Cu-In-O composite thin films deposited by reactive DC magnetron sputtering

Cu-In-O composite thin films were deposited by reactive DC magnetron sputtering at room temperature. The samples were characterized by scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), X-ray diffraction (XRD), UV/vis spectrophotometer, four-probe measurement and Seebeck effect measurement, etc. The samples contain Cu, In and O. The ratios of Cu to In and O to In increase with increase in O₂ flow rates. The ratio of Cu to In is over 1 and this suggests that Cu is in excess. The obtained Cu-In-O thin films are very possibly made of rhombohedral In₂O₃ and monoclinic CuO. Transmittance of the films decreases with increase in O₂ flow rate. The decrease in transmittance results from increase in Cu content in the films. The optical band gap of all the samples is estimated to be 4.1-4.4 eV, which is larger than those of In₂O₃ and CuO. The sheet resistance of the films decreases with increase in O₂ flow rate. Conductivity of the films is a little low, due to the addition of Cu and the poor crystalline quality of the film. The conduction behavior of the films is similar to that of In₂O₃ and the conduction mechanism of Cu-In-O thin films is through O vacancy.     

Predicting Polymorphism of Electrospun Polyvinylidene Fluoride Membranes by Their Morphologies

Although electrospinning of polyvinylidene fluoride (PVDF) has been studied for more than 10 years, the crystalline phase differentiation of the electrospun mats is still normally through the combination of different characterization techniques, and the relationship between polymorphism and morphology of the fibers in electrospun PVDF membranes has never been reported. Here, we show their close relationships by conducting room-temperature electrospinning experiments on various polymer/solvent systems. The electrospun membranes full of bead-free fibers have a very high fraction of β-phase, F(β), over 90%, and high orientation, whereas the membranes comprising beads and/or a large number of beaded fibers most often result in a low fraction of β-phase (F(β) normally below 50%) and low orientation. On the other hand, electrospun membranes consisting of both bead-free fibers and a very limited number of beaded fibers showed a medium high fraction of β-phase, F(β) more than 70% but less than 90%. These findings suggest the feasibility of intuitively predicting the crystalline phase of electrospun PVDF membranes directly by their morphologies, which is obviously simple, inexpensive and convenient for future investigations.     

Exploring Microstructures and Interphase Properties of Surface- Grafted Diblock Copolymers in a Homopolymer Melt by Self-Consistent Field Theory Simulations

Polymeric self-consistent field theory is used to investigate microstructures and interphase properties of diblock copolymers grafted onto solid surfaces in a homopolymer melt. The calculations show that the grafted diblock copolymers can self-assemble into hemispherical microstructures at low grafting densities of the diblock copolymers. The morphology transforms into hemicylinder-like and sandwich-like lamellar microstructures with an increase in the chain-grafting density. The effective thickness of the grafted block layer and the interphase width between the homopolymer melt and the grafted copolymers strongly depend on the physicochemical parameters of the system, such as the composition of the grafted copolymer, the chemical incompatibility between the different components, the length ratio of grafted copolymer to homopolymer, and the grafting density of the diblock copolymers. In addition, the above computational results of microphase-separated structures and interphase properties are qualitatively compared with our previous experimental observations. The comparison indicates that our theoretical results not only reproduce the general feature of the experimental observations, but also elucidate the internal structural information and complement the findings in the region of high grafting densities of diblock copolymers.     

Laser-induced damage of the optical films prepared by electron beam evaporation and ion beam sputtering in vacuum

The laser-induced damage characteristics and adsorption effects of organic contamination molecules of two high reflectors (HR) prepared by electron beam evaporation (EB) and ion beam sputtering (IBS) method at 1064 nm is investigated in vacuum. It is found that EB films show the performance degradation of laser induced damages in vacuum while for IBS film, seems to have no this effect, in comparison with air environment. In addition, EB coatings also have the strong affinity with organic contamination molecules, in contrast of IBS films. The results reveal that ion beam sputtering (IBS) method seem to be one of the favorite film deposition techniques of the optical films used in vacuum and space environments.     

Generation of 287 W, 5.5 ps pulses at 78 MHz repetition rate from a cryogenically cooled Yb:YAG amplifier seeded by a fiber chirped-pulse amplification system

We generate linearly polarized, 287 W average-power, 5.5 ps pulses using a cryogenically cooled Yb:YAG amplifier at a repetition rate of 78 MHz. An optical-to-optical efficiency of 41% is obtained at 700 W pump power. A 6 W, 0.4 nm bandwidth picosecond seed source at 1029 nm wavelength is constructed using a chirped-pulse fiber amplification chain based on chirped volume Bragg gratings. The combination of a fiber amplifier system and a cryogenically cooled Yb:YAG amplifier results in good spatial beam quality at large average power. Low nonlinear phase accumulation as small as 5.1 x 10(-3) rad in the bulk Yb:YAG amplifier supports power scalability to a > 10 kW level without being affected by self-phase modulation. This amplification system is well suited for pumping high-power high-repetition-rate optical parametric chirped-pulse amplifiers.     

Stabilitätsverhalten der Stösselstange in geradgeführten Kurvengetrieben

Übersicht In diesem Beitrag wird die Stößelstange in geradgeführten Kurvengetrieben als ein gedämpfter Euler-Bernoulli-Stab aufgefaßt. Nach dem Aufstellen der Differentialgleichung für die Querschwingungen mittels des Hamiltonschen Prinzips wird diese mit Hilfe des Galerkinschen Verfahrens auf ein System von Hillschen Differentialgleichungen reduziert. Dann werden für ein allgemeines Kurvenbewegungsgesetz Näherungsformeln für die Grenzkurven der Instabilitätsbereiche hergeleitet, wobei der (bezogene) Stößelhub in Abhängigkeit der Kurvenwinkelgeschwindigkeit dargestellt wird. Die Ergebnisse werden durch ein Beispiel veranschaulicht.

---

On the stability behaviour of the reciprocating follower in cam mechanisms

Summary This paper is concerned with the simulation of the reciprocating follower in cam mechanisms as a damped Euler-Bernoulli beam. The governing partial differential equation of the transversal vibrations of the follower is derived, using Hamilton's principle. Then it is reduced to a system of Hill-equations by the Galerkin method. For the case of a general motion of the follower the approximate formulas of the boundaries between the stable and unstable regions are derived, represented in the plane of strok depending on the angular velocity. The obtained results are illustrated by an example.

     

An iterative method of evaluation of elastic-plastic deflections of hyperstatic framed structures

Summary The concept of substitutive concentrated elastic-plastic rotations, replacing actual elasticplastic zones is used, together with an iterative method of determination of the bending moment distribution to simplify the evaluation of elastic-plastic deflections of hyperstatic beams and frames.

---

Eine iterative Methode der Auswertung von elastisch-plastischen Verschiebungen für statisch unbestimmte Rahmen

Übersicht Die Idee von fiktiven Ersatzrotationen, welche die tatsächlichen elastisch-plastischen Zonen modelliert, wird mit einer iterativen Methode kombiniert, um eine relativ einfache Bestimmung von Biegemomentenfeldern in statisch unbestimmten Balken und Rahmen zu ermöglichen. Die resultierenden Verschiebungen, ergeben sich mit ausreichender Genauigkeit.