Extension of the self-consistent spectrophotometric basicity scale in acetonitrile to a full span of 28 pKa units: unification of different basicity scales

The earlier compiled self-consistent spectrophotometric basicity scale in acetonitrile (AN) was expanded to range from 3.8 to 32.0 pK(a) units, that is 28 orders of magnitude. Altogether 54 new relative basicity measurements (DeltapK(a) measurements) were carried out and 37 new compounds were introduced to the scale (it now includes altogether 89 bases). The relative basicity of any two bases in the scale can be obtained by combining at least two independent sets of measurements. Multiple overlapping measurements make the results more reliable. The overall consistency (as defined earlier) of the measurements is s = 0.03 pK(a) units. Thorough analysis of all of our experimental data (DeltapK(a) values of this and earlier works) and experimental pK(a) data in AN available in the literature (works from the groups of Coetzee and Padmanabhan, Kolthoff and Chantooni, Jr., the Schwesinger group, Bren' et al. and some others, altogether 19 papers) was carried out. On the basis of this analysis the anchor point of the scale-pyridine-was shifted upward by 0.20 pK(a) units thereby also revising the absolute pK(a) values of all the bases on the scale. This way very good agreement between our relative data and the absolute pK(a) values of the abovementioned authors was obtained. The revised basicity scale was interconnected with the earlier published self-consistent acidity scale by DeltapK(a) measurements between acids and bases. The rms deviation between the directly measured DeltapK(a) values and the absolute pK(a) values of the compounds was 0.10 pK(a) units.     

Formation,preservation, and cleavage of the disulfide bond by vanadium

Reaction of the disulfide [HpicanS](2) (HpicanS is the carboxamide based on picolinate (pic) and o-mercaptoaniline (anS); the [] brackets are used to denote disulfides) with [VOCl(2)(thf)(2)] leads to reductive scission of the disulfide bond and formation of the mixed-valence (V(IV)/V(V)) complex anion [(OVpicanS)(2)mu-O](-) (1), with the dianionic ligand coordinating through the pyridine-N atom, the deprotonated amide-N atom, and thiophenolate-S atom. Reductive cleavage of the SbondS bond is also observed as [VCl(2)(tmeda)(2)] (tmeda=tetramethylethylenediamine) is treated with the disulfides [HsalanS](2) or [HvananS](2) (HsalanS and HvananS are the Schiff bases formed between o-mercaptoaniline and salicylaldehyde (Hsal) or vanillin (Hvan), respectively), yielding the V(III) complexes [VCl(tmeda)(salanS)] (2 a), or [VCl(tmeda)(vananS)] (2 b). The disulfide bond remains intact in the aerial reaction between [HsalanS](2) and [VCl(3)(thf)(3)] to yield the V(V) complex [VOCl[salanS](2)] (3), where (salanS)(2-) coordinates through the two phenolate and one of the imine functions. The S-S bond is also preserved as [VO(van)(2)] or [VO(nap)(2)] (Hnap=2-hydroxynaphthalene-1-carbaldehyde) is treated with bis(2-aminophenyl)disulfide, [anS](2), a reaction which is accompanied by condensation of the aldehyde and the diamine, and complexation of the resulting bis(Schiff bases) [HvananS](2) or [HnapanS](2) to form the complexes [VO[vananS](2)] (4 a) or [VO[napanS](2)] (4 b). In 4 a and 4 b, the phenolate and imine functions, and presumably also one of the disulfide-S atoms, coordinate to V(IV). 2-Mercaptophenyl-2'-pyridinecarboxamide (H(2)picanS) retains its identity in the presence of V(III); reaction between [VCl(3)(thf)(3)] and H(2)picanS yields [V[picanS](2)](-) (5). The dithiophenolate 2,6-bis(mercaptophenylthio)dimethylpyridine (6 a) is oxidized, mediated by VO(2+), to the bis(disulfide) octathiadiaza-cyclo-hexaeicosane 6 b. The relevance of these reactions for the speciation of vanadium under physiological conditions is addressed. [HNEt(3)]-1.0.5 NEt(3,) 3.3 CH(2)Cl(2), [HsalanS](2), [HNEt(3)]-5, and 6 b.4 THF have been characterized by X-ray diffraction analysis.     

