Novel miniature high power ring filter

The power handling capability of high temperature superconducting (HTS) filters is limited due to current concentration at the edges of the superconducting films. This problem can be overcome by using ring resonator, which employs the edge current free and reduces the current concentration. However, this kind of filter has large size. In order to reduce the cost and size and increase the power handling capability, in this paper a HTS photonic bandgap (PBG) structure filter is developed. The proposed pass band filter with PBG structure exhibits center frequency 12.23 GHz, steepness (about 35 dB/GHz), bandwidth (−3 dB bandwidth is 0.045 GHz), and low insertion loss (about −0.5 dB), and can handle input power up to 1 W (this value was limited by the measurement instrument used in the experiment). The size is reduced by 25%, insertion loss reduced by 37.5%, and steeper roll-off of the filter is also obtained compared with that in published literature.     

TM掺杂Ⅱ-Ⅳ-Ⅴ2黄铜矿半导体的电磁性质

利用自旋局域密度泛函的第一性原理对3d过渡金属(TM=V，Cr，Mn，Fe，Co和Ni)掺杂的Ⅱ-Ⅳ-Ⅴ2(CdGeP2和ZnGeP2)黄铜矿半导体的电磁性质进行系统计算，结果发现：V和Cr掺杂的CdGeP2和ZnGeP2将出现铁磁状态(FM)，Mn，Fe以及Co掺杂的CdGeB和ZnGeP2将出现反铁磁状态(AFM)，而Ni掺杂时，稀磁半导体(DMS)的磁性比较不稳定，其中Cr掺杂的CdGeP2和ZnGeP2将可能是具有较高居里温度Tc的DMS，当TM-3d电子的t2g态部分被填充时，其掺杂的DMS将出现FM状态；而当TM-3d电子的t2g态全满或者全空时，其掺杂的DMS将出现AFM状态，在(Cd，Mn)GeP，和(Zn，Mn)(GeP2中分别掺入电子和空穴载流子，可以发现载流子是否具有TM-3d电子的巡游特性是。DMS是否出现FM状态的主要原因。     

Inter- and intra-subband relaxation of hot electrons in GaAs/AlGaAs quantum wells

In this work, we have studied the inter- and intra-subband scattering of hot electrons in quantum wells using the hot electron-neutral acceptor luminescence technique. We have observed direct evidence of the emission of confined optical phonons by hot electrons excited slightly above the n=2 subband in GaAs/Al_0.37Ga_0.63As quantum wells. Scattering rates of photoexcited electrons via inter- and intra-subband LO phonon emission were calculated based on the dielectric continuum model. We found that, for wide wells with the Al composition of our experiments, both the calculated and experimental results suggest that the scattering of the electrons is dominated by the confined LO phonon mode. In the calculations, scatterings among higher subbands are also dominated by the same type of phonon at well width of 10 nm.     

飞秒啁啾脉冲放大系统中折叠反射式望远镜对脉冲波前的影响

推导出飞秒激光啁啾脉冲放大系统中使用的折叠反射式望远镜对脉冲波前的影响. 分析和计 算了波前倾斜与反射式望远镜参数之间的关系.结果发现：当脉冲宽度小于100 fs时，波前 倾斜对光束质量的影响不可忽略，并提出了抑制这种脉冲波前倾斜的有效方法. 关键词： 飞秒激光啁啾脉冲放大 波前倾斜 反射式望远镜     

Ultrafast motion of liquids C2H4Cl2 and C2H4Br2 studied with a femtosecond laser

Transient optical Kerr effect of liquids C₂H₄Cl₂ and C₂H₄Br₂ is investigated, for the first time to our knowledge, with a femtosecond (fs) probe laser delayed with respect to a coherent fs pump laser. Coherent coupling and electronic Kerr signals are observed around zero delay when pump and probe overlap. Persisting after the pump-probe overlap are Kerr signals arising from the torsional and other intramolecular vibrations of the trans and gauche conformations; Kerr signals arising from the intermolecular motion are also observed. Vibrational quantum interference is only observed in liquid C₂H₄Br₂ and the related beats data are fitted with the torsional vibrations, 91 cm⁻¹ (gauche) and 132 cm⁻¹ (trans), and the CCBr angle-bending vibrations, 231 cm⁻¹ (gauche) and 190 cm⁻¹ (trans), with dephasing times, 0.45 ps, 0.45 ps, 2 ps, and 1.5 ps, respectively. These vibrational frequencies agree with those obtained in the frequency-domain. That no vibrational mode is observed for C₂H₄Cl₂ might be attributed to ineffective Raman-pumping. Kerr signals observed after the pump-probe overlap are Fourier transformed to give the spectra of the intermolecular motion and the vibrational spectrum, which agrees with the one observed in the infrared absorption and/or Raman scattering heretofore.     

