Hydroxybromierung und Methoxybromierung von (Z)-Cycloocten

In addition totrans-2-bromocyclooctanol andtrans-1,2-dibromocyclooctane,cis-4-bromocyclooctanol,cis-1,4-dibromocyclooctane,trans-1,4-dibromocyclooctane, and (Z)-5-bromocyclooctene are obtained, when (Z)-cyclooctene is treated with N-bromosuccinimide in the presence of water. Similarly the methoxybromination of (Z)-cyclooctene gives transanular products.     

Interaction of dextran sulfates with positively and negatively charged silver bromide hydrosols

Summary The effects of dextran sulfates of different molecular weights and charge densities on the stability of positively and negatively charged silver bromide solsin statu nascendi have been studied by means of light scattering.The plots of scattering intensities of a positively charged sol against the concentration of the added dextran sulfates show one pronounced maximum, the position which is independent on the molecular weight of the polyelectrolyte used. The maximum shifts to lower polyion concentrations with dilution of the sol.The effect of polyanions on the stability of silver bromide sols of the same sign of charge were investigated as a function of molecular weight of the polymers, the sol concentration, the charge and the concentration of counterions, and the addition of methanol. Destabilization only occurred if sufficient amount of indifferent electrolyte was present in the system. However, the concentration of counterions necessary to produce a flocculation maximum was lower in the presence of the polyelectrolytes than in their absence. The results obtained were compared with the data on sols containing nonionic dextrans reported earlier.

---

Zusammenfassung Der Einfluß der Dextransulfate von verschiedenen Molekulargewichten und Ladungsdichten auf die Stabilität der positiv und negativ geladenen Silberbromid-Solein statu nascendi wurden durch Lichtstreuung untersucht. Wenn die Intensitäten der Lichtstreuung eines positiv geladenen Silberbromid-Sols gegen die Konzentration der zugesetzten DextranSulfate aufgetragen werden, tritt ein ausgeprägtes Maximum auf, dessen Lage von dem Molekulargewicht des angewandten Polyelektrolyten unabhängig ist. Bei Verdünnung des Sols wird das Maximum zur niedrigeren Konzentration des Polyanions verschoben.Der Einfluß der Polyanionen auf die Stabilität der Silberbromid-Sole mit gleichem Ladungsvorzeichen wurde in Abhängigkeit von dem Molekulargewicht des zugesetzten Dextransulfats, der Solkonzentration, der Ladung und Konzentration der Gegenionen und dem Zusatz von Methylalkohol untersucht. Destabilisierung wird nur in Anwesenheit einer genügenden Menge von Neutralelektrolyten in den untersuchten Systemen beobachtet. Die Konzentration der Gegenionen, die ein Flockungsmaximum verursachen, ist immer niedriger als die kritische Koagulationsmenge derselben Ionen für das gleiche Sol in Abwesenheit von Makroionen. Die Resultate wurden mit den Wechselwirkungen der Silberbromid-Sole mit nichtionogenen Dextranen verglichen, und der Mechanismus der Flockung durch Polyelektrolyte wurde diskutiert.

---

---

5 figures and 1 table

---

Supported by the NSF Grant GP 42331 X.

---

A part of the Ph.D. Thesis by David Lindsay.     

Vernetzung und Abbau von Polyäthylenterephthalat durch Elektronenbestrahlung

Zusammenfassung PÄT-Folien wurden in Luft, Stickstoff und Vakuum bei 20 °C mit 1 MeV-Elektronen bestrahlt. Untersucht wurden Löslichkeit und Viskosität von Proben, die unmittelbar nach der Bestrahlung gelöst wurden.In allen untersuchten Fällen trat bei hohen Bestrahlungsdosen ein unlöslicher, d. h. vernetzter Anteil auf, dessen Ausbildung jedoch durch in den Proben enthaltene Feuchtigkeit verzögert werden kann. Bei niedrigen Bestrahlungsdosen bewirkt Feuchtigkeit einen Abbau des Polymeren, wie durch Viskositätsmessungen gezeigt wird.Aus den Gel-Messungen wurde derp ₀/q ₀-Wert für Bestrahlung in Luft, Stickstoff und Vakuum zu 1,05 bestimmt.Die Änderung des Gel-Anteils bei Lagerung der Proben zwischen Bestrahlung und Lösung wird diskutiert.

