Metallchelate mit Acetophenon-Benzoylhydrazon und Acetophenon-Salicoylhydrazon

The stoichiometry and structure of acetophenone benzoylhydrazone and acetophenone salicoylhydrazone chelates with some divalent metal ions are studied by conductometric titration and visible and infra-red absorption spectrophotometry. The results are supported by analysis of the solid complexes. The infra-red study revealed that coordination occurs through C=O and C=N groups. The shift in the C=O and C=N bands is utilised for the determination of bond lengths.     

Kinetic studies on the foam separation of thorium (IV) with sodium lauryl sulphate

Summary The effects of pH, gas flow rate and collector concentration on the rate of thorium removal by foaming with sodium lauryl sulphate have been investigated. The obtained data indicate that only aged hydrated thorium oxide is removed by a flotation mechanism. All the other colloidal and condensed thorium species as well as the colloidal sublates which are formed between the dissolved thorium species and the collector anions appear to be removed by partition and their removal rates could be described by a reversible first-order rate equation. The obtained results are discussed in terms of thorium hydrolysis.

---

Zusammenfassung Der Einfluß der pH-Werte, Gasdurchflußmengen und Kollektor-Konzentration auf die Geschwindigkeit der Entfernung des Thoriums durch Schaumbildung mit Natrium-Lauryl-Sulfat wurde untersucht. Die Ergebnisse zeigen, daß das gealterte, wässerige Thoriumoxid durch Flotations-Mechanismen entfernt wird. Die anderen kolloidalen und kondensierten Thorium-Spezien und auch die Kolloidalprodukte, die durch Reaktionen zwischen den gelösten Thoriumspezien und den Kollektor-Anionen formiert sind, sind durch die Verteilung entfernt worden. Die Entfernungsgeschwindigkeit kann beschrieben werden durch eine reversible 1. Ordnungs-Gleichung. Die Ergebnisse werden in Abhängigkeit einer ThoriumHydrolyse diskutiert.

---

---

With 7 figures     

Zur Kenntnis der thermischen Zersetzung von Ammoniumhexafluoroscandat,-titanat,-vanadat und-chromat

Thermal analysis supported by kinetic calculations was applied exhaustively to these compounds. Under dynamic conditions, tetrafluorometallates(III), which as intermediates, could not be isolated, for the first three compounds. In each case, the final step was the pure metal(III) fluoride. Ammonium hexafluorochromate(III) decomposed directly to the pure chromium(III) fluoride. The decomposition rate of all compounds slowed down towards the end, probably for kinetic reasons. Polymorphic transitions of ammonium hexafluorotitanate(III) were observed at 35 and 100°C. Ammoniumhexafluoroscandate(III) underwent polymorphic transition at 47°C. The decomposition patterns for all these compounds were similar. Conditions for the preparation of pure ammonium tetrafluorometallates(III) of Sc, Ti and V are described.     

PAMAM Dendrimers as Anchors for the Preparation of Electrocatalytically Active Ultrathin Metallic Films

This paper describes the formation of catalytically active thin films of Pt, Pt/Au, and Pt/Ru on gold substrates stabilized by amine‐terminated polyamidoamine (PAMAM) dendrimers. A monolayer of dendrimer is initially self‐assembled on the gold substrate, which serves as a template for the growth of catalytically active thin films. As dendrimers contain tens to hundreds of functional groups at the periphery, the aggregate strength of the multidentate interactions with the gold substrate leads to the formation of robust films. The films were found to exhibit high catalytic activity for the oxidation of small hydrocarbons such as methanol. Such films offer versatility and scope for the design of effective electrocatalysts, especially in the context of microfuel cells and “dendrichips”; hence, they could find applications in the fields of sensors, fuel cells, and waste‐water treatment.     

Untersuchungen zur 3-Phononenabsorption in partiell kristallinen Polymeren

Zusammenfassung In dieser Arbeit wird die Dreiphononenabsorption in Polymeren, die den Hauptanteil an den dielektrischen Verlusten im Millimeterwellengebiet stellt, theoretisch und experimentell untersucht. Aus der Störungsrechnung bis zur 2. Ordnung wird die Temperaturabhängigkeit der Absorption abgeschätzt. Damit ist eine befriedigende Deutung des gesamten Temperaturverlaufs der dielektrischen Verlust-Kurven möglich. Im Hochtemperaturbereich läßt sich die Mehrphononenabsorption eindeutig gegenüber restlichen Relaxationsprozessen abgrenzen. Im Tieftemperaturgebiet konnte erstmals auch für das Millimeterwellengebiet ein temperaturunabhängiger Bestandteil fehlordnungsinduzierter Einphononenabsorption nachgewiesen werden. Im Übergangsbereich durchlaufen die Absorptionskurven einen Wendepunkt bei einer charakteristischen TemperaturT ₀, die dem Schwerpunkt der am Absorptionsprozeß beteiligten Phononenfrequenzen entspricht. Daraus konnten in Übereinstimmung mit dem Experiment die Frequenzen der niedrigsten optisch aktiven Phononen für die verschiedenen Polymeren abgeschätzt werden.

