Crystallization and conductivity of 2CaO–La2O3–5P2O5 glass–ceramic with Al2O3 addition

Al₂O₃ was added to a 2CaO–La₂O₃–5P₂O₅ metaphosphate, to replace 10% of the Ca²⁺ ions by Al³⁺, forming a phosphate with the nominal composition 1.8CaO–0.1Al₂O₃–La₂O₃–5P₂O₅. The effect of Al₂O₃ addition and heat treatment on the microstructure and conductivity of the resulting glass–ceramics was investigated by XRD, SEM, TEM, and AC impedance spectroscopy. Upon transformation from glass to glass–ceramic, conductivities increased significantly. The glasses were isochronally transformed at 700 and at 800 °C for 1 h or 5 h, in air, following heating at 3 or 10 °C/min. With Al₂O₃ addition, after a heat treatment at 700 °C, 100–300 nm nano-domains of LaP₃O₉ crystallized from the glass matrix. Annealing at 800 °C produced a further order of magnitude conductivity increase for the Al-free glass, but less so for the Al-containing glass.     

具有时间分辨能力的强流电子束束剖面测量系统

 高能强流电子束的束参数测量是加速器研制过程中重要的一项测量工作,由于光学渡越辐射具有时间响应快、分辨率高等特点而被用于测量电子束的具有时间分辨能力的束剖面、发散角、能量等多个参数;通过电子束束参数的时间分辨测量则能够了解电子束产生、输运中的问题,非常有利于加速器的研究与调试。一种具有时间分辨能力的、利用光学渡越辐射进行高能强流电子束束斑测量的系统在中国工程物理研究院被建立起来,并在12 MeV LIA的电子束束斑的测量中用于电子束传输研究,该系统拍摄图像的间隔时间最小为10 ns,最小的曝光时间为3 ns,具有一次可以拍摄8幅图像的能力,并获得了12 MeV LIA约100 ns内相应的时间分辨的束斑变化情况,观察到了一些过去未观察到的现象,为加速器的研究提供了又一个新测试方法。     

Analysis of Ωb? (bss) and Ωc0 (css) with QCD sum rules

We calculate the masses and the pole residues of the heavy baryons Ω _c ⁰(css) and Ω _b ⁻(bss) with the QCD sum rules. The numerical values  GeV (or  GeV) and  GeV (or  GeV) are in good agreement with the experimental data.     

利用单幅同轴菲涅耳数字全息图重构物光波面

在数字全息研究中,为了充分利用CCD器件有限的卒间带宽积,常采用同轴全息记录.然而用同轴全息图再现时,再现物光波和共轭物光波是混在一起无法分开的.有效消除同轴全息图再现光波场中的共轭像是数字全息应用中的一项关键技术.基于菲涅耳衍射运算和逆运算,提出一种用同轴数字全息图重构物光波面的迭代算法.该方法利用同轴全息图再现时,再现物光波和共轭物光波衍射特性的不同来剔除共轭物光波成分,从而将再现物光波成分有效分离出,实现单幅同轴全息图的物光波面数值重构.计算机模拟实验证明了该方法简单易行.     

Preparation of phosphors AEu(MoO4)2 (A?=?Li, Na, K and Ag) by?sol-gel method

A series of double molybdates phosphors AEu(MoO₄)₂ (A = Li, Na, K and Ag) have been prepared by sol-gel method. Their crystal structure and luminescent properties have also been investigated in a comparable way. The crystallization processes of the phosphor precursors were characterized by X-ray diffraction (XRD) and thermogravimetry-differential thermal analysis (TG-DTA). Field emission scanning electron microscopy (FE-SEM) was also used to characterize the shape and size distribution of the phosphors. Samples except KEu(MoO₄)₂ showed tetragonal scheelite structure in the range of our experiments, and no phase transition appeared. Phosphor KEu(MoO₄)₂ possessed two structures, and the phase transition took place at about 800°C. All samples with high purity could be obtained at about 500°C for 5 hours, and they all showed intense red light peaked at 616 nm originated from ⁵D₀→⁷F₂ emission of Eu³⁺ under the excitation of 465 nm or 394 nm light. The excitation spectra of phosphors AEu(MoO₄)₂ (A = Li, Na, and K) are composed of a strong broad charge transfer (CT) band and some sharp lines, and the relative intensity of CT band, the two strongest absorption lines at 395 nm and 465 nm are comparative, so these three phosphors are good red phosphor candidates for violet or blue LEDs. For the excitation spectrum of phosphor AgEu(MoO₄)₂, intensities of CT band and the absorption line at 395 nm are much weaker than that of line at 465 nm, thus phosphor AgEu(MoO₄)₂ is only suit for GaN-based blue LED.     

