[Fe4S4Cl4—n（S2CNEt2）n]^2—（n=0,1,2,4）：原子簇的电子结构研究

用CNDO/2(s,p,d)方法研究了类立方烷系列Fe-S簇合物[Fe_4S_4Cl_4(?)(S_2CNEt_2)_n]~(2-)(n=0,1,2,4)的电子结构。得出[S_2CN(Et)_2]-螯合配位Fe_4S_4~(2+)簇合物中存在两类不同价态铁原子的结论;骨架Fe_4S_4~(2+)中μ_3-S电子是非定域化的,同Mssbauer谱测定结果一致。讨论了簇合物Fe—Fe之间的成键作用、螫合配体的作用和氧化还原性质。     

Polycyclic aromatic hydrocarbons in Ya-Er Lake (Hubei, China): sources and distribution

Sources and distribution of polycyclic aromatic hydrocarbons (PAH) in the Ya-Er Lake area (Hubei, China) sediment cores of 3 ponds in the shallow Ya-Er Lake were investigated for 16 PAH. Analytical procedure included extraction by ultrasonication, clean-up by gel-permeation and quantification by HPLC with fluorescence detection. The total PAH amount in sediment samples of the Ya-Er Lake ranged from 68 to 2242 μg/kg. Concentrations decreased from pond 1 to pond 3 and from upper to lower sediment layers. In addition a soil sample from Ya-Er Lake area showed a total PAH amount of 58 μg/kg. The PAH pattern in lower sediment layers were similar to that of the soil sample which indicates an atmospheric deposition into the sediments prior to 1970 only. The PAH profile of upper sediment samples, which differs completely from that of lower layers, may be explained by a gradually increasing input of mixed combustion and raw fuel sources since 1970. Therefore the origin of increased PAH contamination in Ya-Er Lake during the last 3 decades has been probably an industrial waste effluent in pond 1.     

X射线荧光光谱法在稀土元素分析中的应用

本文研究了Ｘ射线荧光光谱在混合稀土氧化物和高纯稀土氧化物分析中的应用，并探讨了在常量分析中影响分析准确度和精密度的主要因素；样品及标样制备，基体效应校正方法在痕量分析中降低检测限的方法，选择最佳测量条件，降低背景，与分离富集手段相结合，取得满意的结果。     

Microcalorimetric investigation of the growth of the <Emphasis Type="Italic">Escherichia coli</Emphasis> DH5α in different antibiotics

The effects of Amoxicillin Sodium and Cefuroxime Sodium on the growth of E. coli DH5α were investigated by microcalorimetry. The metabolic power-time curves of E. coli DH5α growth were determined by using a TAM air isothermal microcalorimeter at 37°C. By evaluation of the obtained parameters, such as growth rate constants (k), inhibitory ratio (I), the maximum heat power (P _m) and the time of the maximum heat power (t _m), one found that the inhibitory activity of Amoxicillin Sodium vs. E. coli DH5α is enhanced with the increasing of the Amoxicillin Sodium concentration, and the Cefuroxime Sodium has a stimulatory effect on the E. coli DH5α growth when the concentration is about 1 μg mL⁻¹. The IC₅₀ for the Amoxicillin Sodium and the Cefuroxime Sodium are 1.6 and 2.0 μg mL⁻¹, respectively, it implicates that the E. coli DH5α is more sensitive to Amoxicillin Sodium than Cefuroxime Sodium.     

Synthesis and characterization of aniline and aniline-o-sulfonic acid copolymers

The copolymer of aniline (An) and aniline-o-sulfonic acid (AS) is synthesized by chemical oxidation polymerization. The effects of mole ratio of copolymerized monomers on chain structure, thermostability, conductivity, redox properties of copolymer are discussed. It is indicated that if more AS monomers in polymerization system the corresponding structure units will increase, but their relation isn’t linear. When An:AS = 1:1, the ratio of structure unit in copolymer is 9:1, and it is only 1:2 for copolymer with An:AS = 1:6. The measurements of conductivity and redox activity also prove that the properties of An-co-AS(1:1), (1:3), and (1:4) are similar to polyaniline due to more An units than AS. When An:AS is higher than 1:6, it shows out the properties of copolymer is similar to those of poly(aniline-o-sulfonic acid), and their redox route is different. They will transform to follow the route of LH ↔ EH ↔ P. The results of thermo-analysis indicate that the decomposition temperature of AS units is lower than An units because of the electron-withdrawing group substitution. The decomposition temperature of polymer is related to dopant and doping degree. Electron-withdrawing group, -SO₃H, substitution and HCl doping will decrease polymer chain decomposition temperature. The mechanism of copolymerization of An and AS is different from homopolymerization. The monomer with low oxidation potential forms free radical cation firstly, which transfers to monomer with higher oxidation potential and initiates its polymerization.     

