Spatially Resolved Confocal Resonant Raman Microscopic Analysis of Anode‐Grown Geobacter sulfurreducens Biofilms

When grown on the surface of an anode electrode, Geobacter sulfurreducens forms a multi‐cell thick biofilm in which all cells appear to couple the oxidation of acetate with electron transport to the anode, which serves as the terminal metabolic electron acceptor. Just how electrons are transported through such a biofilm from cells to the underlying anode surface over distances that can exceed 20 microns remains unresolved. Current evidence suggests it may occur by electron hopping through a proposed network of redox cofactors composed of immobile outer membrane and/or extracellular multi‐heme c‐type cytochromes. In the present work, we perform a spatially resolved confocal resonant Raman (CRR) microscopic analysis to investigate anode‐grown Geobacter biofilms. The results confirm the presence of an intra‐biofilm redox gradient whereby the probability that a heme is in the reduced state increases with increasing distance from the anode surface. Such a gradient is required to drive electron transport toward the anode surface by electron hopping via cytochromes. The results also indicate that at open circuit, when electrons are expected to accumulate in redox cofactors involved in electron transport due to the inability of the anode to accept electrons, nearly all c‐type cytochrome hemes detected in the biofilm are oxidized. The same outcome occurs when a comparable potential to that measured at open circuit (?0.30 V vs. SHE) is applied to the anode, whereas nearly all hemes are reduced when an exceedingly negative potential (?0.50 V vs. SHE) is applied to the anode. These results suggest that nearly all c‐type cytochrome hemes detected in the biofilm can be electrochemically accessed by the electrode, but most have oxidation potentials too negative to transport electrons originating from acetate metabolism. The results also reveal a lateral heterogeneity (x–y dimensions) in the type of c‐type cytochromes within the biofilm that may affect electron transport to the electrode.     

On‐Line Monitoring of Chemical Reactions by using Bench‐Top Nuclear Magnetic Resonance Spectroscopy

Real‐time nuclear magnetic resonance (NMR) spectroscopy measurements carried out with a bench‐top system installed next to the reactor inside the fume hood of the chemistry laboratory are presented. To test the system for on‐line monitoring, a transfer hydrogenation reaction was studied by continuously pumping the reaction mixture from the reactor to the magnet and back in a closed loop. In addition to improving the time resolution provided by standard sampling methods, the use of such a flow setup eliminates the need for sample preparation. Owing to the progress in terms of field homogeneity and sensitivity now available with compact NMR spectrometers, small molecules dissolved at concentrations on the order of 1 mmol L^?1 can be characterized in single‐scan measurements with 1 Hz resolution. Owing to the reduced field strength of compact low‐field systems compared to that of conventional high‐field magnets, the overlap in the spectrum of different NMR signals is a typical situation. The data processing required to obtain concentrations in the presence of signal overlap are discussed in detail, methods such as plain integration and line‐fitting approaches are compared, and the accuracy of each method is determined. The kinetic rates measured for different catalytic concentrations show good agreement with those obtained with gas chromatography as a reference analytical method. Finally, as the measurements are performed under continuous flow conditions, the experimental setup and the flow parameters are optimized to maximize time resolution and signal‐to‐noise ratio.     

Inhibition of copper corrosion in acidic sulphate media by eco-friendly amino acid compound

This investigation aimed to study a “green” non-toxic biodegradable copper corrosion inhibitor in an acidic sodium sulphate solution. The methods used in the investigation of cysteine as a copper corrosion inhibitor in an acidic sodium sulphate solution were: potentiodynamic measurements, open circuit potential measurements, and chronoamperometric measurements. Optical microscopy was used in addition to electrochemical methods. Potentiodynamic measurements show that cysteine has good inhibitory properties in an acidic medium. Polarisation curves indicate that the presence of cysteine in a sulphate solution decreases the current density and that using various cysteine concentrations results in the formation of a protective film on the surface of the electrode due to the formation of the Cu(I)-cys complex. These results are confirmed by chronoamperometric measurements. Furthermore, it is clear from microphotographs that a protective film does form on copper electrode in the presence of cysteine. The Langmuir adsorption isotherm indicates that cysteine is chemisorbed on the surface of the electrode.     

Electro-Mechanochemical Atom Transfer Radical Cyclizations using Piezoelectric BaTiO3

The formation and regeneration of active Cu^I species is a fundamental mechanistic step in copper-catalyzed atom transfer radical cyclizations (ATRC). Typically, the presence of the catalytically active Cu^I species in the reaction mixture is secured by using high Cu^I catalyst loadings or the addition of complementary reducing agents. In this study it is demonstrated how the piezoelectric properties of barium titanate (BaTiO₃) can be harnessed by mechanical ball milling to induce electrical polarization in the strained piezomaterial. This strategy enables the conversion of mechanical energy into electrical energy, leading to the reduction of a Cu^II precatalyst into the active Cu^I species in copper-catalyzed mechanochemical solvent-free ATRC reactions.     

A Biomimetic Nanoparticle to “Lure and Kill” Phospholipase A2

Inhibition of phospholipase A2 (PLA2) has long been considered for treating various diseases associated with an elevated PLA2 activity. However, safe and effective PLA2 inhibitors remain unavailable. Herein, we report a biomimetic nanoparticle design that enables a “lure and kill” mechanism designed for PLA2 inhibition (denoted “L&K-NP”). The L&K-NPs are made of polymeric cores wrapped with modified red blood cell membrane with two inserted key components: melittin and oleyloxyethyl phosphorylcholine (OOPC). Melittin acts as a PLA2 attractant that works together with the membrane lipids to “lure” in-coming PLA2 for attack. Meanwhile, OOPC acts as inhibitor that “kills” PLA2 upon enzymatic attack. Both compounds are integrated into the L&K-NP structure, which voids toxicity associated with free molecules. In the study, L&K-NPs effectively inhibit PLA2-induced hemolysis. In mice administered with a lethal dose of venomous PLA2, L&K-NPs also inhibit hemolysis and confer a significant survival benefit. Furthermore, L&K-NPs show no obvious toxicity in mice. and the design provides a platform technology for a safe and effective anti-PLA2 approach.     

Chemical Proteomic Profiling of Protein 4′-Phosphopantetheinylation in Mammalian Cells

Protein 4′-phosphopantetheinylation is an essential post-translational modification (PTM) in prokaryotes and eukaryotes. So far, only five protein substrates of this specific PTM have been discovered in mammalian cells. These proteins are known to perform important functions, including fatty acid biosynthesis and folate metabolism, as well as β-alanine activation. To explore existing and new substrates of 4′-phosphopantetheinylation in mammalian proteomes, we designed and synthesized a series of new pantetheine analogue probes, enabling effective metabolic labelling of 4′-phosphopantetheinylated proteins in HepG2 cells. In combination with a quantitative chemical proteomic platform, we enriched and identified all the currently known 4′-phosphopantetheinylated proteins with high confidence, and unambiguously determined their exact sites of modification. More encouragingly, we discovered, using targeted chemical proteomics, a potential 4′-phosphopantetheinylation site in the protein of mitochondrial dehydrogenase/reductase SDR family member 2 (DHRS2).