Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006     

4-Amino-imidazole durchThorpe-Cyclisierung

The alkylation of arylaminomethylenecyanamides1 or cyano-imidothiocarbamates2 with -halogen carbonyl compounds followed by base catalysed cyclization yields substituted 4-amino-imidazoles4. Imidazo[4,5-d]pyrimidones5, 6 and imidazo[4,5-b]pyridines7 can be obtained from4.     

The electrocapillarity of polyacrylates

Summary The electrocapillary properties of polyacrylic acid have been studied by two methods. Exploratory measurements have been made of the effect of the polymer on the differential capacity of a mercury drop in 0.1 m sodium perchlorate. They showed that the polymer was strongly adsorbed over a wide range of potentials but that it did not appear to form a monolayer. The surface excess of polymer obtained from drop weight data showed a maximum at very low concentrations and then a decline at higher concentrations. The bulk of the work was carried out by making surface tension measurements, using a sessile mercury drop, in solutions of a fraction of polyacrylic acid (mol. wt. 7.02×10⁴) in potassium chloride at 0.01, 0.1, 0.2, and 0.5 m at 25°C.The data have been used to evaluate the surface excesses of the polymer and of the inorganic ions. The distribution of K⁺ and Cl^– in the electrical double layer and the contact adsorption of Cl^– on the mercury were very little affected by the presence of the polymer. The surface excess of polymer was always found to be greatest at low concentrations, to decrease steeply at first as the concentration was increased and then to decrease more slowly at higher concentrations.Possible explanations of this behaviour are discussed and it is concluded that the rapid decrease is a consequence of molecular weight dispersion and the stronger adsorption of high molecular weight polymer. The slow decrease in surface excess at higher concentrations may be a result of configurational changes of the polymer molecules.Surface pressure data show that, despite this decrease in the surface excess, the surface coverage reaches a high level at very low polymer concentrations and then continues to increase slowly as the concentration of polymer is increased. This apparent contradiction is due to changes in configuration of the adsorbed polymer molecules. At higher bulk concentrations the chain configurations are more compact and each adsorbed molecule makes more contacts with and so occupies a greater area of the mercury surface than at low concentrations.The conclusion is reached that the surface excess of polymer is mostly contained in a layer probably more than 1000 Å thick. It consists of a concentrated and entangled mass of polymer chains. Relatively few of these chains are in contact with the mercury at any istant. The concentration in this surface layer decreases steadily with increasing distance from the mercury surface and it merges without discontinuity into the bulk solution.With 10 figures in 22 details     

Stereochemie von Metallocenen, 40. Mitt.

Starting from optically active methylferrocene-- and--carboxylic acids (1 a and1 b) of known absolute configuration and enantiomeric purity about 15 chiral ferrocenes (of each isomeric series— and ) were obtained by suitable ligand transformations. Thereby (almost) all possible chiral combinations of the ligands CH₃, COOH (COO^–), COOCH₃, CN and NH₂ (NH₃ ⁺) were accessible which are necessary for a potential test of approximations of chirality functions for compounds with basic symmetry C_5v. The chiroptical properties of these disubstituted ferrocenes are recorded.Preliminary tests using a shortened Ansatz revealed large discrepancies between calculated () and found [M]_D-values. Possible reasons for this failure are discussed.

---

---

61. Mitt. über Ferrocenderivate

---

39. Mitt.:A. Meyer, H. Neudeck undK. Schlögl, Chem. Ber.110, 1403 (1977).

---

60. Mitt.:V. Rapi, K. Schlögl undB. Steinitz, J. Organometal. Chem.94, 87 (1975).     

Neue Wege der Analytik durch Kombination der direkten quantitativen Dünnschicht-Chromatographie mit elektronischer Datenverarbeitung

A computer program for direct evaluation of thin-layer chromatograms, which already was described earlier [3] has been tested with a laboratory and some technical formulations of a pesticide. Results have been compared with those obtained by two conventional methods. Mean relative standard deviation calculated from results compiled by electronic data processing (method A) is about 6%, compared to 10% received by graphic method (method C) which is employed by most investigators. In addition, overall time of analysis is 34% higher if graphic method is used. Method A saves time and expense especially in routine analysis because working of the process is easier and may be performed even by assistent personal. The proposed method is suitable for the determination of different active ingredients and impurities even in difficult technical products.     

