Simultaneous measurement of curvature and temperature based on PCF-based interferometer and fiber Bragg grating

A sensor head consisting of a photonic crystal fiber (PCF)-based Mach-Zehnder interferometer (MZI) and a fiber Bragg grating (FBG) is proposed and experimentally demonstrated for simultaneous measurement of curvature and temperature. The MZI fabricated by splicing a short length of PCF between two single-mode fibers with the air-hole structure that completely collapsed near the splicing points, is sensitive to fiber bending and surrounding temperature, while the FBG is only sensitive to the later. Simultaneous measurement of curvature and temperature is therefore obtained. Sensitivities of 4.06 nm/m^− 1 and 6.30 pm/°C are achieved experimentally for curvature and temperature, respectively. And the corresponding resolutions are 5.2 × 10^− 4 m^− 1 and 1.25 °C for curvature and temperature, respectively, based on the wavelength measurement resolution of 10 pm.     

Photoluminescence characteristics of ZnTiO3: Bi nanocrystals

The photoluminescence properties of the Bi³⁺ in sol-gel derived ZnTiO₃ nanocrystals have been investigated. An ultra-violet emission at 360 nm and a visible emission band at 506 nm have been observed, originating from two kinds of emission centers. The former is ascribed to the ³P₁-¹S₀ transition of Bi³⁺ and the latter to the recombination of the electrons with the photo-generated holes trapped in the zinc vacancies. In all cases the latter contribution is predominant.     

THE EFFECT OF THE FREEZE-OUT VOLUME IN THE MULTIFRAGMENTATION OF VERY HOT NUCLEAR REMNANT

In this paper a simplified method for the calculation of average Coulomb energy in statistical model of the disassembly processes of hot nuclei is proposed.The effect of freeze-out volume is studied based on the assumption of Gaussion-like distribution.It is indecated that the centre and dispersion of Gaussion-like distribution somewhat reflect the location and the renge of liquid-gas coexistence phase.     

Numerical simulation of two-dimensional granular shearing flows and the friction force of a moving slab on the granular media

This paper studies some interesting features of two-dimensional granular shearing flow by using molecular dynamic approach for a specific granular system.The obtained results show that the probability distribution function of velocities of particles is Gaussian at the central part,but diverts from Gaussian distribution nearby the wall.The macroscopic stress along the vertical direction has large fluctuation around a constant value,the non-zero average velocity occurs mainly near the moving wall,which forms a shearing zone.In the shearing movement,the volume of the granular material behaves in a random manner.The equivalent friction coefficient between moving slab and granular material correlates with the moving speed at low velocity,and approaches constant as the velocity is large enough.     

应用级联倍频方法提高倍频系统输出稳定性研究

提出应用级联倍频方法提高倍频系统输出稳定性,并就该方法的有效性进行了理论分析和模拟计算.分析和计算结果不但证明级联倍频方法能实现倍频系统稳定输出,而且还表明可以通过仔细调节第一块倍频晶体中波矢方向 k 与光轴间夹角、两块倍频晶体间的间隔,能调节改变实现倍频系统最稳输出时所需第二块晶体的理论计算长度,使之与第二块倍频晶体的实际加工长度一致,最终实现系统稳定倍频输出.级联倍频方法在实现高输出稳定性的同时能实现高的倍频转换效率,对应用于光参量啁啾脉冲放大系统的高稳定抽运源系统的设计建造具有重要参考意义. 关键词： 级联倍频 稳定倍频输出 光参量啁啾脉冲放大     

Electric field-induced stress birefringence in layered composites PbZr1-xTixO3/Polycarbonate

Electro-optical composites based on the product of electro-strictive and elasto-optical effects are developed.Layered composites of PbZr 1 x Ti x O 3 and polycarbonate are synthesised.Their electro-optical properties are studied.The nominal transverse electro-optical coefficient of the composite is observed to be about 3.6 times larger than that of LiNbO 3.Experiments and theoretical analyses show that the electro-optical effect of the composite has a strong ’size effect’.With the ratio of thickness/length decreasing or the width of elasto-optical phase increasing,the half-wave electric field intensity increases but the transverse electro-optical coefficient decreases for the layered composite.     

