大气模式与气溶胶模型对辐射传输计算的影响

大气模式与气溶胶模型选择是影响定量遥感应用的辐射传输计算的重要因素。人们一般凭感性认识去进行选择,有一定随意性,对其带来的影响程度关注甚少。以太阳辐射计测量为依据,对大气模式与气溶胶模型选择方法作了研究,并利用经辐射定标过的光谱辐射计地面测量对辐射传输计算精度进行了验证。在昆明进行的试验表明,在0.50~0.68μm范围内,选择中纬度冬季大气模式和大陆型气溶胶,经辐射传输计算后得到的光谱辐射亮度与光谱辐射计测量结果一致性很好,差别在3.3%以内;变换大气模式对辐射传输计算产生明显影响,差别达10%左右;选择不同的气溶胶模型对辐射传输计算影响也很大,差别达11%左右。基于辐射计测量的大气模式与气溶胶模型选择避免了主观选择的不可靠性,有益于减少辐射传输计算或卫星遥感大气订正的误差。     

Ultrafast nonlinear optical properties of dye-doped PMMA discs irradiated by 40 fs laser pulses

The two-photon absorption (TPA) characteristics of PMMA discs doped with three different dyes were studied using an fs-pulsed Ti-Sapphire laser as the pump source, and employing the open-aperture Z-scan technique. TPA cross-sections obtained for PMMA doped with the dyes PM597, DCM and rhodamine 6G–rhodamine B (co-doped) were found to be equal to 24.7, 33.3 and 32.3 GM, respectively (1 GM=10^?50 cm⁴ s phot^?1 mol^?1). Furthermore, two-photon fluorescence was measured for the samples containing DCM and rhodamine 6G–rhodamine B (co-doped). Compared to the one-photon fluorescence spectrum, the peaks in the two-photon fluorescence spectrum were red shifted and the extent of red shift increased with increasing doping concentration. We have also observed that the red shift in the two-photon fluorescence peak of the samples in the solid form is much larger than that in the solution state. This phenomenon could be explained by a twisted intra-molecular charge transfer model.     

电子式互感器高频数据采集与传输方案

针对当前电力系统电子式互感器采样率偏低,难以满足行波测距装置准确定位电力故障的问题,提出了电子式互感器高频信号采集与传输方案;电子式互感器内部为Rogowski 线圈,电网电流信号被其微分作用转换为小电压信号并附加了90°超前相差,设计积分电路补偿该相差;设计采样率为2 MSps的高频信号采集电路,FPGA通过LVDS接口读取采样数据,并进行幅值处理,最后利用大容量FIFO(先入先出单元)进行缓存;由于百兆网数据传输速率有限,利用FPGA设计吉比特光纤以太网传输特定格式报文,把电流数据传输至电力行波测距装置;解决了积分电路由于运放输入偏置电压带来的积分饱和问题,以及高速ADC输入量程小于输入信号幅值等技术难点;试验结果表明,高频信号采集及传输方案能够满足行波测距装置百米级别的测距精度要求,具有一定工程应用价值。     

多种通信手段在遇险救生体系中的应用研究

我国海域辽阔,各类船只的水上航行和作业安全密切关系到生命和财产的安全,需要可靠保障。由于海上险情发生的随机性和突发性,岸上险情监视力量必须全时、全天候地开设险情通信通道,接收海上遇险对象的遇险呼救信号并及时对遇险信息进行处理。因此,岸基必须建设遇险救生信息系统并规定必要的信息传输流程,保障险情报知通信的顺利完成。文章简要分析了目前海上救生的通信现状,对常用通信手段进行了分析与介绍,并提出了一种整合各通信手段的设计方法,实现了多种通信手段的综合使用以及统一调度,大幅提升险情信息的传输和处理效率,提高险情信息的保密性,为救援工作提供了精确可靠的问责手段。     

Asymmetric multimode interference isolator based on nonreciprocal phase shift

This paper presents an asymmetric multimode interference-based (MMI) optical isolator, by utilizing the magneto-optical nonreciprocal phase shift (NPS). Equivalent beam propagation method (BPM) simulation of symmetric and asymmetric isolators are performed using configuration of Air/Ce:YIG/SiO₂ on silicon substrate for integration. The asymmetric isolator is found to be much more compact in size and efficient in isolation compared with symmetric isolator. Simulation results show that the isolation of asymmetric structure is 23.8 dB higher than that of symmetric one. It is mainly because both symmetric mode and anti-symmetric mode are excited in asymmetric structure and hence can interfere destructively. The proposed device may play an important role in the optical communication systems and photonic integrated devices.     

