氧化光栅型垂直腔面发射激光器的研究

通过分析矩形出光孔径和亚波长金属光栅结构,发现大孔径高功率垂直腔面发射激光器(VCSEL)的偏振控制的难点在于横模非常复杂。因此提出一种新型的氧化光栅型VCSEL结构,不仅能够很好地在有源区内引入各项异性的增益结构,并且最大的优势还在于能够完美地控制大孔径VCSEL的横模。通过有限元软件对器件有源区的电流分布进行了模拟,发现当光栅脊的宽度为1.8 μm时,载流子在光栅两端聚集的现象基本上可以消除,而且其电流密度分布差可以达到很高。     

Compositional Dependence of Static Shear Viscosity of Immiscible PP/PS Blends

Phase structures of immiscible polypropylene (PP)/polystyrene (PS) blends with different volume proportions, PP90/PS10, PP80/PS20, PP70/PS30, PP60/PS40, PP50/PS50, PP40/PS60, PP30/PS70, PP20/PS80, PP10/PS90, were observed by means of scanning electronic microscopy (SEM). The zero shear viscosities of the blends were determined according to a modified Carreau model by fitting the curves of static shear rate sweeps of blends tested at 190°C in a Stress Tech Fluids Rheometer. The results showed that the compositional dependence of zero shear viscosity of PP/PS deviated greatly from linear or log‐linear additivity. When PS was dispersed in a PP continuous phase, the blends showed negative deviation, while for blends with PP dispersed in a PS matrix, positive deviation was generated. When different theoretical equations of Nielsen, Utracki, Taylor, Frankel‐Acrivos (FA), Choi‐Schowalter (CS), and Han‐King (HK) were used to fit the experimental data of zero shear viscosities of blends, none of them was suitable for PP/PS blends. These experimental phenomena may result from the complex phase structures of the blends and their response to shear conditions, which are discussed in detail and compared with the experimental analysis.     

The Nucleation Effect of Grafted Carbon Black on Crystallization of Poly(Ethylene Terephthalate)/Grafted Carbon Black Composite

Poly(ethylene terephthalate)/grafted carbon black (PET/GCB) and poly(ethylene terephthalate)/carbon black (PET/CB) composites were prepared by melt blending. The nucleating effect of CB and GCB were investigated using differential scanning calorimetry (DSC) analysis. The morphologies of the spherulites in PET, PET/CB and PET/GCB composites were observed by means of scanning electron microscopy (SEM). All results showed that GCB had higher nucleating activity than CB in PET and PET/GCB composite had higher rate of nucleation and crystallization. The melting behaviors of neat PET, PET/CB and PET/GCB composites after non‐isothermal crystallization were investigated as well. It was evident that the melting behavior of PET is greatly influenced by addition of CB and GCB.     

Morphology Development in Multi‐Component Polymer Blends: I Composition Effect on Phase Morphology in PP/PET Polymer Blends

The relationship of the phase morphology of polypropylene/polyethylene‐terephthalate (PP/PET) blends and their corresponding compatibilized blends with composition was investigated using digital image analysis. A diameter, d _g , was defined and calculated to discuss the phase morphology of this polymer blend system. A figure‐estimation method was introduced to determine the width of the distribution of d _g . Based on the method, it is proven that the distribution of d _g obeys a log‐normal distribution and consequently, the distribution width, σ was calculated. Further, a fractal dimension, D _f , was introduced to describe the distribution of main sizes of the particles of the dispersed phase. The results showed that, while d _g increased with the concentration of the dispersed phase, σ and D _f show different dependence relations on composition;σ increases monotonously but D _f shows a maximum at a PET content of 30%, indicating that, even though the whole size distribution is much broader, the distribution of the main body of size becomes more uniform when the content of PET is less than 30%.     

