Crystal structure and magnetic structure of TbOOH

The monoclinic modification of terbium oxide hydroxide, TbOOH, was prepared using hydrothermal technique. The crystal structure was investigated by three-dimensional single-crystal X-ray analysis and was refined to a conventional R-value of 8.1%. The space group is $\text{P2}{}_1\text{m}$, No. 11, with a = 6.04 Å, b = 3.69 Å, c = 4.33 Å, and β = 109.0°. The terbium atom is seven coordinated with oxygen atoms, and the structure is not hydrogen bonded.The compound is antiferromagnetic with a Néel temperature of 10°K. Neutron diffraction powder patterns were measured at 300°K and 4.2°K. The magnetic super lattice reflections were indexed on the basis of a monoclinic unit cell with the dimensions a_M = 2a, b_M = b, c_M = c, and β_M = β, where a, b, c, and β are the dimensions of the chemical unit cell. The structure contains two independent magnetic atoms. A nonclinear antiferromagnetic arrangement of the spins describes the magnetic structure. The spin at one atom has an angle of 43° with the ac plane and the projection of the spin on the ac plane has an angle of 59° with the a axis. The spin on the other atom has an angle of ?43° with the ac plane, the projection having the same angle of 59° with the a axis.     

Semiempirical calculations on triplet and doublet states

Restricted open-shell SCF calculations are carried out on triplet states of electron systems and doublet states of some of their ions. The results are compared with the ones obtained by limited configuration interaction and by the use of Koopman's theorem. For some examples open-shell SCF wavefunctions are expanded into linear combinations of Slater determinants representing configurations built from closed-shell SCF orbitals. This allows a more detailed comparison of the different methods of calculation.

---

Zusammenfassung Berechnungen nach der beschränkten SCF Methode für offene Schalen werden an Triplettzuständen von -Elektronensystemen und Dublettzuständen einiger ihrer Ionen ausgeführt. Die Resultate werden mit denjenigen verglichen, welche die beschränkte Konfigurationswechselwirkung und der Satz von Koopmans liefern. Die SCF Wellenfunktionen für offene Schalen werden, für gewisse Beispiele, in Linearkombinationen von Slater-Determinanten entwickelt, welche aus SCF Orbitalen für geschlossene Schalen aufgebaut sind und verschiedene Konfigurationen darstellen. Dies erlaubt einen eingehenderen Vergleich der verschiedenen Berechnungsmethoden.

---

Résumé Des calculs selon la méthode SCF avec restriction pour les couches ouvertes sont effectués sur les états triplets de systèmes d'électrons et sur les états doublets de certains de leurs ions. Les résultats sont comparés à ceux obtenus par la méthode d'interáction de configurations limitée et par l'emploi du théorème de Koopmans. Pour certains exemples les fonctions SCF à couches ouvertes sont développées en combinaison linéaire de déterminants de Slater représentant des configurations bâties à partir d'orbitales S.C.F. de couches fermées. Cela permet une comparaison plus détaillée des différentes méthodes de calcul.

---

---

Presented in parts at the Theoretical Chemistry Symposium in Vienna, March 1967.     

Calcul théorique des énergies de divers arrangements géométriques de la molécule (η5-C5H5)2TiCl2

The molecular energy of the complex (η⁵-C₅H₅)₂TiCl₂ has been calculated for experimental geometry and for several hypothetical forms by a semi-empirical CNDO/2 approach. The energy difference between experimental (quasi-tetrahedral) geometry and a planar geometry is ca. 20 kcal mol^?1. This difference is sufficiently high to explain the difficulty of the inversion process.     

Intramolecular "Aryl-metal chelate ring" pi,pi-interactions as structural evidence for metalloaromaticity in (aromatic alpha,alpha'-diimine)-copper(II) chelates: molecular and crystal structure of aqua(1,10-phenanthroline)(2-benzylmalonato)copper(II) three-hydrate

By reaction of Cu(2)CO(3)(OH)(2), 2-benzylmalonic acid (H(2)Bzmal), and 1,10-phenanthroline (phen), [Cu(Bzmal)(phen)(H(2)O)] x 3H(2)O (compound 1) has been obtained and characterized by thermal, spectral, magnetic, and X-ray diffraction methods. The molecular structure of 1 is remarkably similar to that of [Cu(Bzmal)(bipy)(H(2)O)] x 2H(2)O (compound 2, bipy = 2,2'-bipyridine). In both complexes, the aryl(Bzmal) ring produces an unexpected pi,pi-stacking interaction with the Cu(II)-(aromatic alpha,alpha'-diimine) chelate ring, at an average distance d(pi)(-)(pi) of 3.40 A, involving roughly parallel and smoothly slipped rings. This insight is discussed as new structural evidence for metalloaromaticity of Cu(II)-(aromatic alpha,alpha'-diimine) chelate rings. Interestingly, 1 recognizes itself by a weak intermolecular pi,pi-stacking interaction between aryl(Bzmal) ligands to give pairs of complex molecules. In contrast, there is an intermolecular pyridyl-pyridyl pi,pi-stacking interaction also forming pairs of complex molecules in 2.     

Protonation et hydrolyse d'enamine. Epimerisation des immoniums intermediaires

At pH 5 (AcOHAcONa) protonation of the enamine of 3,6,6-trimethylnorpinane 2-one (3-methylnopinone) yields the cis immonium ion 6 (X  OAc), which isomerizes to the thermodynamically more stable trans immonium ion 6′ (X  OAc). Under more strongly acid conditions (aqueous hydrochloric or perchloric acids), the enamonium salts 7 (X  Cl or ClO₄) are formed; these isomerize, with a rate increasing with decreasing acidity to the cis immonium salts 6, stable under these conditions. Epimerization of the cis salt 6 (X  Cl), occurs in ethereal hydrogen chloride, the rate increasing also with decreasing acidity. At pH 5, hydrolysis of the enamine yields 3-methylnopinone, the proportion of the less thermodynamically stable trans isomer increasing with a rise in reaction temperature.     