Fundamental studies on the intermediate layer of a bipolar membrane: Part III. Effect of starburst dendrimer PAMAM on water dissociation at the interface of a bipolar membrane

Starburst dendrimer polyamidoamine (PAMAM) with ellipsoidal or spheroidal shape is structure-regular and has much more amino groups than conventional polymers. This paper investigates the possibility of these amino groups on water dissociation in a bipolar membrane interface. To do this, a bipolar membrane is prepared by casting the solution of sulfonated poly(phenylene oxide) (SPPO) in dimethyl formamide (DMF) on a commercial anion exchange membrane that is immersed in PAMAM aqueous solution in advance. The existence of PAMAM adsorbed on the membrane is proved by X-ray photoelectron spectroscopy (XPS), and the adsorption amount is evaluated by weighting method. The junction thickness of the prepared bipolar membrane is determined by electrochemical impedance spectroscopy (EIS), and the performance is evaluated by current–voltage curves. The experiments show that both the generation and concentration of PAMAM would strongly affect the characteristics of the bipolar membranes. There exists a transitional concentration for various generations PAMAMs to catalyze effectively the water dissociation, and above or below the transitional concentration the performance of bipolar membranes is decreasing. The higher the generation, the lower the concentration. Moreover, at a fixed solution concentration, there is not the simple relation of monotone decreasing or increasing between the performance of bipolar membranes and the generations of PAMAMs. All these can be explained according to the characteristics of PAMAMs combined with available water dissociation theory.     

表面活性剂对纤维素接枝共聚物溶液粘度性质的影响

研究了阴离子十二烷基硫酸钠(SDS)、阳离子十六烷基三甲基溴化铵(CTAB)和非离子聚乙二醇辛基苯基醚(OP)等三种不同类型的表面活性剂对疏水化水溶性两性纤维素接枝共聚物(CGAO)溶液粘度性质的影响.结果表明,在SDS和OP的临界胶束浓度(cmc)附近，CGAO溶液粘度最大，SDS引起CGAO粘度的变化大于OP；即使在CTAB的cmc附近，随着CTAB浓度的增加，CGAO的粘度一直呈下降趋势；非疏水改性的纤维素接枝共聚物的溶液粘度随SDS或CTAB浓度的增加而下降，但几乎不随OP浓度的增大而变化.此外，通过凝胶渗透色谱法测得的保留时间证实了SDS、CTAB和OP与CGAO之间的疏水缔合作用.     

褪黑激素受体拮抗剂的三维定量构效关系研究

采用两种分子场分析方法即比较分子场分析法（CoMFA）和比较分子相似因子分析法（CoMSIA）进行了37个褪黑激素受体拮抗剂的构效关系研究.计算结果表明，两种方法得到的构效关系模型都具有较好的预测能力.在计算中，还考察了不同格点距离和电荷计算方法对构效关系模型的影响.通过分析分子场等值面图在空间的分布，可以观察到叠合分子周围分子场特征对化合物活性的影响，为设计新的褪黑激素拮抗剂提供了一些理论依据.     

大型液相色谱分离过程FAD－SMT数学模型及其数值解

提出大型液相色谱分离过程ＦＡＤ－ＳＭＴ数学模型，把色谱分离连续性方程转变为对流扩散方程和常微分方程组，并提出模型的数值方法，分析了数值解的稳定条件和收敛条件以及空间和时间步长的选取。实验结果表明，ＦＡＤ－ＳＭＴ数学模型计算的液相色谱分离葡萄糖、果糖和分离甘露醇、山梨醇理论与实验流出曲线相吻合。灵敏度分析结果表明：相平衡常数比轴向扩散系数和总传质系数对色谱分离有较大的影响。     

利用差异衍生同步分析醛糖和酮糖

建立了一种可同时对醛、酮糖进行精确定性和定量分析的方法。以肌醇作为内标，用80％乙醇超声提取，利用醋酸酐和HMDS＋TMCS（1：3）进行差异衍生，在EI源下用SIM模式进行GC／MS分析。结果表明：11种标准单糖在1—4mg／L范围内线性良好；仪器检出限：醛糖在8．15—22．4μg／L之间；酮糖为2．32μg／L和3．47μg/L；高、中、低3个量的平均回收率在73．0％-95．7％，相对标准偏差在3．1％-10．0％。对枸杞游离单糖进行测定，各单糖含量分别在0．26—368．6mg／g。该方法弥补了以前单糖分析中的缺陷，对既含有醛糖又含有酮糖的样品可同时进行精确的定性定量分析。