Spektrophotometrische Bestimmung von L-Askorbinsäure mit 2,2',5,5'-Tetra-(4-nitrophenyl)-3,3'-(3,3'-dimethoxy-4, 4'-biphenyl)-ditetrazoliumchlorid (TNBT)

Zusammenfassung Die Optimalbedingungen für die spektrophotometrische Bestimmung der L-Askorbinsäure mit TNBT wurden ermittelt. Die L-As-korbinsäure wurde in Anwesenheit eines 100fachen Überschusses folgender Stoffe bestimmt: Glukose, Fruktose, Saccharose, Wein-, Zitronen-, Oxal-, Äpfel- und Bernsteinsäure. 0,5g/ml ist die minimale Askorbinsäurekonzentration, die sich bestimmen läßt. Die rel. Standardabweichung beträgt 2,1%, der rel. Fehler 0,875%.

---

Spectrophotometric assay of L. ascorbic acid with 2,2,5,5-tetra-(4-nitro-phenyl)-3, 3-(3,3-dimethoxy-4,4-biphenyl)-ditetrazolium chloride (TNBT)

Summary The optimal conditions for spectrophotometric assay of L-ascorbic acid with TNBT were determined. L-ascorbic acid was assayed in the presence of a 100 fold excess of the following substances: glucose, fructose, sucrose, tartaric acid, citric acid, oxalic acid, malic acid and succinic acid. 0.5g/ml is the minimum concentration of ascorbic acid which can be assayed. The relative standard deviation is 2.1%, the relative error 0.875%.

     

Die Bedeutung der kritischen Micellkonzentration bei der Elektrosorptionsanalyse von Aniontensiden mit der Wechselstrompolarographie

Zusammenfassung Bei der Elektrosorptionsanalyse verschiedener Aniontenside in Gegenwart von Grundelektrolytkonzentrationen ( 0,1 m NaCl) wurde festgestellt, daß auf der Grundlage von Wechselstrom-Potential (IE-E)-Kurven die kritischen Micellkonzentrationen bestimmt werden können. Die CMC-Werte ergaben sich aus Diskontinuitäten in der Konzentrationsabhängigkeit von Höhe und Scheitelpotential der wechselstrompolarogräphischen Desorptionsmaxima. Der unterschiedliche Einfluß von Alkylkettenlänge, polaren Gruppen und Stellungsisomerie auf die wechselstrompolarographischen Desorptionscharakteristika wurde untersucht. Aus den Meßergebnissen resultierten für den Zustand der Adsorptionsschichten oberhalb der CMC an der Grenzfläche Quecksilber/Elektrolyt in Abhängigkeit von der Alkylkettenlänge prinzipiell zwei Möglichkeiten. Wenn oberhalb der CMC mit zunehmender Aniontensidkonzentration höchstens geringe Änderungen. des Desorptionspeaks auftreten, bleibt der Zustand der Adsorptionsschicht unverändert. Die Entstehung neuer Desorptionspeaks und starke Diskontinuitäten in Lage und Höhe bereits vorhandener Desorptionspeaks wird dagegen durch zusätzliche Grenzflächenassoziation erklärt. Ein überzeugender Hinweis auf niedere Assoziationen (Dimerisation) im prämicellaren Bereich folgte aus einer zusätzlichen Diskontinuität, die bei geradkettigen Alkylverbindungen (R 12) auftritt.

---

Summary Using the electrosorption analysis of different anionic surfactants in the presence of supporting electrolyte concentrations ( 0,1 m NaCl) we found that the critical micelle concentrations can by determined on the basis of alternating current-potential (IE-E)-curves. The CMC values resulted from discontinuities in the concentration dependence of height and summit potential of alternating current polarographic desorption maxima. We investigated the different influences of the alkyl chain length, of the polar groups, and of the positions of SO₄Na in isomeric alkyl sulfates upon the alternating current polarographic desorption characteristics.Experimental dates show that, dependent on the alkyl chain length two possibilities exist for the state of the adsorption layers above the CMC at the interface mercury/electrolyte. 1) The state of adsorption layer remains unchanged if above the CMC no or only small changes of desorption peaks are observed. 2) The formation of new desorption peaks and strong discontinuities of position and height of the desorption peaks already existing is rationalized by additional association at the interface. We assume that an additional discontinuity which occurs with straight chain alkyl compounds (R 12) results from association (dimerisation) in the premicellar range.