全谱拟合法研究聚丙烯腈基碳纤维形成过程中晶态结构演变

通过全谱拟合法对碳纤维制备过程中不同阶段纤维的XRD谱图进行处理,得到不同阶段纤维的微观结构参数,研究了聚丙烯腈(PAN)基碳纤维制备过程中晶态结构的演变.全谱拟合法基于晶体衍射的严格物理理论,拟合目标为整个衍射谱,并不是个别衍射峰,所得结果具有更高的可信度.研究结果表明:PAN原丝中的高分子链沿纤维轴高度取向,表观晶粒尺寸为6.5 nm左右;经过预氧化处理,纤维中的有序结构遭到破坏,表观晶粒尺寸锐减.纤维中逐渐形成梯形结构并沿纤维轴取向,从而形成新的有序结构;经过碳化处理后,环状梯形结构转变为碳的层状结 关键词： 碳纤维 晶体结构 XRD 全谱拟合法     

氧分压对Mg掺杂ZnO薄膜结晶质量和光学特性的影响

利用脉冲激光沉积技术,通过改变沉积过程中的氧气压力,在蓝宝石(0001)基片上制备了一系列ZnMgO合金.通过X射线衍射、反射和透射光谱以及室温和变温荧光光谱,对薄膜的结构和光学性能进行了系统地表征,分析了工作气压对ZnMgO合金薄膜的结晶质量及光学特性的影响.研究结果表明:随着沉积环境中氧气压力的增大,ZnMgO薄膜的结晶质量下降,富氧环境下,与蓝宝石晶格平行的ZnO晶粒的出现是导致薄膜结晶质量下降的主要原因;相对于本征ZnO,不同氧气环境下沉积的ZnMgO薄膜的紫外荧光峰均出现了不同程度的蓝移.随着工 关键词： ZnO Mg掺杂 脉冲激光沉积 薄膜生长 光学特性     

超短脉冲强激光与固体靶作用产生的高次谐波红移

用一维粒子模拟程序研究了超短脉冲强激光与超临界密度等离子体平板作用产生的高次谐波。分析了振荡镜面模型所不能解释的伴随高次谐波出现的频率红移现象。通常激光与固体靶作用中的高次谐波是由于激光从振荡靶面的反射产生的.除此之外，相对论光强的激光与固体靶作用还应考虑光压对靶的烧蚀推进作用，这时激光相当于从一个移动的振荡靶面反射，所以产生了带有红移的高次谐波. 关键词： 红移 超短脉冲强激光 高次谐波 粒子模拟     

U：CaF2晶体的分凝特性与光谱性质

应用TGT法生长了直径为75mm的U：CaF2晶体，宏观上透明完整.应用公式K0=Cs/Cl计算了U在CaF2晶体中的分凝系数等于0.53.应用溶质分布一般公式Cs=K0C0(1-g)K0-1，计算U的浓度分布与测量值，数值符合说明晶体生长过程接近平衡状态.分析不同条件下生长的U: CaF2晶体的晶胞参数和吸收光谱，结果表明生长气氛决定U的价态及电荷补偿机理：无PbF2存在的条件下，U为+4价，晶体呈绿色；PbF2的加入起到氟化去氧作用，U倾向于以离子半径最接近于Ca2+的U3+存在，晶体呈红色.从晶体生长开始到结束的部位，U3+:CaF2晶体吸收光谱的峰位不变，峰强呈现与U浓度相同的增加趋势.U3+:CaF2晶体外层厚约5mm处呈黄色，含有U3+和U2+的混合价态离子，其原理是石墨坩埚的还原作用通过单质铅，使部分的U3+进一步还原成了U2+. 关键词： 铀 氟化钙晶体 分凝系数 晶胞参数