Photoluminescence study in step-graded composition InxAl1−xAs/GaAs

We report on the lattice-mismatched growth of step-graded In_xAl_1−xAs buffer layers on GaAs (0 0 1) substrates by molecular beam epitay (MBE). The approach to growing highly lattice-mismatched epilayers is to interpose a buffer layer between the substrate and the active layer. Two samples G30 and G40 with active layer compositions, respectively, x = 0.46 and x = 0.41, are studied by photoluminescence (PL). At low temperature, the PL spectra show a large broadened band whose energy and intensity depend on the active layer composition. The step-graded layer compositions improved the crystalline quality of these structures and increase the active layer PL band intensity.     

The magnetic properties of Be-codoped GaMnN grown via molecular beam epitaxy

GaMnN and Be-codoped GaMnN were grown via molecular beam epitaxy using a single GaN precursor and their structural and magnetic properties were examined. X-ray diffraction and superconducting quantum interference device (SQUID) measurements revealed that the grown layers are homogeneous without precipitates. The saturation magnetization of GaMnN has increased from ∼4 to ∼16 emu/cm³ via codoping of Be. The d–d exchange interaction between Mn atoms was discussed for the ferromagnetism of GaMnN.     

Towards a fully optimised organic LED device: Analysis of surface synthesis using coupling reactions by ToF-SIMS

Time-of-flight secondary ion mass spectrometry (ToF-SIMS) and polarisation-modulation reflection-absorption infrared spectroscopy (PM-RAIRS) have been used to monitor the surface synthesis of self-assembled aromatic π-conjugated molecular wires on gold substrates as a step towards a novel structure for organic electroluminescent devices (OLEDs). The wires have been synthesised using a series of Schiff's base coupling reactions in solution on a self-assembled monolayer of an aromatic thiolate anchor. ToF-SIMS and PM-RAIRS measurements have demonstrated that: (i) the anchor molecules self-assemble at the gold surface, (ii) the anchor molecules selectively react through imino coupling reactions with additional wire units with high efficiency and (iii) the wire-like structure is predominantly orientated normal to the surface.     

Dynamics of a polymer chain in an array of obstacles

On the basis of the model “polymer chain in an array of obstacles” the influence of the topology effects on the dynamics of concentrated polymer systems is investigated theoretically. The 1/z-expansion (where z is the coordinational number of the lattice of obstacles) is proposed for this problem. By means of this expansion the diffusion coefficient of a linear unclosed polymer chain is calculated. The equilibrium properties of linear closed chain (i.e. ring) unentangled with either of the edges of the lattice are investigated in detail. In particular, it is shown that the diffusion coefficient D of the center of mass of closed chain consisting of N links is proportional to N^−5/2.     

High performance a-Si solar cells and new fabrication methods for a-Si solar cells

The super chamber, a separated UHV reaction-chamber system has been developed. A conversion efficiency of 11.7% was obtained for an a-Si solar cell using a high-quality i-layer deposited by the super chamber, and a p-layer fabricated by a photo-CVD method.As a new material, amorphous superlattice-structure films were fabricated by the photo-CVD method for the first time. Superlattice structure p-layer a-Si solar cells were fabricated, and a conversion efficiency of 10.5% was obtained.For the fabrication of integrated type a-Si solar cell modules, a laser pattering method was investigated. A thermal analysis of the multilayer structure was done. It was confirmed that selective scribing for a-Si, TCO and metal film is possible by controlling the laser power density. Recently developed a-Si solar power generation systems and a-Si solar cell roofing tiles are also described.     

Effect of γ-ray irradiation on the magnetic properties of NdFeB and Fe–Cr–Co permanent magnets

The effect of γ-ray irradiation on the magnetic properties of NdFeB and Fe–Cr–Co permanent magnets has been investigated. The magnetic flux loss of two kinds of magnets before and after irradiation was measured. Results show that the effect of γ-ray irradiation on the magnetic properties of sintered NdFeB is not so obvious as that on Fe–Cr–Co magnet. Irradiation-induced damage from γ-ray for the Fe–Cr–Co magnets was characterized for the first time. The decline of permanent magnetic properties of Fe–Cr–Co magnet induced by γ-ray irradiation is reversible except for the maximum energy product (BH)_max. The difference of coercivity mechanism between these two kinds of permanent magnets is responsible for the different dependence of magnetic properties loss induced by γ-ray irradiation.     

Hierarchy of rational order families of chaotic maps with an invariant measure

We introduce an interesting hierarchy of rational order chaotic maps that possess an invariant measure. In contrast to the previously introduced hierarchy of chaotic maps [1–5], with merely entropy production, the rational order chaotic maps can simultaneously produce and consume entropy. We compute the Kolmogorov-Sinai entropy of these maps analytically and also their Lyapunov exponent numerically, where the obtained numerical results support the analytical calculations.     

Pressure pulse from a laser pulse acting on a composite

Conclusions These tests on quasistationary irradiated for polyethylene-matrix powder-filled composites show that the filler composition and content have marked effects on the damage.There are ranges where the specific loss, the pressure, and the integral recoil pulse decrease as the power density increases because of changes in the damage mechanism, which are most prominent for zirconium oxide as filler. Bulk absorption contributes considerably, and causes various types of defect. Estimates have been made of the pressures arising in explosive matrix decomposition in the bulk together with the specific damage energies.These measurements are useful in modeling laser effects on composites.Translated from Mekhanika Kompositnykh Materialov, No. 5, pp. 868–872, September–October, 1988.     

Investigation of MFTIR infrared spectra of peat waxes with sorbed cationic surfactants

Journal of Applied Spectroscopy -