Reaction of carboxamide with Cu2Oisonitrile complex; formation of a new chelated copper(I) complex

Reaction of carboxamides with Cu₂O in the presence of t-butyl isocyanide gave new chelated copper(I) complexes, which probably are formed by the insertion of t-butyl isocyanide into the coppernitrogen bond of copper(I) amide isonitrile complexes, which were initially produced from the carboxamides and Cu₂Ot-butyl isocyanide complex. The same chelated copper(I) complexes were prepared more readily by the reaction of the corresponding N-trimethylsilyl-carboxamides with Cu₂Ot-butyl isocyanide complex. Reactions of the copper(I) complexes thus obtained with alkylating agents, such as alkyl halides, alkyl tosylates and triethyloxonium tetrafluoroborate, also were described.     

Das Schwingungsspektrum von Magnesium-orthovanadat

The infrared and laser-Raman spectra of crystalline Mg₃(VO₄)₂ are reported and a factor group analysis for the full lattice is presented to support the discussion. The 1,000 to 600 cm^?1 region of the spectrum is essentially related to internal (stretching) modes of the greatly distorted VO₄ tetrahedra, whereas the bands in the low frequency region must be assigned to complex vibrations originating in the interaction of the bending vibrations of the tetrahedral groups with the external modes.     

Das dielektrische Verhalten von Polyäthern zwischen Mikrowellen- und Infrarot-Gebiet

Zusammenfassung Es wurde die Absorption und Dispersion verschiedener Polyäther im Mikrowellengebiet und im fernen IR untersucht. Mit wachsender Sauerstoffzahl in der Kette werden die Torsions- und Biegeschwingungen wachsend IR-aktiv. Ihre Frequenzlagen ändern sich mit dem zunehmend polaren Charakter der Struktur. Die Analogie zwischen der Verschiebung der Schwingungsfrequenzen und dem Verlauf der Schmelztemperaturen wird diskutiert.Mit zunehmend polarem Charakter steigen der Temperaturkoeffizient der Molpolarisation und die Differenz (–n ²) der Dielektrizitätskonstanten im Mikrowellengebiet und im optischen Bereich stark an. Ein Vergleich mit der Höhe der Dispersionsstufen im fernen IR und deren Temperaturabhängigkeit ergab, daß diese zusätzliche Polarisation nicht allein durch die IR-aktiven Banden bedingt ist. Sie muß gekoppelt sein mit dem ebenfalls stark anwachsenden Untergrundverlust im gesamten mm- und sub-mm-Gebiet.

---

Summary Absorption and dispersion of several polyethers were measured in the microwave region and in the far infrared. The torsional vibrations become increasingly iractive with increasing number of oxygens in the chain. Their frequencies shift, too, in a manner analogues to the variation of the melting temperatures.The temperature coefficient of the mol polarization at 32 GHz and the difference (–n ²) between microwave and optical dielectric constant rise rapidly with increasing polar character of the structure. It was tried to correlate (–n ²) with the overall absorption of the skeletal vibrations. Height and temperature dependence of the far ir dispersion show, however, that the larger part of this additional polarization cannot be accounted for by the resonance absorption bands. It must be correlated with the background loss which extends over the whole mm and sub-mm range and also increases rapidly with increasingly polar structure.

---

---

Mit 10 Abbildungen in 14 Einzeldarstellungen und 2 Tabellen     

Swelling effect onα-relaxation in high density polyethylene

Summary Swelling effects of carbon tetrachloride on the mechanical relaxations in the crystal mat and the melt-crystallized samples of high density polyethylene were studied using a torsion pendulum. A very strong-relaxation peak appears by swelling at the low temperature side of the original-relaxation for the crystal mat. It was shown that this strong-relaxation originates from the slippage between the highly swollen lamellae. For the melt-crystallized sample, the-relaxation peak is decreased by swelling, but its temperature is unchanged. This behavior suggests that the-relaxation in the melt-crystallized sample originates mainly from deformation process of intermosaic block region. The swelling effect on-relaxation was also discussed.