---

Summary The 3-phonon absorption in polymers, which gives the main contribution to their dielectric loss in the microwave region, is theoretically and experimentally investigated. Perturbation theory up to the second order is used for the evaluation of its temperature dependence. The theoretical results allow an interpretation of the total absorption-temperature-curves: In the high temperature region 3-phonon absorption can be distinguished from residual relaxation losses (above the glass temperature). In the low temperature region the existence of a low frequency tail of temperature independent disorderinduced one-phonon absorption became evident. At intermediate temperatures (50–150°K) the curves show an inflexion point or plateau at a characteristic temperatureT ₀, which according toT ₀= ⁰, corresponds to the frequencies of those phonons, that mainly contribute to the multiphonon absorption. The plateau gives, in good agreement with the experiment, the frequencies of the lowest optically active phonons in the various polymers.

---

---

Mit 6 Abbildungen in 8 Einzeldarstellungen

---

Vorgetragen auf der Arbeitssitzung des Fachausschusses Physik der Hochpolymeren in der Frühjahrstagung 1970 des Regionalverbandes Hessen-Mittelrhein-Saar der Deutschen Physikalischen Gesellschaft in Darmstadt, 10.–13. März 1970.     

Structure des savons alcalins

Summary This is a systematic X-ray diffraction study of the structure of the mesomorphic phases occurring with potassium soaps ranging from C₈ to C₂₂.Four types of structure have been identified. The first is lamellar with both polar groups and paraffin chains in the crystalline state. The second is also lamellar, but with both polar groups and paraffin chains in the liquid state. The third corresponds to the localization of indefinitely long ribbons on a two-dimensional oblique lattice; polar groups are crystalline and paraffin chains desorganized. The fourth corresponds to the localization of discs on a three-dimensionnalB-faces centered orthorhombic lattice; polar groups are crystalline and paraffin chains disorganized.The structural parameters and the polymorphism of the polar groups have been discussed.

---

Zusammenfassung Wir beschreiben hier eine systematische Röntgenstrahlendiffraktionsforschung der Struktur der mesomorphen Phasen von Kalium Seifen von C₈ bis C₂₂.Vier Strukturtypen wurden gefunden. Die erste Struktur ist lamellar; beides, die polaren Gruppen und die Paraffinketten sind kristallisiert. Die zweite Struktur ist auch lamellar; aber in diesem Falle sind beides, die polaren Gruppen und Paraffinketten geschmolzen. Die dritte Struktur entspricht einer Lokalisation von Seifenbändern in einem zweidimensionalen monoklinen Gitter; die polaren Gruppen sind kristallisiert und die Paraffinketten geschmolzen. Die vierte Struktur entspricht einer Lokalisation von Seifenscheiben in einemB-flächenzentrierten orthorhombischen Raumgitter; die Polargruppen sind kristallisiert und die Paraffinketten geschmolzen.Wir haben aus den experimentellen Resultaten einige Schlußfolgerungen gezogen.

     

Solid state extrusion of thermoplastic elastomers 4

A solid state extrusion technique is applied as to produce oriented block copoly(ether ester) under various physical conditions. The morphology of the extruded samples is characterized in relation to the extrusion parameters and hard segment compositions of the polymer, using thermal analysis and X-ray methods. The lateral dimensions of the crystalline domains are found to be approximately 150 Å depending on the extrusion conditions. The statistics of the long range periodicity of the structure along the extrusion direction is in agreement with a one-dimensional two phase model, the crystalline portion of which does not vary much in thickness (35 – 45 Å). The unexpected increase in the long period and the thermal shrinkage suggest the existence of strained interlamellar amorphous chains (tie molecules). The observed variations in tensile properties are interpreted under the assumption that both the number of such tie molecules and their fully extended lengths are determined by the hard segment composition and the extrusion conditions. It is also argued that the increase in the glass transition temperature is not only a function of the composition of hard segments in the amorphous phase but also of the number of strained tie molecules.Herrn Dr. Dr. h. c. H. Hellmann zum 70. Geburtstag gewidmet.Part 3 cf. lit [11]     

Synthesis of all of the four possible stereoisomers of pestalotin,a gibberellin synergist isolated from pestalotia cryptomeriaecola sawada

(-)-Pestalotin [(6S, l'S)-6-(1'-hydroxypentyl)-4-methoxy-5,6-d dihydro-2-pyrone 1a]and its three other stereoisomers were synthesized either by utilizing the Sharpless asymmetric epoxidation as the keystep or by derivation from D-(+)-glyceraldehyde acetonide.     

Dampfdruck- und Leitfähigkeitsuntersuchungen der Ionensolvatation in Amiden

The solvating properties of formamide, N-methylformamide, dimethylformamide, N-ethylformamide and diethylformamide have been investigated by means of vapour pressure and conductivity measurements. For the salts and ions, resp. average solvation numbers have been calculated from vapour pressure data and limiting ionic conductances. The solvation numbers are used for a discussion of the influence of N-substituents on the solvating properties of the amides.

---

---

Mit 2 Abbildungen