Beiträge zur chemie der Pyrrolpigmente, 10. Mitt.: Elektronenspektrometrische Untersuchungen über die Struktur von Quadratsäurederivaten

The structure of squaric acid derivatives was investigated on the basis of the PPP—SCF—LCAO—MO—CI method utilizing the π-electron densities and bond orders. The parameters used in the calculations were modified to fit the experimental data for representative compounds. The data were obtained by X-ray photoelectron spectrometry and electron absorption spectroscopy (including the polarization of the bands as determined by liquid crystal induced circular dichroism measurements).     

Thermische Polymerisation von Acenaphthylen

Zusammenfassung Acenaphthylen wurde durch Anpolymerisation und zweifache Hochvakuumsublimation gereinigt. Die Reinigungsmethode wird ausführlich beschrieben.Bei verschiedenen Temperaturen wurde mit einer dilatometrischen Methode die thermische Bruttogeschwindigkeit gemessen. Zwischen 95 und 105 °C giltk _br=7,0₈·10¹⁰ exp (– 30,9 kcal/RT).Die beträchtliche Aktivierungsenergie der Bruttoreaktion ist sowohl auf eine große Aktivierungsenergie der thermischen Startreaktion als auch auf eine relativ hohe Wachstumsaktivierungsenergie zurückzuführen.Das Polymerisationsverhalten von Acenaphthylen kann vermutlich aufgrund seiner sterischen Eigenschaften erklärt werden.

---

Summary Acenaphthylene was purified by partial polymerisation, followed by double stage high vacuum sublimation. The method of purification is described in detail.The thermal overall rate was measured at different temperatures by a dilatometric method. Between 95 and 105 °C the following relation holds:k _th=7,0₈ · 10¹⁰ exp (– 30,9 kcal/RT).The considerable energy of activation of the overall reaction depends on a relatively high energy of activation of both the thermal initiation and the propagation reaction.It is supposed, that the polymerisation behaviour of acenaphthylene depends mainly on its steric properties.

     

Das Schwingungsspektrum von Magnesium-orthovanadat

The infrared and laser-Raman spectra of crystalline Mg₃(VO₄)₂ are reported and a factor group analysis for the full lattice is presented to support the discussion. The 1,000 to 600 cm^?1 region of the spectrum is essentially related to internal (stretching) modes of the greatly distorted VO₄ tetrahedra, whereas the bands in the low frequency region must be assigned to complex vibrations originating in the interaction of the bending vibrations of the tetrahedral groups with the external modes.     

Das dielektrische Verhalten von Polyäthern zwischen Mikrowellen- und Infrarot-Gebiet

Zusammenfassung Es wurde die Absorption und Dispersion verschiedener Polyäther im Mikrowellengebiet und im fernen IR untersucht. Mit wachsender Sauerstoffzahl in der Kette werden die Torsions- und Biegeschwingungen wachsend IR-aktiv. Ihre Frequenzlagen ändern sich mit dem zunehmend polaren Charakter der Struktur. Die Analogie zwischen der Verschiebung der Schwingungsfrequenzen und dem Verlauf der Schmelztemperaturen wird diskutiert.Mit zunehmend polarem Charakter steigen der Temperaturkoeffizient der Molpolarisation und die Differenz (–n ²) der Dielektrizitätskonstanten im Mikrowellengebiet und im optischen Bereich stark an. Ein Vergleich mit der Höhe der Dispersionsstufen im fernen IR und deren Temperaturabhängigkeit ergab, daß diese zusätzliche Polarisation nicht allein durch die IR-aktiven Banden bedingt ist. Sie muß gekoppelt sein mit dem ebenfalls stark anwachsenden Untergrundverlust im gesamten mm- und sub-mm-Gebiet.

---

Summary Absorption and dispersion of several polyethers were measured in the microwave region and in the far infrared. The torsional vibrations become increasingly iractive with increasing number of oxygens in the chain. Their frequencies shift, too, in a manner analogues to the variation of the melting temperatures.The temperature coefficient of the mol polarization at 32 GHz and the difference (–n ²) between microwave and optical dielectric constant rise rapidly with increasing polar character of the structure. It was tried to correlate (–n ²) with the overall absorption of the skeletal vibrations. Height and temperature dependence of the far ir dispersion show, however, that the larger part of this additional polarization cannot be accounted for by the resonance absorption bands. It must be correlated with the background loss which extends over the whole mm and sub-mm range and also increases rapidly with increasingly polar structure.

---

---

Mit 10 Abbildungen in 14 Einzeldarstellungen und 2 Tabellen     

Swelling effect onα-relaxation in high density polyethylene

Summary Swelling effects of carbon tetrachloride on the mechanical relaxations in the crystal mat and the melt-crystallized samples of high density polyethylene were studied using a torsion pendulum. A very strong-relaxation peak appears by swelling at the low temperature side of the original-relaxation for the crystal mat. It was shown that this strong-relaxation originates from the slippage between the highly swollen lamellae. For the melt-crystallized sample, the-relaxation peak is decreased by swelling, but its temperature is unchanged. This behavior suggests that the-relaxation in the melt-crystallized sample originates mainly from deformation process of intermosaic block region. The swelling effect on-relaxation was also discussed.

