反传热问题及其在深冷处理传热分析中的应用

深冷处理作为一种新的材料处理工艺,越来越受到人们的关注,目前深冷处理使材料性能提高的机理尤其是与升降温过程的耦合关系等还尚未完全清楚,需开展更深入的研究,而传热分析是此方面研究的基础。反传热分析方法是研究深冷处理传热问题的一种可行方法。较为详细地叙述了反传热问题的定义及其求解方法,介绍了反传热在深冷处理传热分析中的初步应用,并对深冷处理中应用反传热方法存在的问题进行了探讨。     

Production and detection of ultracold Cs2 molecules via four-photon adiabatic passage

We study theoretically how to produce and detect the ultracold ground-state Cs2molecule from Feshbach state. Numerical calculations are performed by solving the quantum Liouville equation based on multilevel Bloch model. The producing efficiency reaches 55% and the detecting efficiency is 31%. The producing and detecting efficiencies are closely related to the Rabi frequencies of laser pulses. The decay of relevant electronic and vibrational states obviously reduces the producing and detecting efficiencies.     

高光谱成像技术的柑橘植株叶片含氮量预测模型

氮素是果树生长发育的一种大量必需元素,及时准确地监控果树的氮营养状况,对果树的合理施肥、增产、优化果实品质以及减缓过量施氮引起的水资源污染具有重要意义。利用高光谱成像技术结合多变量统计学方法,建立了柑橘植株叶片的含氮量预测模型。研究步骤为：高光谱扫描、提取平均光谱曲线、预处理原始光谱数据、采用连续投影法提取特征波段和建立含氮量预测模型。从SG平滑、SNV、MSC、1-Der等11种预处理方法中筛选出的较优预处理方法是SG平滑、Detrending和SG平滑-Detrending。对应这三种最优预处理方法,先采用连续投影法挑选出各自的特征波长,然后将各特征波段下的光谱反射率作为偏最小二乘、多元线性回归和反向传播人工神经网络模型的输入,各自建立三个预测模型。从以上获得的9个预测模型中,得出两个最优模型SG平滑-Detrending-SPA-BPNN(R_p：0.851 3,RMSEP：0.188 1)和Detrending-SPA-BPNN(R_p：0.8609,RMSEP：0.159 5)。结果表明,利用高光谱数据测定柑橘叶片含氮量具有可行性。这为实时、准确地监控柑橘植株生长过程中叶片含氮量的变化以及合理科学的氮肥施加提供了一定的理论基础。     

Asynchronous sampling for ultrafast experiments with low momentum compaction at the ANKA ring

A high‐repetition‐rate pump–probe experiment is presented, based on the asynchronous sampling approach. The low‐α mode at the synchrotron ANKA can be used for a time resolution down to the picosecond limit for the time‐domain sampling of the coherent THz emission as well as for hard X‐ray pump–probe experiments, which probe structural dynamics in the condensed phase. It is shown that a synchronization of better than 1 ps is achieved, and examples of phonon dynamics of semiconductors are presented.     

A triple function linear fiber laser with passive mode-locking and continuous-wave single-wavelength and multiwavelength lasing

We propose a fiber laser that can operate with passive mode-locking pulse output, continuous single-wavelength emission, and continuous multiwavelength emission. It consists of a nonlinear optical loop mirror (NOLM) in a linear cavity. The NOLM is used to induce different kinds of intensity-dependent feedback, which determine the operation mode of the laser. We have experimentally demonstrated that the fiber laser can easily be switched between the operation modes. The results may find useful applications in optical communication and fiber sensing.     

Elastic stress fields caused by a dislocation in Ge x Si1−x /Si film-substrate system

The elastic stress fields caused by a dislocation in Ge_xSi_(1-x) epitaxial layer on Si substrate are investigated in this work. Based on the previous results in an anisotropic bimaterial system,the image method is further developed to determine the stress field of a dislocation in the film-substrate system under coupled condition. The film-substrate system is firstly transformed into a bimaterial system by distributing image dislocation densities on the position of the free surface. Then,the unknown image dislocation densities are solved by using boundary conditions,i.e.,traction free conditions on the free surface. Numerical simulation focuses on the Ge0.1Si0.9/Si film-substrate system. The effects of layer thickness,position of the dislocation and crystallographic orientation on the stress fields are discussed. Results reveal that both the stresses σxx,σxz at the free surface and the stress σxy,σyy,σyz on the interface are influenced by the layer thickness,but the former is stronger. In contrast to the weak dependence of stress field on the crystallographic orientation the stress field was strongly affected by dislocation position. The stress fields both in the film-substrate system and bimaterial system are plotted.     

Irregular elliptical plasmonic rings for engineering near-field and phase

Metallic glasses find wide applications in nanotechnology and micro electro-mechanical systems because of their unique physical properties due to their amorphous structures. The material removal mechanism in nanometric cutting of Cu₅₀Zr₅₀, a typical metallic glass, is studied using molecular dynamics method. The chip formation, workpiece deformation and scratching forces under various scratching depths, scratching velocities and temperatures are investigated. The effect of void defect on the cutting behaviors of metallic glass is also explored. The results show that the material removal in nanometric cutting process is based on extrusion instead of shearing, achieving a good understanding of material removal at the nanoscale.     

Statistical method for resolving the photon–photoelectron-counting inversion problem

A statistical inversion method is proposed for the photon–photoelectron-counting statistics in quantum key distribution experiment. With the statistical viewpoint, this problem is equivalent to the parameter estimation for an infinite binomial mixture model. The coarse-graining idea and Bayesian methods are applied to deal with this ill-posed problem, which is a good simple example to show the successful application of the statistical methods to the inverse problem. Numerical results show the applicability of the proposed strategy. The coarse-graining idea for the infinite mixture models should be general to be used in the future.     

相移阴影莫尔基于迭代LSM拟合

相移阴影莫尔技术相位高度存在着非线性关系,无法在全场获得均匀相移,因而致使经典的相移算法不能得到精确解.对此,提出了一种基于最小方差迭代的相移阴影莫尔技术,该技术通过垂直光栅面等间距移动光栅来产生相移,但光栅移动距离可不采用固定值,所以相移过程灵活|使用在高度解调过程中确定的逐点相移增量来抽取精确的测量相位,实现了相移阴影莫尔技术中固有的相位高度非线性误差补偿.结果表明,该方法可通过干涉图计算光栅的移动量,具有相移器的自标定特性.