Aspects of the transpiration model for aerofoil design

Transpiration is a technique in which extra non-physical normal flows are created on an aerofoil surface in order to form a new streamline pattern such that the surface streamlines no longer follow the aerofoil surface under inviscid flow. The transpiration model is an important technique adopted in aerofoil design either to avoid mesh regeneration when aerofoil profile co-ordinates are adjusted or to find shape corrections in inverse design methods. A first-order approximation (with respect to the normal streamline displacement) to the transpiration model is commonly adopted; it is shown that this can be a poor approximation especially in regions of high curvature. In this paper more accurate approximations are developed to address this problem and improve the accuracy.     

Trace pollutants analysis in soil by a time-resolved laser-induced breakdown spectroscopy technique

The results of a joint experiment of IFAM-Pisa and ENEA-Frascati for the detection of traces of pollutants in soil by a time-resolved laser-induced spectroscopy technique are reported. Using samples of soil with known pollutants' concentration [Geochemical Exploration Reference (GXR) silicate from US Geological Survey], we were able to estimate the sensitivity of this Laser-Induced Breakdown Spectroscopy (LIBS) technique to be of the order of some parts per million for a vast class of metallic pollutants, including extremely dangerous soil pollutants such as copper, lead and chromium.ENEA guest with HC&M fellowship     

Intravascular and Intracellular Hepatic Relaxivities of Superparamagnetic Particles: An Isolated and Perfused Organ Pharmacokinetics Study

The relative contributions of intravascular and intracellular compartments to the proton transverse relaxation of the isolated and excised rat liver were determined during the phagocytosis of superparamagnetic particles. The evolution of the proton transverse magnetization of the organ perfused with increasing doses of starch-coated magnetic microspheres was followed up using a Carr–Purcell–Meiboom–Gill sequence with various echo times. From the multiexponential fit of the echo train, the amplitudes and the relaxation ratesR₂of the liver tissue were obtained. The results clearly indicate that shortly after contrast medium administration, an internalization takes place which can be followed by the rapid and biphasic evolution of the transverse relaxation rate of the water protons. A very fast decaying component looking like an initial loss of the magnetization is observed together with an increase of the relaxation rate of the remaining water tissue. This regime is strongly dependent on both the echo time and the iron concentration, a behavior characteristic of the agglomeration of magnetic particles. The examination of the liver tissues by electron microscopy shows that this clustering arises in cytoplasmic vacuoles.     

Elastic incoherent neutron scattering studies on glass forming hydrogen-bonded systems

Neutron incoherent elastic scattering data have been collected on homologues disaccharides (trehalose, maltose, sucrose)/H₂O mixtures as a function of temperature. The results show a dynamical transition at T238 K, T235 K and T233 K for trehalose, maltose and sucrose/H₂O mixtures, respectively, marking a cross-over in molecular fluctuations between harmonic and non-harmonic dynamical regimes, proving a higher ‘rigidity’ of trehalose mixture with respect to maltose and sucrose mixtures. This finding accounts for the higher cryptobiotic effectiveness of trehalose, namely a capability to encapsulate biostructures in a more rigid environment.     

Extended X-ray absorption fine structure studies of thulium doped GaN epilayers

The local structure of Tm³⁺ ions incorporated into GaN epilayers was studied by means of Extended X-ray Absorption Fine Structure. The samples were doped either in situ during growth by Molecular Beam Epitaxy or by ion implantation of layers grown by Metal Organic Chemical Vapour Deposition. The implantation was done at ion energy of 300 keV and different nominal fluences of 3×10¹⁵, 4×10¹⁵ cm⁻² and 5×10¹⁵ cm⁻². The concentration of Tm in the samples studied was measured by Wavelength Dispersive X-ray analysis. For the in situ doped sample with concentration of 0.5%, and for all of the implanted samples, Tm was found on the Ga site in GaN. The ion implanted sample and an in situ doped sample with a similar concentration of Tm showed the same local structure, which suggests that the lattice site occupied by Tm does not depend on the doping method. When the average Tm concentration for in situ doped samples is increased to 1.2% and 2.0%, Tm is found to occupy the Ga substitutional site and the presence of a substantial number of Tm ions in the second coordination sphere indicates dopant clustering in the films. The formation of pure TmN clusters was found in an in situ doped sample with a dopant concentration of 3.4%.     

Magnetic pole pinning at rectangular defects on MnAs/GaAs(0 0 1)

Strong magnetic poles at characteristic rectangular defects have been observed using a magnetic force microscope on a MnAs(  1 0 0) thin film with the thickness of 30 nm. The MnAs thin film was epitaxially grown on a GaAs(0 0 1) substrate. The magnetic poles were in one-arranging direction, being independent of the magnetization direction of the film. The poles were pinned at the edges of the rectangular defects until just below the Curie temperature, and formed a stable magnetic-field loop on the MnAs surface. The stability of the magnetic pole pinning shows the distinctive feature of the magnetic domain structure on the surface with a strong anisotropy, which was built in the heterostructure of MnAs and GaAs.     

Photoelastic stress freezing analysis of total shoulder replacement systems

Photoelastic stress freezing analyses in the orthopaedic literature have, in the past, been limited to studies where bone-on-bone, bone-on-metal or ultra-high molecular weight polyethylene (UHMWPE)-on-metal constructs are modeled. In these cases photoelastic plastics are used to simulate either bone or UHMWPE as it interacts with a metal implant. In joints such as the shoulder, a UHMWPE component is often cemented directly into the scapula's glenoid concavity using polymethylmethacrylate (PMMA). While a photoelastic material can be used to simulate bone with proper load scaling, UHMWPE and PMMA have very different mechanical properties at elevated stress freezing temperatures as compared within vivo body temperature. In this study, materials were identified such that proper scaling of elastic properties at elevated temperatures was utilized to simulate the metal-UHMWPE-PMMA-bone construct. Stresses on orthogonal planes throughout the glenoid were compared for two different UHMWPE component anchoring geometries (keeled and pegged). High stresses were found at the neck of the glenoid and also at the component-bone interface beneath simulated PMMA inclusions.     

Multicommuted fluorometric multiparameter sensor for simultaneous determination of naproxen and salicylic acid in biological fluids.

A combined approach based on solid-phase optosensing and multicommutation principles has been applied to develop a method for the simultaneous analysis of two pharmaceuticals (naproxen and salicylic acid) in biological fluids. The multicommuted flow-through optosensor was based on direct native fluorescence measurements of both analgesics using a non-polar sorbent (C18 silica gel) as a solid sensing zone. The flow system was controlled by Java-written home-made software and designed using three-way solenoid valves for an independent automated manipulation of sample and carrier solutions. Using an optimized sampling time, the method was calibrated in the range of 1 - 25 and 5 - 200 ng mL(-1). The obtained detection limits were 0.3 and 1.3 ng mL(-1) for naproxen and salicylic acid, respectively, with RSD (%) values of better than 2% for both analytes. The proposed methodology was successfully applied to urine, serum and pharmaceutical preparations. Recovery percentages ranging from 96.1 to 104% were obtained for both analytes.