---

Summary Polyethyleneterephthalate samples were irradiated in air, nitrogen and vacuum at 20 °C with 1 MeV electrons. The solubility of the samples and the viscosity of the solutions were studied immediately after irradiation. At high doses an insoluble crosslinked part was always observed. Crosslinking was delayed by moisture in the samples. At low irradiation doses moisture causes chain scission as shown by viscosity measurements. The ratiop ₀/q ₀ of degradation to crosslinking in the case of irradiation in air, nitrogen and vacuum was found by gel measurements to be 1.05. The insoluble gel-part changes with increasing storage time of the samples between irradiation and solution.

---

---

Herrn Diplom-PhysikerH. Fischer sei an dieser Stelle für wertvolle Anregungen und Diskussionen besonders gedankt.     

Effect of ionic additives on the elution of sodium aryl sulfonates in supercritical fluid chromatography

Addition of a small amount of polar solvent (i.e., modifier) to CO2 in packed column supercritical fluid chromatography (SFC) has shown major improvements in both polar analyte solubility and interaction of the polar analyte with the stationary phase. Recently, the addition of an ionic component (i.e., additive) to the primary modifier by one of us has been shown to extend even further the application of SFC to polar analytes. In this work, the effect of various ionic additives on the elution of ionic compounds, such as sodium 4-dodecylbenzene sulfonate and sodium 4-octylbenene sulfonate, has been studied. The additives were lithium acetate, ammonium acetate, tetramethylammonium acetate, tetrabutylammonium acetate, and ammonium chloride dissolved in methanol. Three stationary phases with different degrees of deactivation were considered: conventional cyanopropyl, deltabond cyanopropyl, and bare silica. The effect of additive concentration and additive functionality on analyte retention was investigated. Sodium 4-dodecylbenzene sulfonate was successfully eluted using all the additives with good peak shape under isocratic/isobaric/isothermal conditions. Different additives, however, yielded different retention times and in some cases different peak shapes.     

Viskoelastische Eigenschaften von Polyisobutylenen in verdünnten Lösungen

Zusammenfassung Die Speicher- und VerlustmodulnG undG verdünnter Lösungen (2–4%) dreier Isobutylenpolymerisate mit den Molekulargewichten 0,63, 1,29 und 11×10⁵ wurden in der Apparatur vonBirnboim undFerry über einen Frequenzbereich von 0,4–400 Hz und einen Temperaturbereich von –17,5 bis 25,0° bestimmt. Für die scharf fraktionierten Polymerisate von niederem Molekulargewicht ergab die Frequenzabhängigkeit der Moduln eine ausgezeichnete Übereinstimmung mit der Theorie vonZimm. Die aus den experimentell erhaltenen Kurven ermittelten Molekulargewichte und größten Relaxationszeiten waren von der erwarteten Größenordnung. Für das Polymerisat mit höherem Molekulargewicht entsprach die Frequenzabhängigkeit vonG undG – _s jedoch der Theorie vonRouse. Der Einfluß der hydrodynamischen Wechselwirkung in der Bewegung der Knäuelsegmente, in welchem der Unterschied zwischen den beiden Theorien besteht, erscheint als von der Größe des Molekulargewichts abhängig.

---

Summary The storage and loss moduliG andG of dilute (2–4%) solutions of three polyisobutylenes of molecular weight 0.63, 1.29, and 11×10⁵ were determined in the apparatus ofBirnboim andFerry over a frequency range of 0.4 to 400 cps, and a temperature range of –17.0 to 25.0°. The sharply fractionated polymers of low molecular weight showed a frequency dependence in excellent agreement with the theory ofZimm. The experimentally determined molecular weights and terminal relaxation times were of the expected order of magnitude. The frequency dependence of the polymer of highest molecular weight, however, conformed more closely to the theory ofRouse. The influence of the hydrodynamic interaction on the motion of the coil segments, which constitutes the difference in the two theories, appears to depend on the magnitude of the molecular weight.

