amide groups have emerged as regioselective bases capable of promoting Fe−H exchanges of aromatic substrates. Advancing this area of heterobimetallic chemistry, a new series of sodium ferrates is introduced incorporating the bulky arylsilyl amido ligand N(SiMe₃)(Dipp) (Dipp=2,6-iPr₂-C₆H₃). Influenced by the large steric demands imposed by this amide, transamination of [NaFe(HMDS)₃] (HMDS=N(SiMe₃)₂) with an excess of HN(SiMe₃)(Dipp) led to the isolation of heteroleptic [Na(HMDS)₂Fe{N(SiMe₃)Dipp}]_∞ ( 1 ) resulting from the exchange of just one HMDS group. An alternative co-complexation approach, combining the homometallic metal amides [NaN(SiMe₃)Dipp] and [Fe{N(SiMe₃)Dipp}₂] induces lateral metallation of one Me arm from the SiMe₃ group in the iron amide furnishing tetrameric [NaFe{N(SiCH₂Me₂)Dipp}{N(SiMe₃)Dipp}]₄ ( 2 ). Reactivity studies support that this deprotonation is driven by the steric incompatibility of the single metal amides rather than the basic capability of the sodium reagent. Displaying synergistic reactivity, heteroleptic sodium ferrate 1 can selectively promote ferration of pentafluorobenzene using one of its HMDS arms to give heterotrileptic [Na{N(SiMe₃)Dipp}(HMDS)Fe(C₆F₅)]_∞ ( 4 ). Attempts to deprotonate less activated pyridine led to the isolation of NaHMDS and heteroleptic Fe(II) amide [(py)Fe{N(SiMe₃)Dipp}(HMDS)] ( 5 ), resulting from an alternative redistribution process which is favoured by the Lewis donor ability of this substrate.     

A Comprehensive Study on the Full Series of Alkali-Metal Selenocyanates AI[SeCN] (AI=Li−Cs)

The full series of quasibinary alkali-metal selenocyanates was synthesized either by oxidation of the respective cyanides (A=Li−Rb) or by metathesis (A=Cs). For Li[SeCN] only ball-milling and subsequent annealing led to the isolation of the quasibinary selenocyanate. Their structures were refined from single-crystal and powder X-ray data. The respective solid-state IR and Raman spectra were interpreted with the aid of solid-state quantum-mechanical calculations and DSC-TGA measurements allowed for extraction of melting points. Only for Li[SeCN] a possible phase transition was observed that is discussed on the basis of VT-PXRD experiments. It is also the only quasibinary selenocyanate to form a hydrate (Li[SeCN] ⋅ 2H₂O).     

Formation and Structures of the μ4-Oxygen-Bridged High-Nuclearity Lead(II) Clusters from a Lead Propane-2-thiolate Complex

Journal of Cluster Science - Interaction of [Pb(SiPr)2]n with 1.5 equiv. of AgNO3 in DMF under aerobic conditions at room temperature gave a cationic lead-centered thiolate cluster...