Metrological role of neutron activation analysis. IB. Inherent characteristics of relative INAA as a primary ratio method of measurement

This is the second part of a paper which deals with the advantages and disadvantages of relative instrumental neutron activation analysis concerning traceability and uncertainty, and the current scope and possible future extensions of neutron activation analysis as a primary ratio method. The first part of this paper has been published in this Journal [1]. Received: 19 March 2001 Accepted: 2 October 2001     

Diffusion characteristics of a T-type microchannel with different configurations and inlet angles.

A series of symmetrical and asymmetrical microfluidic T-sensors with different inlet angles were fabricated to study the mixing characteristics of a T-type microstructure for generating concentration gradient. Computational fluid dynamics (CFD) simulations showed that the concentration gradient, transition zone and diffusion length were different for various configurations and inlet angles. Quick mix and sharp concentration gradient occurred in the asymmetrical structure with large inlet angle. The observed concentration gradients in the fabricated microchannel were consistent with the theoretical prediction. In this microstructure, stagnant zone and z-direction diffusion also affected the concentration gradient. Based on the simulation results, the microfluidic structure was optimized to generate desired concentration gradient for a cell-based study.     

喷雾热解法合成球形(Y,Gd)BO3:Eu荧光粉的研究

采用喷雾热解法合成了无团聚的球形(Y,Gd)BO3∶Eu荧光粉。研究了各因素对(Y,Gd)BO3∶Eu荧光粉体的结晶性能、外观形貌及发光强度的影响。结果表明,按120%硼酸的化学计量比于900℃喷雾热解,再经过1200℃后处理2 h,可以合成结晶良好的(Y,Gd)BO3∶Eu荧光粉体;喷雾热解溶液的浓度和载气流量对荧光粉的外观形貌影响较大;铕含量为10%时可以获得最佳的发光强度。在优化喷雾热解实验条件下成功合成出良好发光强度的PDP用(Y0.6Gd0.3)BO3∶Eu0.1荧光粉。     

Chemical thermodynamics

The curing of composition containing epoxy bond is complicated chemical and technological process where under temperature and pressure conditions a change of its structure occurs. The structure changes are possible to know by thermal methods as DSC, DTA, etc. and also by measurement of dielectrical response under the low frequency electrical field.     

High-efficiency, environment-friendly electroluminescent polymers with stable high work function metal as a cathode: green- and yellow-emitting conjugated polyfluorene polyelectrolytes and their neutral precursors

A series of aminoalkyl-substituted polyfluorene copolymers with benzothiadiazole (BTDZ) of different content were synthesized by Suzuki coupling reaction, and their quaternized ammonium polyelectrolyte derivatives were obtained through a postpolymerization treatment on the terminal amino groups. Copolymers are soluble in environmentally friendlier solvents, such as alcohols. It was found that the efficient energy transfer occurs by exciton trapping on the narrow band gap BTDZ site under UV illumination. Only 1% of BTDZ content is needed to completely quench a fluorene emission for both the neutral and the quaternized copolymers in the neat film. Absolute PL efficiencies of copolymer films were greatly enhanced as a result of the suppression of excimer formation. Light-emitting devices fabricated from these copolymers show high external quantum efficiencies over 3% and 1% for the neutral precursor and the quaternized copolymers, respectively, with high work function metals such as Al as a cathode. To the best of our knowledge, this is the first report on an electroluminescent polymer which bears the high EL efficiency, the electron-injection ability from high work function metals, and the solubility in environment-friendly solvents at the same time. These features make them a promising candidate for the next generation of light-emitting copolymers in PLED flat panel display application.     

Isolation and Structural Characterization of Di‐ and Tetra‐protonated Forms of the Macrocyclic Hexaamine trans‐6,13‐Dimethyl‐1,4,8‐11‐tetraazacyclodecane‐6,13‐diamine

Cations derived by protonation of the ligand title compound (L¹) have been structurally characterized in their di‐ and tetra‐ protonated forms in the salts [H₂L¹][ClO₄]₂·2H₂O and [H₄L¹][ZnCl₄]₂·4H₂O. In both structures, one half of the formula unit comprises the asymmetric unit of the structure, the macrocycle being centrosymmetric, with the two macrocycles adopting similar conformations. In both salts, a pair of diagonally opposed macrocyclic secondary amine groups are protonated; in the [H₄L¹]⁴⁺ salt, the additional pair of protons are accommodated on the exocyclic pendant amine groups. The dispositions of the pendent amines differ between the two structures, being ‘equatorial’ with respect to the macrocyclic ring in the [H₂L¹]²⁺ salt, and ‘axial’ in the [H₄L¹]⁴⁺ salt. In other structurally characterized compounds containing [H₄L¹]⁴⁺ the equatorial disposition was found in the ferricyanide adduct, while in the tetraperchlorate salt the axial disposition was identified. The differences in disposition of the exocyclic groups are ascribed to the extensive H‐bonding in the lattices.     

Separation of salidroside from Rhodiola crenulata by high-speed counter-current chromatography

High-speed counter-current chromatography (HSCCC) was used to purify salidroside from an extract of Rhodiola crenulata with two steps using a two-phase solvent system composed of ethyl acetate-n-butanol-water (1:4:5, v/v) in the first run and chloroform-methanol-isopropanol-water (5:6:1:4) in the second run. The method yielded 21.9 mg of salidroside from 1.216 g of the crude sample at 98% purity determined by HPLC analyses. Identification was performed by 1H NMR, 13C NMR, and MS.     

甲醇、乙醇、异丁醇对含水卵磷脂液晶结构影响的SAXS研究

本文报导采用小角X射线散射方法(SAXS)对甲醇、乙醇和异丁醇分别与含水卵磷脂所形成的液晶相结构的研究. 它们与水-卵磷脂形成的液品结构有较大区别. 在水-卵磷脂体系中, 随着含水量增加, 双分子层层间距增大. 但当醇类加入水-卵磷脂体系中, 随着醇类含量增加, 层间距变小, 随着醇类中碳链的增长, 支链的引入, 层间距变小趋势强化。     

Hydroxylation of nigranoic acid to 6β-hydroxynigranoic acid by Caryospora carllicarpa YMF1.01026

Microbial transformation of nigranoic acid by Caryospora carllicarpa YMF1.01026 afforded the new derivative 6β-hydro-xynigranoic acid. Its structure was elucidated by spectroscopic methods.