Multiparty quantum secret sharing based on Bell measurement

A multiparty quantum secret sharing scheme based on Bell measurement is proposed and analyzed. In this scheme, all agents are not required to prepare entangled states or perform any local unitary operation. The security of the protocol is also analyzed. It is shown that any eavesdropper will introduce errors invariably and be detected if he tries to steal information about Trent’s secret. Moreover, because no classical bit needs to be transmitted except those for detection, the total efficiency of the scheme approaches to 100%.     

Color image encoding in dual fractional Fourier-wavelet domain with random phases

A new cryptology in dual fractional Fourier-wavelet domain is proposed in this paper, which is calculated by discrete fractional Fourier transform and wavelet decomposition. Different random phases are used in different wavelet subbands in encryption. A new color image encoding method is also presented with basic color decomposition and encryption respectively. All the keys, including random phases and fractional orders in R, G and B three channels, should be correctly used in decryption, otherwise people cannot obtain the totally correct information. Some numerical simulations are presented to demonstrate the possibility of the method. It would have widely potential applications in digital color image processing and protection.     

Measuring physical parameters with surface plasmon resonance heterodyne interferometry

If the incident angle of a light beam on the boundary surface between the thin metal film of a surface plasmon resonance (SPR) apparatus and a test medium is equal to or very near the resonant angle, then the phase difference between the p- and s-polarizations of the reflected light is related to the associated physical parameter. The phase difference can be measured accurately with heterodyne interferometry. If the relationship between the phase difference and the associated physical parameter is specified, then the associated physical parameter can be estimated from the phase difference data. This method has the benefits of both common-path interferometry and heterodyne interferometry, such as simple structure, high stability, high resolution, easy operation, and rapid real-time measurement.     

Lead-free KNLNT piezoelectric ceramics for high-frequency ultrasonic transducer application

This paper presents the latest development of a lead-free piezoelectric ceramic and its application to transducers suitable for high-frequency ultrasonic imaging. A lead-free piezoelectric ceramic with formula of (K_0.5Na_0.5)_0.97Li_0.03(Nb_0.9 Ta_0.1)O₃ (abbreviated as KNLNT-0.03/0.10) was fabricated and characterized. The material was found to have a clamped dielectric constant ε₃₃^S/ε₀ = 890, piezoelectric coefficient d₃₃ = 245 pC/N, electromechanical coupling factor k_t = 0.42 and Curie temperature T_c > 300 °C. High-frequency (40 MHz) ultrasound transducers were successfully fabricated with the lead-free material. A representative lead-free transducer had a bandwidth of 45%, two-way insertion loss of -18 dB. This performance is comparable to reported performances of popular lead-based transducers. The comparison results suggest that the lead-free piezoelectric material may serve as an alternative to lead-based piezoelectric materials for high-frequency ultrasonic transducer applications.     

Effect of sputtering power on surface topography of dc magnetron sputtered Ti thin films observed by AFM

Titanium films were deposited on glass substrates at room temperature by direct current (dc) magnetron sputtering at fixed Ar pressure of 1.7 Pa and sputtering time of 4 min with different sputtering power ranging from 100 to 300 W. Atomic force microscopy (AFM) was used to study topographic characteristics of the films, including crystalline feature, grain size, clustering and roughening. The amorphous-like microstructure feature has been observed at 100-150 W and the transition of crystal microstructure from amorphous-like to crystalline state occurs at 200 W. The increase in grain size of Ti films with the sputtering power (from 200 to 300 W) has been confirmed by AFM characterization. In addition, higher sputtering power (300 W) leads to the transformation of crystal texture from globular-like to hexagonal type. The study has shown that higher sputtering power results in the non-linear increase in deposition rate of Ti films. Good correlativity between the surface roughness parameters including root mean square (RMS) roughness, surface mean height (Ra) and maximum peak to valley height (P-V) for evaluating the lateral feature of the films has been manifested. Surface roughness has an increasing trend at 100-250 W, and then drops up to 300 W.