The electrocapillarity of polyacrylates

Summary The electrocapillary properties of polyacrylic acid have been studied by two methods. Exploratory measurements have been made of the effect of the polymer on the differential capacity of a mercury drop in 0.1 m sodium perchlorate. They showed that the polymer was strongly adsorbed over a wide range of potentials but that it did not appear to form a monolayer. The surface excess of polymer obtained from drop weight data showed a maximum at very low concentrations and then a decline at higher concentrations. The bulk of the work was carried out by making surface tension measurements, using a sessile mercury drop, in solutions of a fraction of polyacrylic acid (mol. wt. 7.02×10⁴) in potassium chloride at 0.01, 0.1, 0.2, and 0.5 m at 25°C.The data have been used to evaluate the surface excesses of the polymer and of the inorganic ions. The distribution of K⁺ and Cl^– in the electrical double layer and the contact adsorption of Cl^– on the mercury were very little affected by the presence of the polymer. The surface excess of polymer was always found to be greatest at low concentrations, to decrease steeply at first as the concentration was increased and then to decrease more slowly at higher concentrations.Possible explanations of this behaviour are discussed and it is concluded that the rapid decrease is a consequence of molecular weight dispersion and the stronger adsorption of high molecular weight polymer. The slow decrease in surface excess at higher concentrations may be a result of configurational changes of the polymer molecules.Surface pressure data show that, despite this decrease in the surface excess, the surface coverage reaches a high level at very low polymer concentrations and then continues to increase slowly as the concentration of polymer is increased. This apparent contradiction is due to changes in configuration of the adsorbed polymer molecules. At higher bulk concentrations the chain configurations are more compact and each adsorbed molecule makes more contacts with and so occupies a greater area of the mercury surface than at low concentrations.The conclusion is reached that the surface excess of polymer is mostly contained in a layer probably more than 1000 Å thick. It consists of a concentrated and entangled mass of polymer chains. Relatively few of these chains are in contact with the mercury at any istant. The concentration in this surface layer decreases steadily with increasing distance from the mercury surface and it merges without discontinuity into the bulk solution.With 10 figures in 22 details     

Stereochemie von Metallocenen, 40. Mitt.

Starting from optically active methylferrocene-- and--carboxylic acids (1 a and1 b) of known absolute configuration and enantiomeric purity about 15 chiral ferrocenes (of each isomeric series— and ) were obtained by suitable ligand transformations. Thereby (almost) all possible chiral combinations of the ligands CH₃, COOH (COO^–), COOCH₃, CN and NH₂ (NH₃ ⁺) were accessible which are necessary for a potential test of approximations of chirality functions for compounds with basic symmetry C_5v. The chiroptical properties of these disubstituted ferrocenes are recorded.Preliminary tests using a shortened Ansatz revealed large discrepancies between calculated () and found [M]_D-values. Possible reasons for this failure are discussed.

---

---

61. Mitt. über Ferrocenderivate

---

39. Mitt.:A. Meyer, H. Neudeck undK. Schlögl, Chem. Ber.110, 1403 (1977).

---

60. Mitt.:V. Rapi, K. Schlögl undB. Steinitz, J. Organometal. Chem.94, 87 (1975).     

Neue Wege der Analytik durch Kombination der direkten quantitativen Dünnschicht-Chromatographie mit elektronischer Datenverarbeitung

A computer program for direct evaluation of thin-layer chromatograms, which already was described earlier [3] has been tested with a laboratory and some technical formulations of a pesticide. Results have been compared with those obtained by two conventional methods. Mean relative standard deviation calculated from results compiled by electronic data processing (method A) is about 6%, compared to 10% received by graphic method (method C) which is employed by most investigators. In addition, overall time of analysis is 34% higher if graphic method is used. Method A saves time and expense especially in routine analysis because working of the process is easier and may be performed even by assistent personal. The proposed method is suitable for the determination of different active ingredients and impurities even in difficult technical products.     

Asymmetry and magnetism in bis(oximato)-bridged heterobimetallic compounds: a computational approach

A density functional study of exchange coupling was carried out for a series of heterobinuclear oximato-bridged transition metal complexes. Model calculations were used to examine the influence of the electronic configuration of the metal atoms on the coupling constants. This analysis was complemented by a study of the variation of the coupling constant with the most usual structural distortions within this family of compounds. The influence of the nature of the terminal ligands as well as that of the symmetry on the bridge were also investigated.     