     

Copolymerization of styrene. V. Copolymerization with α-cyanocinnamamide

Copolymers of styrene with α-cyanocinnamamide were prepared by free radical initiation in bulk and in DMF solution and also by thermal initiation in bulk. The copolymerization parameters were determined by the conventional scheme of copolymerization and by an improved scheme taking into account the penultimate unit. Different values of the copolymerization parameters were obtained at the above mentioned different polymerization conditions, indicating the existence of a solvent effect. The influence of the comonomer on some of the basic properties, like intrinsic viscosity, solubility, melting range, and glass transition temperature and on some mechanical and behavior properties of the copolymers was studied in comparison with homopolystyrene.     

The reaction of 2-picoline N-Oxide with o-substituled benzoates and lsatoic anhydrides

The reaction of 2-picoline N-Oxide anion with o-substituted henzoates and isatoic anhydrides to give synthetically useful l-(2-methoxyphenyl)-2-(2-pyridinyl)ethanone N-oxides, I-(2-hydroxy-phenyJ)-2-(2-pyridinyl)ethanone N-oxides and I -(2-arninopheny])-2-(2-pyridinyl)ethanone N-oxides is described.     

Spektrophotometrische Bestimmung von L-Askorbinsäure mit 2,2',5,5'-Tetra-(4-nitrophenyl)-3,3'-(3,3'-dimethoxy-4, 4'-biphenyl)-ditetrazoliumchlorid (TNBT)

Zusammenfassung Die Optimalbedingungen für die spektrophotometrische Bestimmung der L-Askorbinsäure mit TNBT wurden ermittelt. Die L-As-korbinsäure wurde in Anwesenheit eines 100fachen Überschusses folgender Stoffe bestimmt: Glukose, Fruktose, Saccharose, Wein-, Zitronen-, Oxal-, Äpfel- und Bernsteinsäure. 0,5g/ml ist die minimale Askorbinsäurekonzentration, die sich bestimmen läßt. Die rel. Standardabweichung beträgt 2,1%, der rel. Fehler 0,875%.

---

Spectrophotometric assay of L. ascorbic acid with 2,2,5,5-tetra-(4-nitro-phenyl)-3, 3-(3,3-dimethoxy-4,4-biphenyl)-ditetrazolium chloride (TNBT)

Summary The optimal conditions for spectrophotometric assay of L-ascorbic acid with TNBT were determined. L-ascorbic acid was assayed in the presence of a 100 fold excess of the following substances: glucose, fructose, sucrose, tartaric acid, citric acid, oxalic acid, malic acid and succinic acid. 0.5g/ml is the minimum concentration of ascorbic acid which can be assayed. The relative standard deviation is 2.1%, the relative error 0.875%.

     

Characterization of internal salts by laser mass spectrometry

An intermolecular alkyl transfer reaction (ATR) leading to ion-pair formation has been observed for internal salts by using laser mass spectrometry (l.m.s.). Positive- and negative-ion spectra both show evidence for alkyl transfer. Both the LAMMA-500 (transmission) and LAMMA-1000 (reflection) laser mass spectrometers were used. The positive-ion laser mass spectra obtained by these two instruments show some significant differences; no significant differences were observed in the negative-ion spectra. Results obtained for quaternary ammoniohexanoates as a function of laser power indicate that the extent of ATR is greater at high laser power. Addition of a small amount of p-toluenesulfonic acid to the ammoniohexanoates reduces fragmentation and enhances the intensity of the quasimolecular ion (M + H)⁺ relative to ATR. Results from deuterated sultaines were used to confirm intermolecular alkyl transfer and to elucidate some fragmentation processes. Field-desorption (f.d.) mass spectra of internal salts show similarities and differences from l.m.s.; not all internal salts showed the alkyl transfer reaction in f.d. Cluster ion formation was observed in f.d.m.s. but not in l.m.s.     

A statistical thermodynamic supermolecule-continuum study of ion hydration: Cell and shell methods

A theoretical study of ion hydration using the statistical thermodynamic supermolecule-continuum method is described. The cell and shell methods are used for configurational averaging. Enthalpies, free energies and entropies are calculated for Li⁺, Na⁺, K⁺, F^– and Cl^– each four coordinated with water. The results are in reasonable accord with experiment. A comparison of the site method, cell method and shell method results is presented. The supermolecule-continuum approach to solvent effects seems to be capable of accommodating essential features for the calculation of solvation energy and solvent effects on structure and properties.