---

---

Mit 7 Abbildungen und 2 Tabellen     

Anwendung mikroanalytischer Methoden zur Lösung kunst- und kulturgeschichtlicher Probleme

Zusammenfassung Mit bekannten mikroanalytischen Arbeitsmethoden — Oberflächenreaktionen, Abstrichuntersuchungen mit dem Korundstäbchen, Schutzschichtreaktionen sowie dem Abdruckverfahren — lassen sich archaeometrische Probleme einer Lösung näherbringen. Die Art der Korrosion kupferhaltiger Oberflächen wurde diskutiert.

---

Application of microanalytical methods to the solution of artistic- and cultural historical problems

Summary Archeometrical problems are brought closer to a solution by means of known microanalytical procedures-surface reactions, surface scraping studies with the corundum rod, protective layer reactions as well as the imprint method. A discussion of the corrosion of copper-bearing surfaces is included.

---

---

Vortrag anläßlich der Tagung Chemische Analysen — Kunst- und Kulturwissenschaften im Reiß-Museum in Mannheim, 19.–21. September 1974.     

Sorption of water vapor by poly(vinyl acetate)

Summary The sorption property of water vapor by poly(vinyl acetate) (PVAc) of relatively low glass transition temperature (T _g) was studied at temperatures nearT _g.Tc_g of humidity-controlled samples of various moisture contents was measured and its variation with the moisture content was determined.T _g of the dry sample was estimated by dilatometry and DSC methods, and to confirm the value, the temperature dependence of mutual diffusion coefficient of the system of water vapor + PVAc was determined. A difference between the sorption mechanisms of water vapor by PVAc at 20 and 30 °C was observed: two sorption mechanisms are involved at 30 °C, while three mechanisms at 20 °C are involved which include the above two and another intermediate one. In earlier stage of sorption, at both 20 and 30 °C, water molecules sorbed by PVAc showed a tendency towards aggregation, while a mixing effect was found at higher stage of the sorption.

---

Zusammenfassung In der Arbeit werden Wasserdampfsorptionseigenschaften von Polyvinylacetat mit relativ niedriger Glastemperatur (T _g) in der Nähe vonT _g untersucht. Es wurden Plastizitätseinflüsse und Veränderungen vonT _g mit dem Wassergehalt studiert. Es wurde gefunden, daß bei 30 °C ein 2-Stufen-Sorptionsmechanismus, bei 20 °C ein 3-Stufen-Mechanismus existiert.

---

---

With 7 figures     

The surface activity of the lower homologues of n-alkylammonium chlorides in aqueous solutions. Effect of hydrophobic hydration

Summary The surface tensions of aqueous solutions ofn-alkylammonium chlorides (methyl to hexyl) have been measured at 25 °C. With methylammonium chloride the surface tension increased with concentration, whereas with ethylammonium chloride and higher homologues, the surface tension decreased with concentration. The results suggest that this transition is attributed to the effect of hydrophobic hydration. For propylammonium chloride and higher homologues, the relation between the surface tension lowering da and the concentrationC in the range of 0–10 dyne/cm, can be expressed by the equation; = AC + BC, whereA andB are constants. The surface tension coefficientB has been found to increase approximately twofold for each additional CH₂ group of alkyl chain.

---

Zusammenfassung Es wurden die Oberflächenspannungen wäßriger Lösungen vonn-Alkylammoniumchloriden (Methyl- bis Hexylammoniumchloride) bei 25 °C gemessen. Für Methylammoniumchlorid nimmt die Oberflächenspannung mit der Konzentration zu, aber bei allen höheren Homologen mit der Konzentration ab. Die Ergebnisse deuten darauf hin, daß dieser Übergang durch die hydrophobe Hydration bedingt wird. Für Propylammonium-chlorid und die höheren Homologen wird die Beziehung zwischen der Erniedrigung der Oberflächenspannung und der KonzentrationC in dem Bereich von 1 bis 10 dyn/cm durch die folgende Gleichung ausgedrückt: = AC + BC (A undB sind Konstanten). Es wurde gefunden, daß B für jede zusätzliche CH₂-Gruppe etwa um den Faktor 2 größer wird.