Thermal and Thermo-Oxidative Degradation of Biodegradable Poly(Ester Urethane) Containing Poly(L-Lactic Acid) and Poly(Butylene Succinate) Blocks

A novel biodegradable poly(ester urethane; PEU) was synthesized by chain extension reaction of dihydroxylated poly(L-lactic acid; PLLA) and poly(butylene succinate; PBS) using diisocyanate as a chain extender. The kinetics of thermal and thermo-oxidative degradation of PEU containing PLLA and PBS blocks were studied by thermogravimetric analysis (TGA). TGA results indicated that PEU was more stable in air than in nitrogen and went through a two-stage degradation process irrespective of the experimental atmosphere. Activation energy of each stage was calculated by means of Kissinger, Kim-Park, Friedman, Flynn-Wall-Ozawa, and Kissinger-Akahira-Sunose methods. For the first stage, the activation energy value obtained in air was slightly higher than the corresponding value obtained in nitrogen; and for the second stage, the activation energy showed a much higher value in air than in nitrogen. The Coats-Redfern method was employed to study the degradation mechanism of each stage. The results indicated that the degradation of the first stage follows the P3/4 mechanism irrespective of the experimental atmosphere; the degradation of the second stage of PEU obeys the P1 mechanism in nitrogen while P3/2 in air.     

Precursor Based on Polyborylborazine for BN Fiber: Preparation and Rheology Properties

A polyborylborazine precursor for hexagonal boron nitride (h-BN) was obtained by reaction of boron trichloride with methylamine and its structure was characterized by ¹¹BNMR, ¹³CNMR, ¹HNMR, and FTIR. The results show that the molecular precursor consists of borazine rings connected via a cross-linked network. The results of shear rheological tests indicated that the polymer is capable of being melt spun at moderate temperature, which implies that the structure of the molecular chains of the precursor polymer is branched. The precursor polymer was spun into a continuous polymer fiber in the melt state and then subsequently heat-treated under NH₃ up to 1000°C for conversion into BN fibers. Its surface morphology was observed by scanning electron microscopy (SEM); the fiber was free of defects and cavities.     

Self-Reinforced High-Density Polyethylene Prepared by Low Frequency Vibration-Assisted Injection Molding. II: Microstructure Investigation

Scanning electron microscopy (SEM), differential scanning calorimetry (DSC), and wide angle X-ray diffraction (WAXD) were employed to study the microstructure of self-reinforced high-density polyethylene (HDPE) prepared by conventional injection molding (CIM) and a low frequency vibration-assisted injection molding (VAIM). SEM micrographs following permanganic etching showed the self-reinforcement of HDPE is mainly due to the existence of shish-kebab morphology within the core region for VAIM-processed HDPE samples. Pronounced molecular alignment was identified by the WAXD data. An approximate 9% increase in the crystallinity was confirmed by DSC. Both preferred molecular orientation and increased crystallinity serve to yield stronger VAIM-processed injection moldings.     

Preparation and Surface Properties of Fluorinated Acrylates Copolymers

Copolymerization of acrylates and styrene (St) with perfluorooctylacyloxyethyl methacrylate (FA) monomer, prepared from the reaction of perfluorooctanoic acid and hydroxymethyl methacrylate, was carried out by solution polymerization. The fluorinated acrylate and St copolymers (PFA) were examined by GPC, FT-IR, and ¹H NMR. The surface tension of the PFA solution in N-methyl pyrrolidone was tested by the drop volume method. The results showed that the surface tension of the PFA solution decreased in exponential decay with increase of the PFA concentration, and the surface tension of the solution also decreased with increased addition of the FA monomer in the copolymer at the same concentration. Meanwhile, the adsorption of the PFA macromolecules in the air–solution interface increased and enrichment of the fluorinated segments on the solution surface occurred. The studies of the surface free energy, polarity, fluorine content, and morphology of the PFA films illustrated that the surface free energy and polarity of the PFA films were decreased with the augment of the FA monomer in the copolymers, and that the fluorine content and the surface roughness were increased. The surface free energy of the PFA film was as small as 16.6 mN·m^?1. The surface properties of the PFA copolymers obtained by one shot feed during polymerization were superior to those obtained by continuing feed procedure. More fluorine segregation occurred and induced the formation of a fluorine-enriched surface if the PFA copolymer was postheated. The posttreatment was thus beneficial to the improvement of the surface properties of the PFA film.