Improvement of the relative entropy based protein folding method

The “relative entropy” has been used as a minimization function to predict the tertiary structure of a protein backbone, and good results have been obtained. However, in our previous work, the ensemble average of the contact potential was estimated by an approximate calculation. In order to improve the theoretical integrity of the relative-entropy-based method, a new theoretical calculation method of the ensemble average of the contact potential was presented in this work, which is based on the thermodynamic perturbation theory. Tests of the improved algorithm were performed on twelve small proteins. The root mean square deviations of the predicted versus the native structures from Protein Data Bank range from 0.40 to 0.60 nm. Compared with the previous approximate values, the average prediction accuracy is improved by 0.04 nm. Contributed equally to this work Supported by the National Natural Science Foundation of China (Grant No. 30670497), the Beijing Natural Science Foundation (Grant No. 5072002), and the Specialized Research Foundation for the Doctoral Program of Higher Education (Grant No. 200800050003)     

液氮温区下应变式位移传感系统测量性能的研究

文中研究了一种应变式位移传感系统在室温和液氮温度下的静态传输特性。实验结果表明,该系统在液氮温区下具有良好的输出特性,系统非线性度低于1%,滞环率低于5%,其灵敏系数与温度相关,293K和77K温度下的灵敏系数分别为-0.3654mV/V/mm和-0.3886mV/V/mm。实验结果为该位移传感系统在低温环境中的应用提供了一定基础。     

The transportable cesium fountain clock NIM5: its construction and performance

The second laser cooling cesium fountain clock NIM5 at the National Institute of Metrology (NIM) China adopts the (1,1,1) direct optical molasses ( OM) configuration. NIM5 has been running with a stability of 3×10⁻¹⁵/d and an operation ratio of 99% since 2007. Preliminary evaluations of NIM5 in 2008 showed a typical combined uncertainty of 3×10⁻¹⁵. The NIM5 clock is operating in parallel with NIM’s first fountain clock NIM4. NIM4 and NIM5 are used to steer the frequency of the calculated NIM atomic time TA-c(NIM) and the first set of results are promising. We are now at the stage of comparing the frequency of NIM5 with UTC to support the independent frequency shift evaluations of NIM5 and contribute to the international atomic time in the near future.      

Experimental progress in optical manipulation of single atoms for cavity QED

Cavity QED, as a fundamental system and research field, not only illuminates the primary aspects of decoherence and coherence in quantum dynamics, but also advances quantum information science. Manipulation of single atoms, in the context of cavity QED, is the essential element and has been becoming a hot issue for the past two decades. In this review paper, we will concentrate on the experimental aspects for manipulating the neutral atoms strongly coupled to a high-finesse cavity in the optical regime, including atomic cooling and trapping, different configurations of atom transportation and the wide variety of quantum outgrowths based on cavity QED, such as one atom laser, single photon source, etc. The cavity QED system at Shanxi University is briefly introduced.      

Sixth harmonic generation of 1064-nm laser in KBBF prism coupling devices under two kinds of gas conditions

The conversion efficiency on the sixth harmonic of 1064 nm in KBe2BO3F2 （KBBF） at different gas pressures in two kinds of gases, helium and nitrogen, is measured and compared. In the both gases, maximum conversion efficiency on the sixth harmonic of 1064 nm in high vacuum is nearly 10% of 355 nm, which is almost four times higher than that in low vacuum. The maximum average output power at 177.3 nm is 670 ttW with the repetition rate of 10 Hz and the duration of 20 ps in high vacuum. It indicates that the sixth harmonic generation in high vacuum is more preferable than that in low vacuum.