---

Zusammenfassung Quellungseffekte von Tetrachlorkohlenstoff auf das mechanische Relaxationsverhalten in Einkristall-Matten und schmelzkristallisierten Proben von linearem Polyäthylen wurden mit den Torsionspendeln untersucht. Ein sehr starkes-Maximum tritt durch die Quellung bei tieferen Temperaturen als der der-Relaxation in den nicht gequollenen Einkristall-Matten auf. Es wird gezeigt, daß diese starke-Relaxation auf das Gleiten der ausreichend gequollenen Lamellen zurückzuführen ist. Bei schmelzkristallisierten Proben wird das-Maximum durch die Quellung erniedrigt, seine Temperaturlage wird jedoch nicht verändert. Dies zeigt, daß die-Relaxation in der schmelzkristallisierten Probe hauptsäcblich auf Deformations-Prozessen in den Blöcken beruht. Auch die Quellungseffekte auf die-Relaxationen wurden diskutiert.

     

Orbital correlation effects: The independent pair-potential approximation with application to the ground state and first ionized state of boron hydride

A new method is proposed for calculating correlation effects in atomic and molecular systems. The basis of the method is the formulation of a set of partial configuration expansions which yield directly variational orbital correlation corrections which are appropriately summed in order to obtain an estimate of the total correlation energy. This method is applied to the ground state of boron hydride and its cation at the equilibrium distance of BH. The results of the method are compared in detail with independent electron pair results and second order CI results. It is further shown that multiple substitutions are approximately accounted for in this method and the extent to which they are included is compared with other approximations. Finally, three methods of increasing accuracy, aimed at reducing the necessary computational effort, are given for determining the vertical ionization potential. The most economical method yields an IP of 9.70 eV or 0.03 eV less than the experimental IP. Completion of the basis is estimated to improve this value to 9.77 eV.     

Formation and Crystal Structure of [(F5TeOXe)+·SO2ClF][Sb(OTeF5)6-]

Xe(OTeF₅)₂ reacts with Sb(OTeF₅)₃ under the formation of [Xe₂(OTeF₅)₃]⁺[Sb(OTeF₅)₆]^-. From SO₂ClF solution a yellow solvate [F₅TeOXe]⁺·SO₂ClF· [Sb(OTeF₅)₆]^- is formed with the crystal data: a = 1028.1(1), b = 1040.9(1), c = 1780.2(3) pm, α = 98.07(1), β = 97.68(1), γ = 105.82(1)°, space group . The O-Xe···O fragment is essentially linear (176.1(2)°), and the two Xe-O distances are quite different 197.1(4) and 242.6(4) pm.     

The electronic structures and spectra of proflavine,acridine orange,and their DNA complexes

The electronic structure of the proflavine cation is studied by the SCF –ASMO –CI method using the Pariser–Parr–Pople approximations. It is shown that the band at 445 mμ may be assigned to the ¹A₁ → ¹B₁, transition polarized along the long axis of the molecule. The bands in the neighbourhood of 260 mμ, which are composed of three absorption bands, are tentatively assigned to the ¹A₁ → ¹B₁, ¹A₁ → ¹B₁, and ¹A₁ → ¹A₁ transitions, respectively, in order of decreasing wavelength. The spectrum of the acridine orange cation may be understood to have the same assignment as that of the proflavine cation. The acridine dye cations are well known for their dimerization with concentration. The intermolecular distances in these dimers are estimated from the band shifts due to the formation of dimers, using the exciton theory. The main contribution to the molecular interaction is shown to be the electrostatic dipole–dipole interaction. Since the first excitation band of the dye molecule which exhibits a remarkable change due to the formation of the DNA–acridine dye complex, is suggested to be polarized along the long axis, preference of the outside stacking or the intercalation model is qualitatively discussed from the spectral shift of the acridine dye bound to the DNA, assuming simple models.     