Determination of caffeoylquinic acids and flavonoids inCynara scolymus L. by high performance liquid chromatography

Summary The main phenolic compounds in dried extracts fromCynara scolymus (artichoke)—monocaffeoylquinic acids, dicaffeoylquinic acid, and flavonoids–have been separated by high-performance liquid chromatography. By use of a narrow bore C₁₈ column and an acidic mobile phase this HPLC method enabled improved separation within 31 min with significantly reduced solvent consumption compared with other methods. The method was validated to demonstrate its linearity, precision, accuracy, and robustness. Twelve commercial samples were analyzed. Monocaffeoylquinic acids were the most abundant phenolic compounds; the amounts present ranged from 0.48 to 4.24%. The amounts of dicaffeoylquinic acids and flavonoids were smaller—from 0.03 to 0.52%. The method is a good combination of efficiency and economy and should be especially useful for commercial applications.     

Friction coefficients of spheres having sticky or hairy surfaces

The theoretical equations for friction coefficients of spheres having sticky or hairy surfaces are presented. In the present treatment, the sticky surface is represented by a higher viscosity of fluid in the surface layer and the hairy surface is assumed to have a porous structure. The friction coefficients are given as functions of the thickness of the surface layer, the fluid viscosity in the surface layer and the segmental density of hairy chains.     

Neutral carrier based silicone rubber membranes for H3O+, K+, NH4 + and Ca2+ selective electrodes

Summary Silicone rubber is a universal membrane matrix for neutral carrier based ion-selective electrodes. Carrier antibiotics as well as synthetic ionophores yield sensors with selectivities that are comparable or even higher than those of corresponding poly(vinyl chloride) (PVC) membrane systems. The permeability of silicone rubber membranes for gas molecules is about ten times higher than the permeability of PVC membranes. In contrast, the electrical conductivity is by a factor of 10–100 lower.

---

Auf neutralen Carriern beruhende Silikongummimembran-Elektroden mit Selektivität für H₃O⁺, K⁺, NH₄ ⁺ und Ca²⁺

Zusammenfassung In ionenselektiven Elektroden auf der Basis von neutralen Carriern läßt sich Silikongummi als universelle Membranmatrix einsetzen. Entsprechende Sensoren sind sowohl mit ionenselektiven Antibiotika als auch mit synthetischen Carriern realisiert worden. Ihre Selektivitäten übertreffen teilweise jene von entsprechenden PVC-Membranen. Die Permeabilität der Silikongummimembranen für Gasmolekel ist ungefähr zehnmal höher als jene von PVC-Membranen. Andererseits ist die elektrische Leitfähigkeit um einen Faktor 10–100 niedriger.

     

Separation of neptunium, plutonium, americium and curium from uranium with di-(2-ethylhexyl)-phosphoric acid (HDEHP) for radiometric and ICP-MS analysis

The possibility of using di-(2-ethylhexyl)-phosphoric acid (HDEHP) in solvent extraction for the separation of neptunium, plutonium, americium and curium from large amounts of uranium was studied. Neptunium, plutonium, americium and curium (as well as uranium) were extracted from HNO₃, whereafter americium and curium were back-extracted with 5M HNO₃. Thereafter was neptunium back-extracted in 1M HNO₃ containing hydroxylamine hydronitrate. Finally, plutonium was back-extracted in 3M HCl containing Ti(III). The method separates²³⁸Pu from²⁴¹Am for α-spectroscopy. For ICP-MS analysis, the interferences from²³⁸U are eliminated: tailing from²³⁸U, for analysis of²³⁷Np, and the interference of²³⁸UH⁺ for analysis of²³⁹Pu. The method has been used for the analysis of actinides in samples from a spent nuclear fuel leaching and radionuclide transport experiment.     

Ligand substitution of FeRu2(CO)12 and Fe2Ru(CO)12 with tertiary phosphines and phosphites

