Rapid and ultrasensitive colorimetric detection of mercury(II) by chemically initiated aggregation of gold nanoparticles

The article describes a method for rapid and visual determination of Hg(II) ion using unmodified gold nanoparticles (Au-NPs). It involves the addition of Au-NPs to a solution containing Hg(II) ions which, however, does not induce a color change. Next, a solution of lysine is added which induces the aggregation of the Au-NPs and causes the color of the solution to change from wine-red to purple. The whole on-site detection process can be executed in less than 15 min. Other amines (ethylenediamine, arginine, and melamine) were also investigated with respect to their capability to induce aggregation. Notably, only amines containing more than one amino group were found to be effective, but a 0.4 μM and pH 8 solution of lysine was found to give the best results. The detection limits for Hg (II) are 8.4 pM (for instrumental read-out) and 10 pM (for visual read-out). To the best of our knowledge, this LOD is better than those reported for any other existing rapid screening methods. The assay is not interfered by the presence of other common metal ions even if present in 1000-fold excess over Hg(II) concentration. It was successfully applied to the determination of Hg(II) in spiked tap water samples. We perceive that this method provides an excellent tool for rapid and ultrasensitive on-site determination of Hg(II) ions at low cost, with relative ease and minimal operation.

Rapid and ultrasensitive detection of mercury ions using gold nanoparticle based label-free colorimetric method with excellent sensitivity, easy operation and low cost.

     

Computational Insights into the Charge Relaying Properties of β‐Turn Peptides in Protein Charge Transfers

Density functional theory calculations suggest that β‐turn peptide segments can act as a novel dual‐relay elements to facilitate long‐range charge hopping transport in proteins, with the N terminus relaying electron hopping transfer and the C terminus relaying hole hopping migration. The electron‐ or hole‐binding ability of such a β‐turn is subject to the conformations of oligopeptides and lengths of its linking strands. On the one hand, strand extension at the C‐terminal end of a β‐turn considerably enhances the electron‐binding of the β‐turn N terminus, due to its unique electropositivity in the macro‐dipole, but does not enhance hole‐forming of the β‐turn C terminus because of competition from other sites within the β‐strand. On the other hand, strand extension at the N terminal end of the β‐turn greatly enhances hole‐binding of the β‐turn C terminus, due to its distinct electronegativity in the macro‐dipole, but does not considerably enhance electron‐binding ability of the N terminus because of the shared responsibility of other sites in the β‐strand. Thus, in the β‐hairpin structures, electron‐ or hole‐binding abilities of both termini of the β‐turn motif degenerate compared with those of the two hook structures, due to the decreased macro‐dipole polarity caused by the extending the two terminal strands. In general, the high polarity of a macro‐dipole always plays a principal role in determining charge‐relay properties through modifying the components and energies of the highest occupied and lowest unoccupied molecular orbitals of the β‐turn motif, whereas local dipoles with low polarity only play a cooperative assisting role. Further exploration is needed to identify other factors that influence relay properties in these protein motifs.     

Thermal Stability and Molecular Ordering of Organic Semiconductor Monolayers: Effect of an Anchor Group

The thermal stability and molecular order in monolayers of two organic semiconductors, PBI‐PA and PBI‐alkyl, based on perylene derivatives with an identical molecular structure except for an anchor group for attachment to the substrate in PBI‐PA, are reported. In situ X‐ray reflectivity measurements are used to follow the stability of these monolayers in terms of order and thickness as temperature is increased. Films have thicknesses corresponding approximately to the length of one molecule; molecules stand upright on the substrate with a defined structure. PBI‐PA monolayers have a high degree of order at room temperature and a stable film exists up to 250 °C, but decomposes rapidly above 300 °C. In contrast, stable physisorbed PBI‐alkyl monolayers only exist up to 100 °C. Above the bulk melting point at 200 °C no more order exists. The results encourage using anchor groups in monolayers for various applications as it allows enhanced stability at the interface with the substrate.     

Iron(III)‐Selective Chelation‐Enhanced Fluorescence Sensing for In Vivo Imaging Applications

A “turn‐on” pattern Fe³⁺‐selective fluorescent sensor was synthesized and characterized that showed high fluorescence discrimination of Fe³⁺ over Fe²⁺ and other tested ions. With a 62‐fold fluorescence enhancement towards Fe³⁺, the probe was employed to detect Fe³⁺ in vivo in HeLa cells and Caenorhabditis elegans, and it was also successfully used to elucidate Fe³⁺ enrichment and exchange infected by innexin3 (Inx3) in hemichannel‐closed Sf9 cells.     

Fabrication of Fluoropolymer Microtubes via RAFT Copolymerization of N,N′‐Methylene Bisacrylamide Gel Fibers and Fluoromonomer

Fluoropolymer microtubes with a smooth surface were fabricated in more than 70 % yield via reversible addition fragmentation chain transfer (RAFT) co‐polymerization of N,N′‐methylene bisacrylamide (MBA) gel fibers as both template and monomer, 2‐(perfluoro‐3‐methylbutyl)ethyl acrylate (R‐3420) as co‐monomer, and pentaerythritol tetraacrylate (PET4A) as cross‐linker. The resulting fluoropolymer microtubes were characterized fully by SEM, TEM, EDS, XPS, and FT‐IR. The influence of the monomer composition on the yields and morphologies of the tubes were investigated in detail. The results indicated that polymer microtubes with a smooth surface were obtained at suitable amounts of R‐3420 and PET4A. Because of the decreased solubility of MBA gel fibers, the wall thickness increased as more R‐3420 was used. In the presence of PET4A, the solution polymerization could be facilitated and more R‐3420 could be attached onto the tubes based on FT‐IR analysis. The water contact angle and swelling ratio measurements both revealed the low hydrophilicity and high lipophilicity of the fluoropolymer microtubes, which made the sample able to absorb toluene selectively in a water/toluene two‐phase system.     

Altering the Position of Phenyl Substitution to Adjust Film Morphology and Memory Device Performance

In this study, two structural isomers α‐PBT and β‐PBT, which only differ in the phenyl substituent position on the quinoline chromophore, have been designed and successfully synthesized. The influences of substituent position on the film morphology and the storage performance of the devices were investigated. Both molecules employed in the memory devices exhibited same nonvolatile binary (write‐once‐read‐many‐times; WORM) characteristics, but the switch threshold voltage (Vth) of the β‐PBT‐based device was clearly lower than that of the α‐PBT‐based device. Simulation results demonstrate that the variation of the phenyl substituent position led to different intermolecular stacking styles and thus to varied grain sizes for each film morphology. This work illustrates that altering the phenyl substituent position on the molecular backbone could improve the quality of the film morphology and reduce power consumption, which is good for the rational design of future advanced organic memory devices (OMDs).