Comparative analysis of the effects of internal lasing oscillation and external light injection on semiconductor optical amplifier performance

One of the key differences of a semiconductor optical amplifier (SOA) with internal lasing oscillation (ILO) from a SOA with external light injection (ELI) lies in a carrier-sharing mechanism. Since the internal lasing mode shares the same pool of carriers with the signals, the carriers (or photons) withdrawn from the circulating laser mode speed up the gain recovery. On the other hand, the external light injected into the SOA shortens the carrier recovery time through optical pumping without any carrier sharing involved. To find out a better scheme, we have made a comparative investigation on the effects of the ILO and ELI on the SOA performance. It turns out by way of simulation that the ELI scheme provides faster gain recovery, shorter carrier lifetime, and higher saturation power when the external injection power is higher than the internal lasing power. The performance enhancement is not so pronounced with the carrier-sharing mechanism, as the internal lasing mode itself gives rise to severe longitudinal spatial hole burning (LSHB). Nevertheless, the ILO scheme is preferable for linear-amplification applications. We also examine the use of the ELI for low-crosstalk optical amplifiers. It is found that the ELI scheme does not bring in a very strong resonance peak in the crosstalk, which appears in a SOA with ILO due to relaxation oscillations of the lasing mode. In comparison to the ILO in SOAs, the ELI into SOAs is likely to leave more optical gain for multi-channel amplification without any sacrifice on the crosstalk.     

Structural and magnetic properties of Cr1+x(Se1−yTey)2 compounds

The structural and magnetic properties of Cr_1+x(Se_1−yTe_y)₂ having a NiAs structure has been studied for (1+x)=1.27, 1.32 and 1.36 and y=0.75 by means of the Korringa-Kohn-Rostoker (KKR) band structure method. The sub-stoichiometry and the disorder on the chalcogenide sub-lattice has been treated by means of the coherent potential approximation (CPA) alloy theory. From total energy calculations a preferential site occupation on the Cr sub-lattice was found together with an antiparallel alignment of the magnetic moments on the two inequivalent Cr layers. The magnetic properties at finite temperature has been studied by means of Monte Carlo simulations on the basis of a classical Heisenberg Hamiltonian and the exchange coupling parameters calculated from first principles. This approach allowed to determine the critical temperature in good agreement with experiment.     

Temperature-insensitive fiber Bragg grating dynamic pressure sensing system

Temperature-insensitive dynamic pressure measurement using a single fiber Bragg grating (FBG) based on reflection spectrum bandwidth modulation and optical power detection is proposed. A specifically designed double-hole cantilever beam is used to provide a pressure-induced axial strain gradient along the sensing FBG and is also used to modulate the reflection bandwidth of the grating. The bandwidth modulation is immune to spatially uniform temperature effects, and the pressure can be unambiguously determined by measuring the reflected optical power, avoiding the complex wavelength interrogation system. The system acquisition time is up to 85 Hz for dynamic pressure measurement, and the thermal fluctuation is kept less than 1.2% full-scale for a temperature range of -10 degrees C to 80 degrees C.     

The evolution of the cavitation bubble driven by different sound pressure

In this paper, the relation between the ambient radius R(0) of the acoustic cavitation bubble and its driving pressure was investigated by an improved method. The evolution of the bubble was gained with a long-distance microscope and a bundle of 532 nm laser switched by an acousto-optic modulator. The ambient radius R(0) was determined by fitting the numerical calculation based on Rayleigh-Plesset equation to the experimental data. The results showed that as the sound pressure increased R(0) decreased at beginning and increased after the pressure reached to about 1.2 atm. Although the same rule was gotten from the relation between the maximum radius R(m) and the sound pressure, the ratio R(m)/R(0) varied monotonously with the sound pressure. It indicates that enhancing the sound pressure can increase the compression ratio of the bubble even if the mass inside the bubble is also increased.     

Tomography of injection and acceleration of monoenergetic electrons in a laser-wakefield accelerator

A tomographic diagnosis method was developed to systematically resolve the injection and acceleration processes of a monoenergetic electron beam in a laser-wakefield accelerator. It was found that all the monoenergetic electrons are injected at the same location in the plasma column and accelerated from 5 to 55 MeV energy in 200 microm distance. This is a direct measurement of the real acceleration gradient in a laser-wakefield accelerator, and the experimental data are consistent with the model of transverse wave breaking and beam loading for monoenergetic electron injection.