Ligand substitution of the mixed-metal clusters FeRu₂(CO)₁₂ and Fe₂Ru(CO)₁₂ with triphenylphosphine and trimethylphosphite has been studied. Mono- and di-substituted derivatives have been synthesized and characterized structurally. The following crystal and molecular structures are reported: Fe₂Ru(CO)₁₁PPh₃: triclinic, space group P$\text{1}$, a 9.203(2), b 11.903(3), c 15.117(4) Å, α 81.54(2), β 87.28(2), γ 66.72(2)°, Z = 2; Fe₂Ru(CO)₁₁P(OMe)₃: orthorhombic, space group Pna2₁, a 17.220(5), b 14.572(4), c 8.708(6) Å, Z = 4, FeRu₂(CO)₁₁PPh₃: monoclinic, space group P2₁/n, a 11.435(3), b 16.034(5), c 16.642(4) Å, β 93.35(2)°, Z = 4; FeRu₂(CO)₁₀(PPh₃)₂: orthorhombic, space group Pccm, a 14.854(4), b 17.180(7), c 16.786(12) Å, Z = 4.Ligand substitution is found to occur preferentially at the ruthenium centers of the FeRu₂ and Fe₂Ru clusters. Monosubstitution causes expansion of both of the clusters while the overall geometry is practically unchanged. Disubstitution of FeRu₂(CO)₁₂ causes contraction of the cluster and leads to a formation of carbonyl bridges. The structural trends have been interpreted in terms of electronic and packing effects of ligand substitution. The X-ray structures of Fe₂Ru(CO)₁₂ and FeRu₂(CO)₁₂ are not known; the ligand substitution studies indicate that Fe₂Ru(CO)₁₂ has the same structure as Fe₃(CO)₁₂, and that FeRu₃(CO)₁₂ does not have a Ru₃(CO)₁₂ structure as postulated previously from the IR studies.     

Formation and Crystal Structure of [(F5TeOXe)+·SO2ClF][Sb(OTeF5)6-]

Xe(OTeF₅)₂ reacts with Sb(OTeF₅)₃ under the formation of [Xe₂(OTeF₅)₃]⁺[Sb(OTeF₅)₆]^-. From SO₂ClF solution a yellow solvate [F₅TeOXe]⁺·SO₂ClF· [Sb(OTeF₅)₆]^- is formed with the crystal data: a = 1028.1(1), b = 1040.9(1), c = 1780.2(3) pm, α = 98.07(1), β = 97.68(1), γ = 105.82(1)°, space group . The O-Xe···O fragment is essentially linear (176.1(2)°), and the two Xe-O distances are quite different 197.1(4) and 242.6(4) pm.     

Phosphino[tris(trimethylsilyl)methyl]Boranes and 2,4‐Bis[tris(trimethylsilyl)methyl]‐1,3,2,4‐diphosphadiboretanes [1]

The reaction of tris(trimethylsilyl)methylboron dihalides (Me₃Si)₃CBX₂ (X = Cl, F) with the lithium phosphides LiPHtBu and LiPHmes leads to the phosphinoboranes (Me₃Si)₃CBX‐(PHR), (Me₃Si)₃CB(PHR)₂ or the 1,3,2,4‐diphosphadiboretanes [(Me₃Si)₃CB(PR)]₂, depending on the ratio of the reagents, the reaction temperature and concentration. High dilution and low temperatures are required for the synthesis of (Me₃Si)₃CB(Hal)PHR ( 1–3 ) in order to prevent the formation of (Me₃Si)₃CB(PHR)₂ ( 4 and 5 ). The latter compounds are best prepared in a two step phosphination from (Me₃Si)₃CBHal₂ and LiPHR. At higher temperatures the four‐membered 1,3,2,4‐diphosphadiboretanes [(Me₃Si)₃CB(PR)]₂ 6 and 7 are the most stable compounds. On the other hand, compounds of type (Me₃Si)₃CB(Hal)PR₂, 8 and 9 , are thermally more stable than the monophosphinoboranes 1 – 3 . Phosphinoboranes of type (Me₃Si)₃CB(PR₂)₂ (R = tBu, mes) could not be prepared. NMR and mass spectral data are in accord with the monomeric nature of compounds 1 to 9 .     

Neue Derivate der 2-Acylamino-thiophen-(und-benzo[b]thiophen-)-3-carbonsäure sowie des ([1]Benzo-)Thieno[2,3-d]-pyrimidin-4(3H)-ons

The title substances1 and2 were prepared by acylation of the corresponding ethyl 2-amino-thiophene- (or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxylates, in some cases followed by reactions introducing a basic substituent.Additionally a group of 2-aroylamino-thiophene-(or:-4,5,6,7-tetrahydro-benzo[b]thiophene)-3-carboxamides was subjected to ring closure reactions, yielding the corresponding 2-aryl-thieno[2,3-d]pyrimidin-4(3H)-ones and 2-aryl-[1]benzothieno[2,3-d]pyrimidin-4(3H)-ones (both:3).

---

---

Zum Teil unter Mitarbeit vonFerdinand Fuhrmann