Zur Kenntnis von Natrium-hexafluoromanganat(III)

Sodium hexafluoromanganate(III) has been synthesized by heating equimolecular quantities of Na₂MnF₅ and NaF in argon atmosphere. The compound is monoclinic witha=5.56 (1) Å,b=5.84 (1) Å,c=8.10 (2) Å, =90.7 (2) andZ=2. It is a high spin complex with _eff and the deformation of the octahedra is evident from its IR-spectra. Two enantiotropic transitions (at 562 and 653°C) and the melting point at 800°C have been observed.

---

---

8. Mitt.: Mh. Chem.106, 483 (1975).     

Discussion on the method for the measurement of the flexural modulus of coupled materials and reasons of the shifts of theQ −1 maxima caused by coupling

Summary When measuringQ ^–1 and the flexural resonance frequency of bars clamped at one end, constituted by a viscoelastic polymeric material glued to a rigid support of modulusE ₁, it is possible to calculate the componentsE ₂ andE ₂ of the complex elastic modulus of the polymeric material examined. In this work the minimum (critical) value of the ratioa=E ₂ /E ₁=a _c and the values of the ratioQ ₂ ^–1/Q ^–1=F ₁ are evaluated beyond which no exact calculation ofE ₂ and ofQ ₂ ^–1 is possible.Within the confidence limits of the linear viscoelasticity theory, these values depend on the accuracy of measurement of both frequency and resonance curve, as well as on the instrument employed, on the operating temperature and on the ratio between the thicknesses of the two coupled materials.In order to keep outside the critical conditions, the most convenient method involves the use of measurements of coupled test-pieces having different ratiosz between their thicknesses and of supports having different modulusE ₁, depending on the field of temperature of the analysis ofE ₂ and tg ₂ concerning and E.P.R. elastomer and a vulcanized cis-1,4 polyisoprene in very wide ranges of temperature comprising the glass transition. Moreover, it is demonstrated by analysis the shift on the temperature axis of the tg maximum of the composite test-piece with respect to the position of the tg maximum of the polymeric material alone.With 11 figures and 1 table     

The continuation of the periodic table up to Z = 172. The chemistry of superheavy elements

The chemical elements up toZ = 172 are calculated with a relativistic Hartree-Fock-Slater program taking into account the effect of the extended nucleus. Predictions of the binding energies, the X-ray spectra and the number of electrons inside the nuclei are given for the inner electron shells. The predicted chemical behaviour will be discussed for all elements betweenZ = 104-120 and compared with previous known extrapolations. For the elementsZ = 121–172 predictions of their chemistry and a proposal for the continuation of the Periodic Table are given. The eighth chemical period ends withZ = 164 located below Mercury. The ninth period starts with an alkaline and alkaline earth metal and ends immediately similarly to the second and third period with a noble gas atZ = 172.

---

Zusammenfassung Mit einem relativistischen Hartree-Fock-Slater Rechenprogramm werden die chemischen Elemente bis zur Ordnungszahl 172 berechnet, wobei der Einfluß des ausgedehnten Kernes berücksichtigt wurde. Für die innersten Elektronenschalen werden Voraussagen über deren Bindungsenergie, das Röntgenspektrum und die Zahl der Elektronen im Kern gemacht. Die voraussichtliche Chemie der Elemente zwischenZ = 104 und 120 wird diskutiert und mit bereits vorhandenen Extrapolationen verglichen. Für die ElementeZ =121–172 wird eine Voraussage über das chemische Verhalten gegeben, sowie ein Vorschlag für die Fortsetzung des Periodensystems gemacht. Die achte chemische Periode endet mit dem Element 164 im Periodensystem unter Quecksilber gelegen. Die neunte Periode beginnt mit einem Alkali- und Erdalkalimetall und endet sofort wieder wie in der zweiten und dritten Periode mit einem Edelgas beiZ = 172.

---

Resumé Les éléments chimiques jusqu'áZ = 172 sont calculés à l'aide d'un programme Hartree-Fock-Slater relativiste en tenant compte de l'extension du noyau. On fournit des prédictions quant aux énergies de liaison, aux spectres X et au nombre d'électrons dans les noyaux pour les couches électroniques internes. Le comportement chimique prévu est discuté pour tous les éléments entreZ = 104–120 et comparé aux extrapolations connues auparavant. Pour les éléments Z =121–172 on effectue des prévisions de propriétés chimiques et l'on propose un prolongement du Tableau Périodique. La huitième période chimique se termine àZ = 164 sous le mercure. La neuviéme période débute avec un métal alcalin et alcalino-terreux et se termine comme la seconde et la troisième période avec un gaz rare àZ = 172.

---

---

This work has been supported by the Bundesministerium für Wissenschaft und Bildung and by the Deutsche Forschungsgemeinschaft.