---

Zusammenfassung Quellungseffekte von Tetrachlorkohlenstoff auf das mechanische Relaxationsverhalten in Einkristall-Matten und schmelzkristallisierten Proben von linearem Polyäthylen wurden mit den Torsionspendeln untersucht. Ein sehr starkes-Maximum tritt durch die Quellung bei tieferen Temperaturen als der der-Relaxation in den nicht gequollenen Einkristall-Matten auf. Es wird gezeigt, daß diese starke-Relaxation auf das Gleiten der ausreichend gequollenen Lamellen zurückzuführen ist. Bei schmelzkristallisierten Proben wird das-Maximum durch die Quellung erniedrigt, seine Temperaturlage wird jedoch nicht verändert. Dies zeigt, daß die-Relaxation in der schmelzkristallisierten Probe hauptsäcblich auf Deformations-Prozessen in den Blöcken beruht. Auch die Quellungseffekte auf die-Relaxationen wurden diskutiert.

     

Orbital correlation effects: The independent pair-potential approximation with application to the ground state and first ionized state of boron hydride

A new method is proposed for calculating correlation effects in atomic and molecular systems. The basis of the method is the formulation of a set of partial configuration expansions which yield directly variational orbital correlation corrections which are appropriately summed in order to obtain an estimate of the total correlation energy. This method is applied to the ground state of boron hydride and its cation at the equilibrium distance of BH. The results of the method are compared in detail with independent electron pair results and second order CI results. It is further shown that multiple substitutions are approximately accounted for in this method and the extent to which they are included is compared with other approximations. Finally, three methods of increasing accuracy, aimed at reducing the necessary computational effort, are given for determining the vertical ionization potential. The most economical method yields an IP of 9.70 eV or 0.03 eV less than the experimental IP. Completion of the basis is estimated to improve this value to 9.77 eV.     

Quantitative analysis of small pharmaceutical drugs using a high repetition rate laser matrix-assisted laser/desorption ionization source

In this work, a high repetition rate laser matrix-assisted laser desorption/ionization (MALDI) source is studied on a quadrupole-time-of-flight (QqTOF) and a triple quadrupole (QqQ) mass spectrometer for rapid quantification of small pharmaceutical drugs. The high repetition rate laser allows an up to 100-fold higher pulse frequency as compared with regular MALDI lasers, resulting in much larger sample throughput and number of accumulated spectra. This increases the reproducibility of signal intensities considerably, with average values being around 5% relative standard deviation after taking into account the area ratio of the analyte to an internal standard. Experiments were conducted in MS/MS mode to circumvent the large chemical background due to MALDI matrix ions in the low mass range. The dynamic range of calibration curves on the QqTOF mass spectrometer extended over at least two orders of magnitude, whereas on the QqQ it extended over at least three orders of magnitude. Detection limits ranged from 60-400 pg/microL on the QqTOF and from 6-70 pg/microL on the QqQ for a series of benzodiazepines. The benzodiazepine content of commercial pill formulations was quantified, and less than 5% error was obtained between the present method and the manufacturer's certified values. Furthermore, a high sample throughput was achieved with this method, so that a single MALDI spot could be quantitatively scanned in as little as 15 s, and an entire 96-well MALDI plate in 24 min.     

Formation and Crystal Structure of [(F5TeOXe)+·SO2ClF][Sb(OTeF5)6-]

Xe(OTeF₅)₂ reacts with Sb(OTeF₅)₃ under the formation of [Xe₂(OTeF₅)₃]⁺[Sb(OTeF₅)₆]^-. From SO₂ClF solution a yellow solvate [F₅TeOXe]⁺·SO₂ClF· [Sb(OTeF₅)₆]^- is formed with the crystal data: a = 1028.1(1), b = 1040.9(1), c = 1780.2(3) pm, α = 98.07(1), β = 97.68(1), γ = 105.82(1)°, space group . The O-Xe···O fragment is essentially linear (176.1(2)°), and the two Xe-O distances are quite different 197.1(4) and 242.6(4) pm.     

An indirect flame emission spectrometry method for the determination of traces of sulphur. I

Summary An accurate and simple indirect method of flame emission spectrometric determination of small quantities of elemental sulphur is described. The method is based on the reduction of elemental sulphur by means of sodium borohydride and oxidation of the resulting boron-sulphur compounds to sulphate by means of hydrogen peroxide. The determinations can be carried out in the presence of methanol, acetone, dimethylformamide, toluene and benzene. The detection limit of the reported method is 1 ppm of sulphur.

---

Indirekte etnissionsspektroskopische Bestimmungsmethode für Spuren elementaren Schwefels. I.

Zusammenfassung Eine genaue und einfache, indirekte, emissionsspektroskopische Methode zur Bestimmung geringer Mengen elementaren Schwefels wurde ausgearbeitet. Sie besteht in der Reduktion des elementaren Schwefels mit Hilfe von Natriumborhydrid und in der Oxydation der entstehenden Bor-Schwefel-Verbindung zu Sulfat mit Hilfe von Wasserstoffperoxid. Die Analyse wurde in Methanol, Aceton, Dimethylformamid, Toluol und Benzol durchgeführt. Die Erfassungsgrenze beträgt 1 ppm Schwefel.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.