超声速气流下强激光辐照靶体失效数值模拟

建立了能够反映激光、流场和结构相互作用的热流固耦合数值计算方法,用于模拟超声速气流（马赫数1.2~4.0）作用下强激光辐照靶体结构的失效行为。分析了不同耦合策略对数值计算结果的影响。研究了激光功率密度及来流马赫数对屈服失效和熔融失效行为的影响。结果表明:激光功率密度对失效辐照时间影响显著;存在一个临界马赫数,使得达到屈服失效和熔融失效的辐照时间最长。通过定量分析激光辐照下不同马赫数的气动生热、散热及能量分配,解释了临界马赫数存在的机理。     

Propagation of a pair of vortices through a tilted lens

The propagation of a pair of vortices nested in a Gaussian beam through a tilted lens is studied. It is shown that after passing through the tilted lens, the relation between the transverse position of vortices and the tilt coefficient is linear in the propagation for isopolar vortex pair and vortex dipole, and in the three-dimensional (3D) case the vortex trajectories are sometimes like U or X shapes. With increasing the orientation angle of the vortex pair, the trajectories of vortices are circles for the both cases. The overlap of vortices may take place for the isopolar vortex pair, while the annihilation and revival of vortices occur for the vortex dipole in the propagation.     

Mixed multi-region design of diffractive optical element for projection exposure system

The diffractive optical element (DOE) is widely used to generate various illumination modes in the projection lithography system. The working principle and design methods of the DOE are discussed in detail in this paper. A mixed multi-region design method is proposed to calculate the phase of DOE based on the poor spatial coherence of excimer laser, using the Gerchberg–Saxton (GS) algorithm. The DOEs generating circular, dipole and quadrupole illumination modes are designed and simulated by three different methods: single region design, repeated multi-region design and mixed multi-region design. The performance of these DOEs are compared and analyzed with these three design methods. The mixed multi-region design method is used to design the DOEs generating three illumination modes, the diffraction efficiencies are greater than 85%, and the non-uniformities of illumination are less than 3%. The analysis results indicate that the DOE designed by the mixed multi-region design can achieve higher diffraction efficiency and illumination uniformity of the far-field intensity distribution without modifying the GS algorithm.     

Study on an optical system with coherent laser array source and phase optimization in turbulent atmosphere

Model of an optical system with coherent laser array source and the piston phase optimized by the stochastic parallel gradient descent algorithm is established. With this model, theory of beam propagation through the optical system in turbulent atmosphere is analyzed, and the analytical formulas of the beam average intensity along the propagation path are derived. Strehl ratio of the received beam induced by intensity disorderly distribution and power efficiency of the received beam are introduced to evaluate performance of the optical system. Under the H-V 5/7 atmospheric turbulent model, performance of an optical system with determinate parameters was calculated, and the influences of the propagation distance and the laser wavelength were numerically analyzed, respectively.     

An improved least square channel estimation algorithm for coherent optical OFDM system

This paper presents an improved processing added to conventional least square (LS) channel estimation to modify its performance for coherent optical orthogonal frequency division multiplexing (CO-OFDM) system. By testing selected limitation factors of the existing algorithms, the influence of our improved algorithm to the performance of CO-OFDM system were studied and compared with other published algorithms. The simulation results of the study demonstrated that the proposed approaches achieved better channel estimation performance and are considered as a more appropriate alternative for CO-OFDM system with the tradeoff between complexity and performance.     

Research on lenses assemble precision in complicate laser amplification system

In a certain amplification system, signal laser can be amplified from 1 nJ to 5 J. To realize a high quality imaging transfer, meet beam diameter expansion requirement, and get good filtering effects, three spatial filters are designed and assembled. Lenses in these spatial filters can be assembled and adjusted by their reflection spots to meet wave-front requirements. In this letter, we analyze precision of the assembling, and make a ray-tracing simulation to discuss the relation between assembling precision and lenses parameters. On the optimized distance of 1000 mm, adjusting precision of lens tilt can reach 5 mrad.     

Extraction and verification of coherent structures in near-wall turbulence

According to the characteristics of coherent structures in near-wall turbulence, an accurate extraction and verification method is developed based on wavelet transform (WT) and correlation analysis in this paper. At first, the fluid field of a turbulent boundary layer is measured precisely in a gravitational low-speed water tunnel. On the basis of the distribution of the coherent structures, velocity data of three test points are selected and analyzed, whose dimensionless heights are 20.8, 33.5, and 42.6. According to the frequency range of power spectrum density (PSD), coherent and incoherent structures are both extracted from the original signals using continuous and orthogonal wavelet transforms. To confirm the validity of the extracted signals, the probability density function (PDF) of each extracted signal is calculated. The result demonstrates that the incoherent structures obey the Gaussian distribution, while the coherent structures deviate from the Gaussian distribution. The PDFs of the coherent structures and the original signals are similar, which shows that the coherent structures make most contributions to the turbulence. For further verification, a correlation parameter between coherent and incoherent structures is defined, which evidently proves the validity of the extraction method in this paper.     

叠加激发双模压缩真空态的量子统计特性(英文)

从激发双模压缩真空态a^+mb^+m|ξ>出发构造了叠加态|Ψ>,研究了|Ψ>的量子统计特性.结果表明:在一定的条件下,随着相位差的变化,叠加态|Ψ>的平均光子数出现类似于Rabi振荡的崩塌与复原现象,而且与单个激发双模压缩真空态a^+mb^+m|ξ>相比,在叠加态|Ψ>中光场的相位压缩和亚泊松光子统计特性都得到了加强.     

KTP和7.5mol%Nb:KTP晶体在Nd:YAG激光中的倍频和和频

本文在获得精确的7.5mol%Nb:KTP晶体的Sellmeier主折射率色散方程的基础上,计算7.5mol%Nb:KTP晶体对1.0642μm和1.3188μmNd:YAG激光的倍频和和频的型相位匹配曲线.通过研究KTP和7.5mol%Nb:KTP晶体的主折射率,双折射率和相位匹配,可以看出Nb掺入KTP晶体后产生的折射率和双折射率的色散和各向异型的变化是引起KTP晶体相位变化的根本原因.     

激光抽运极化原子束磁偏转铀浓缩方案

将激光抽运选择性极化原子束磁偏转方案用于铀同位素浓缩,考察了铀原子基态各子能级的磁偏转特性,提出了选择性光轴运极化的实验方案,讨论了可能得到的浓缩结果。