     

Hole and Electron Doping of the 4d Transition-Metal Oxyhydride LaSr3NiRuO4H4

Hole or electron doping of phases prepared by topochemical reactions (e.g. anion deintercalation or anion-exchange) is extremely challenging as these low-temperature conversion reactions are typically very sensitive to the electron counts of precursor phases. Herein we report the successful hole and electron doping of the transition-metal oxyhydride LaSr₃NiRuO₄H₄ by first preparing precursors in the range La_xSr_4−xNiRuO₈ 0.5<x<1.4 and then converting into the corresponding La_xSr_4−xNiRuO₄H₄ phases. This is particularly noteworthy as the (Ni/Ru)H₂ sheets in the La_xSr_4−xNiRuO₄H₄ phases are structurally analogous to the CuO₂ sheets in cuprate superconductors and hole doping (Ni^1+/2+, Ru²⁺) or electron doping (Ni²⁺, Ru^1+/2+) yields materials with partial occupancy in Ni/Ru –H 1s bands which are analogous to the partially occupied Cu –O 2p bands present in the CuO₂ sheets of doped superconducting cuprates.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

Proton Relaxometry of Long-Lived Spin Order

A study of long-lived spin order in chlorothiophene carboxylates at both high and low magnetic fields is presented. Careful sample preparation (removal of dissolved oxygen in solution, chelating of paramagnetic impurities, reduction of convection) allows one to obtain very long-lived singlet order of the two coupled protons in chlorothiophene derivatives, having lifetimes of about 130 s in D₂O and 240 s in deuterated methanol, which are much longer than the T₁-relaxation times (18 and 30 s, respectively, at a field =9.4 T). In protonated solvents the relaxation times become shorter, but the lifetime is still substantially longer than . In addition, long-lived coherences are shown to have lifetimes as long as 30 s. Thiophene derivatives can be used as molecular tags to study slow transport, slow dynamics and slow chemical processes, as has been shown in recent years.     

Darstellung und Reaktionen des 3-Ethinyl-2,4-diformyl-pentandials

Preparation and physical and chemical properties of 3-ethinyl-2,4-diformyl-pentandial (3 a) and its salts are described.3 a contains 2 malonaldehyde groups. Starting from3 a, 4H-pyranes, 4H-dihydropyridines, dipyrazoles, diisoxazoles, bisdiazepines and vinamidine derivates are obtained.

---

---

Mit 1 Abbildung     

Zur Umsetzung des 3,4,5,6-Tetrahydro-6-hydroxy-4,4,6-trimethyl-1,3-thiazin-2-thions mit sekundären Aminen

Tetrahydro-6-hydroxy-trimethyl-1,3-thiazine-2-thione (1) reacts with secondary amines via the dialkylammonium-3-oxoalkyldithiocarbamate3, either via isothiocyanates6 to 4-dialkylaminodihydro-2(1H)-pyridinethiones7 or to dialkylammonium dithiocarbamates (13), depending on the amine used and the reaction conditions. Subsequently, 6-dialkylaminotetrahydro-1,3-thiazine-2-thiones11 or tetrahydro-6-mercapto-1,3-thiazine-2-thione10 are formed. On being heated to reflux,11 reacts to pyridinethione7 and 4-dialkylaminodihydrothiopyranthione19. With secondary amines only13 is formed from tetrahydro-6-hydroxytetramethyl-1,3-thiazine-2-thione20. The reaction of dihydrotrimethyl-1,3-thiazine-2-thione21 with secondary amines leads to N,N-dialkylthioureas16 or dialkylammonium thiocyanates17 and with dialkylformamides 4-dialkylaminodihydropyridinethiones7 are formed. Dihydrotetramethyl-1,3-thiazine-2-thione24 reacts neither with secondary amines nor with dialkylformamides.