Spektrophotometrische Bestimmung von L-Askorbinsäure mit 2,2',5,5'-Tetra-(4-nitrophenyl)-3,3'-(3,3'-dimethoxy-4, 4'-biphenyl)-ditetrazoliumchlorid (TNBT)

Zusammenfassung Die Optimalbedingungen für die spektrophotometrische Bestimmung der L-Askorbinsäure mit TNBT wurden ermittelt. Die L-As-korbinsäure wurde in Anwesenheit eines 100fachen Überschusses folgender Stoffe bestimmt: Glukose, Fruktose, Saccharose, Wein-, Zitronen-, Oxal-, Äpfel- und Bernsteinsäure. 0,5g/ml ist die minimale Askorbinsäurekonzentration, die sich bestimmen läßt. Die rel. Standardabweichung beträgt 2,1%, der rel. Fehler 0,875%.

---

Spectrophotometric assay of L. ascorbic acid with 2,2,5,5-tetra-(4-nitro-phenyl)-3, 3-(3,3-dimethoxy-4,4-biphenyl)-ditetrazolium chloride (TNBT)

Summary The optimal conditions for spectrophotometric assay of L-ascorbic acid with TNBT were determined. L-ascorbic acid was assayed in the presence of a 100 fold excess of the following substances: glucose, fructose, sucrose, tartaric acid, citric acid, oxalic acid, malic acid and succinic acid. 0.5g/ml is the minimum concentration of ascorbic acid which can be assayed. The relative standard deviation is 2.1%, the relative error 0.875%.

     

Anomalous behaviour of the Landé factors and the chemical shift close to the dissociation limit of the B state of molecular iodine

Resonances in a modulated light beam have been observed on five transitions in the visible band system of I₂. Landé factors g_J and chemical shifts g₁ have been measured for levels very close to the dissociation limit of the B state.     

Determination of the pH of binary mobile phases for reversed-phase liquid chromatography

The measurement of pH in chromatographic mobile phases has been a constant subject of discussion during many years. The pH of the mobile phase is an important parameter that determines the chromatographic retention of many analytes with acid-base properties. In many instances a proper pH measurement is needed to assure the accuracy of retention-pH relationships or the reproducibility of chromatographic procedures. Three different methods are common in pH measurement of mobile phases: measurement of pH in the aqueous buffer before addition of the organic modifier, measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with standard solutions prepared in the same mobile phase solvent, and measurement of pH in the mobile phase prepared by mixing aqueous buffer and organic modifier after pH calibration with aqueous standard solutions. This review discusses the different pH measurement and calibration procedures in terms of the theoretical and operational definitions of the different pH scales that can be applied to water-organic solvent mixtures. The advantages and disadvantages of each procedure are also presented through chromatographic examples. Finally, practical recommendations to select the most appropriate pH measurement procedure for particular chromatographic problems are given.     

Anwendung mikroanalytischer Methoden zur Lösung kunst- und kulturgeschichtlicher Probleme

Zusammenfassung Mit bekannten mikroanalytischen Arbeitsmethoden — Oberflächenreaktionen, Abstrichuntersuchungen mit dem Korundstäbchen, Schutzschichtreaktionen sowie dem Abdruckverfahren — lassen sich archaeometrische Probleme einer Lösung näherbringen. Die Art der Korrosion kupferhaltiger Oberflächen wurde diskutiert.

---

Application of microanalytical methods to the solution of artistic- and cultural historical problems

Summary Archeometrical problems are brought closer to a solution by means of known microanalytical procedures-surface reactions, surface scraping studies with the corundum rod, protective layer reactions as well as the imprint method. A discussion of the corrosion of copper-bearing surfaces is included.

---

---

Vortrag anläßlich der Tagung Chemische Analysen — Kunst- und Kulturwissenschaften im Reiß-Museum in Mannheim, 19.–21. September 1974.     

Cyclobut-2-enones from Alkynes via Dichlorocyclobut-2-enones

The [2 + 2]-cycloaddition of dichloroketene (prepared in situ from CCl₃COCl and Zn(Cu)) with three alkynes 1a–c to form 2,3-dimethyl-( 2a ), 2,3-diethyl-( 2b ) and 3-butyl-4,4-dichlorocyclobut-2-enone ( 2c ) proceeds rapidly in the absence of POCl₃. The primary products 2a–c rearrange in situ to the 2,4-dichlorocyclobut-2-enones 3a–c under the influence of ZnCL₂ produced during the reaction. ZnCl₂ converts both 2a and 3a into a 4:6 equilibrium mixture of the two; this isomerization does not occur with LiCl. The Cl-atoms of both 2a , b and 3a , b and of 2c may reductively be removed with Zn(Cu) in AcOH/pyridine to afford the alkylcyclobutenones 4a-c . Without pyridine, this reduction gives ca. 1:1 mixtures of the double-bond isomers 4 and 5 in low yields. The cyclobutenones 2c and 4c may be deuterated by CD₃COOD in the presence of pyridine. D -Atom is introduced into 2c at C(4) and at C(γ), and into 4c at C(2) and C(4). A mechanism for this deuteration is considered, which does not involve a cyclobutadienolate 7 , but rather a cyclobutenolate of type 8 . The reductions of 2 and 3 to 4 might also pass through the same type of intermediate 8 .