PPP-Berechnungen und Vergleich der Elektronenspektren von iso-π-elektronischen Sauerstoff-, Stickstoff-, Schwefel- und Selenheterocyclen

Zusammenfassung 42 Heterocyclen, die sich formal von alternierenden und nichtalternierenden Kohlenwasserstoffen durch Ersatz einer Doppelbindung durch die Heteroatome Sauerstoff, Stickstoff, Schwefel und Selen ableiten, werden nach dem Pariser-Parr-Pople-Verfahren berechnet und ihre Spektren im nahen Ultraviolett und Sichtbaren beschrieben. Schwefel und Selen werden dabei im LCAO-MO-Verfahren nach dem p-Modell behandelt. In den meisten Fällen können die Berechnungen nicht nur die spektralen Charakteristika gut wiedergeben, sondern auch Beziehungen in den Spektren iso--elektronischer Verbindungen gleicher Struktur verständlich machen. Berechnungen an kationischen Stickstoffheterocyclen führten dann zu falschen Ergebnissen, wenn die Stickstoffparameter vom Pyrroltyp übernommen werden.

---

PPP-calculations and comparison of electronic spectra of iso--electronic oxygen, nitrogen, sulfur, and selenium heterocycles

42 heterocyclic compounds, formally derived from alternant or nonalternant hydrocarbons by replacing a C=C group by an oxygen, nitrogen, sulfur or selenium atom, are studied by the Pariser-Parr-Pople-type of calculation. By means of these results the near ultraviolet and visible spectra are described. The sulfur and the selenium atoms are treated in the LCAO-MO-method using the p-model. In most cases spectral features are not only well reproduced, but interrelations of the spectra of iso--electronic compounds, possessing analogous structures are interpreted, too. On calculating cationic nitrogen heterocycles using parameters of pyrrol type nitrogen results are unsatisfactory.

---

Résumé 42 composés hétérocycliques, formellement dérivés d'hydrocarbures alternants ou non alternants par remplacement d'un groupement C=C par un atome d'oxygène, d'azote, de soufre ou de sélénium, sont étudiés par la méthode de Pariser-Parr-Pople. Les résultats obtenus permettent de décrire le spectre U.V. proche et visible. Soufre et sélénium sont traités en utilisant le modèle p. Dans la plupart des cas les caractères spectraux sont non seulement correctement reproduits, mais les relations entre les spectres des composés iso--électroniques à structures analogues peuvent être interprétées. Les calculs concernant les heterocycles à azote cationique sont insatisfaisants lorsqu'ils sont effectués avec des paramètres de l'azote du type pyrrole.

---

---

Anmerkung: Die Arbeit wurde in dem von Prof. Dr. R. Mayer geleiteten Schwefelarbeitskreis der TU Dresden durchgeführt.     

Zur Kenntnis von Natrium-hexafluoromanganat(III)

Sodium hexafluoromanganate(III) has been synthesized by heating equimolecular quantities of Na₂MnF₅ and NaF in argon atmosphere. The compound is monoclinic witha=5.56 (1) Å,b=5.84 (1) Å,c=8.10 (2) Å, =90.7 (2) andZ=2. It is a high spin complex with _eff and the deformation of the octahedra is evident from its IR-spectra. Two enantiotropic transitions (at 562 and 653°C) and the melting point at 800°C have been observed.

---

---

8. Mitt.: Mh. Chem.106, 483 (1975).     

Discussion on the method for the measurement of the flexural modulus of coupled materials and reasons of the shifts of theQ −1 maxima caused by coupling

Summary When measuringQ ^–1 and the flexural resonance frequency of bars clamped at one end, constituted by a viscoelastic polymeric material glued to a rigid support of modulusE ₁, it is possible to calculate the componentsE ₂ andE ₂ of the complex elastic modulus of the polymeric material examined. In this work the minimum (critical) value of the ratioa=E ₂ /E ₁=a _c and the values of the ratioQ ₂ ^–1/Q ^–1=F ₁ are evaluated beyond which no exact calculation ofE ₂ and ofQ ₂ ^–1 is possible.Within the confidence limits of the linear viscoelasticity theory, these values depend on the accuracy of measurement of both frequency and resonance curve, as well as on the instrument employed, on the operating temperature and on the ratio between the thicknesses of the two coupled materials.In order to keep outside the critical conditions, the most convenient method involves the use of measurements of coupled test-pieces having different ratiosz between their thicknesses and of supports having different modulusE ₁, depending on the field of temperature of the analysis ofE ₂ and tg ₂ concerning and E.P.R. elastomer and a vulcanized cis-1,4 polyisoprene in very wide ranges of temperature comprising the glass transition. Moreover, it is demonstrated by analysis the shift on the temperature axis of the tg maximum of the composite test-piece with respect to the position of the tg maximum of the polymeric material alone.With 11 figures and 1 table