An indirect flame emission spectrometry method for the determination of traces of sulphur. I

Summary An accurate and simple indirect method of flame emission spectrometric determination of small quantities of elemental sulphur is described. The method is based on the reduction of elemental sulphur by means of sodium borohydride and oxidation of the resulting boron-sulphur compounds to sulphate by means of hydrogen peroxide. The determinations can be carried out in the presence of methanol, acetone, dimethylformamide, toluene and benzene. The detection limit of the reported method is 1 ppm of sulphur.

---

Indirekte etnissionsspektroskopische Bestimmungsmethode für Spuren elementaren Schwefels. I.

Zusammenfassung Eine genaue und einfache, indirekte, emissionsspektroskopische Methode zur Bestimmung geringer Mengen elementaren Schwefels wurde ausgearbeitet. Sie besteht in der Reduktion des elementaren Schwefels mit Hilfe von Natriumborhydrid und in der Oxydation der entstehenden Bor-Schwefel-Verbindung zu Sulfat mit Hilfe von Wasserstoffperoxid. Die Analyse wurde in Methanol, Aceton, Dimethylformamid, Toluol und Benzol durchgeführt. Die Erfassungsgrenze beträgt 1 ppm Schwefel.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

The effect of the mechanical properties of the molecular network on the wool-water isotherm

Summary The present position of theoretical investigation of the water-content versus relative humidity isotherm is briefly indicated. Previous workers have anticipated an effect on equilibrium water-content arising from the mechanical properties of the keratin network. Such an effect is reported for supercontracted wool fibres and for reduced and S-methylated fibres, for which an increased saturation water-content is observed. In the case of S-methyl wool, saturation water-content shows little or no dependence on the number of disulphide cross-links, however it does depend on the number of S-methyl groups present. The results are considered in terms ofFlory-Huggins solution theory, and it is indicated that this theory can be usefully applied for relative humidities in excess of 85%. In normal wool solution absorption is permitted only in the noncrystalline component, but in supercontracted wool or S-methyl wool takes place in both components. Even when saturation water-content is greatly increased the isotherm is not appreciably changed below 85% R. H., indicating that no additional sites for strong binding of water become available; apparently all such sites are accessible in normal wool at approximately 85% relative humidity.

---

Zusammenfassung Der gegenwärtige Stand theoretischer Untersuchungen für den isothermen Wassergehalt gegen relative Feuchtigkeit ist kurz kritisch dargelegt. Die bisherigen Bearbeiter haben einen Einfluß auf das Gleichgewicht des Wassergehaltes seitens der mechanischen Eigenschaften des Keratinnetzwerkes angenommen. Ein solcher Effekt wird für superkontrahierte Wollfasern und für solche, reduziert und mit Schwefelmethyl behandelt, mitgeteilt, für die eine erhöhte Wassersättigung zu beobachten ist. Im Fall der schwefelmethylierten Wolle zeigt die Sättigung geringe oder keine Abhängigkeit von der Zahl der Disulfidvernetzungen, sie hängt jedoch von der Zahl der Schwefel-Methylgruppen ab. Diese Resultate werden mit derFlory-Huggins-Lösungstheorie betrachtet, und es zeigt sich, daß diese Theorie gut für relative Feuchtigkeiten größer als 85% angewendet werden kann. In normaler Wolle ist Lösungsabsorption nur in den nichtkristallinen Anteilen möglich, aber in superkontrahierter oder schwefelmethylierter Wolle findet sie auch in den Kristalliten statt. Auch wenn der Sättigungswert der Isotherme gegen Ende stark beeinflußt wird, ändert sich der Verlauf der Isotherme unterhalb 85% r. F. nicht. Das zeigt, daß kerne zusätzlichen Plätze für starke Wasserbindungen entstehen. Offensichtlich sind alle diese Plätze in normaler Wolle bei etwa 85% r. F. zugänglich.