Self‐Assembly of a Highly Organized,Hexameric Supramolecular Architecture: Formation,Structure and Properties

Two derivatives, ³ L and ⁹ L , of a ditopic, multiply hydrogen‐bonding molecule, known for more than a decade, have been found, in the solid state as well as in solvents of low polarity at room temperature, to exist not as monomers, but to undergo a remarkable self‐assembly into a complex supramolecular species. The solid‐state molecular structure of ³ L , determined by single‐crystal X‐ray crystallography, revealed that it forms a highly organized hexameric entity ³ L ₆ with a capsular shape, resulting from the interlocking of two sets of three monomolecular components, linked through hydrogen‐bonding interactions. The complicated ¹H NMR spectra observed in o‐dichlorobenzene (o‐DCB) for ³ L and ⁹ L are consistent with the presence of a hexamer of D₃ symmetry in both cases. DOSY measurements confirm the hexameric constitution in solution. In contrast, in a hydrogen‐bond‐disrupting solvent, such as DMSO, the ¹H NMR spectra are very simple and consistent with the presence of isolated monomers only. Extensive temperature‐dependent ¹H NMR studies in o‐DCB showed that the L ₆ species dissociated progressively into the monomeric unit on increasing th temperature, up to complete dissociation at about 90 °C. The coexistence of the hexamer and the monomer indicated that exchange was slow on the NMR timescale. Remarkably, no species other than hexamer and monomer were detected in the equilibrating mixtures. The relative amounts of each entity showed a reversible sigmoidal variation with temperature, indicating that the assembly proceeded with positive cooperativity. A full thermodynamic analysis has been applied to the data.     

Inorganic–Organic Heteropolyacid–Gold(I) Hybrids: Structures and Catalytic Applications

Gold(I)‐polyoxometalate hybrid complexes 1 – 4 ([PPh₃AuMeCN]_xH_4?xSiW₁₂O₄₀, x=1–4) were synthesized and characterized. The structure of the primary gold(I)–polyoxometalate 1 (x=1) was fully ascertained by XRD, FTIR, ³¹P and ²⁹Si magic‐angle spinning (MAS) NMR, mass spectroscopy, and SEM–energy dispersive X‐ray spectroscopy (EDX) techniques. Moreover, this complex exhibited better catalytic activity and selectivity compared with standard, homogeneous, gold catalysts in the new rearrangement of propargylic gem‐diesters.     

Dual Catalysis with Copper and Rhenium for Trifluoromethylation of Propargylic Alcohols: Efficient Synthesis of α‐Trifluoromethylated Enones

Trifluoromethylation of propargylic alcohols to provide (Z)‐α‐trifluoromethylated enones and β‐unsubstituted α‐trifluoromethylated enones proceeded with high yield and selectivity in the presence of CuI/Re₂O₇. The Z isomer was formed under kinetic control, though it is less stable than the E isomer in terms of steric repulsion.     

A Multifunctional Photoswitch: 6π Electrocyclization versus ESIPT and Metalation

A terthiazole‐based molecular switch associating 6π electrocyclization, excited state intramolecular proton transfer (ESIPT), and strong metal binding capability was prepared. The photochemical and photophysical properties of this molecule and of the corresponding nickel and copper complexes were thoroughly investigated by steady‐state and ultrafast absorption spectroscopy and rationalized by DFT/TDDFT calculations. The switch behaves as a biphotochrome with time‐dependent photochemical outcome and displays efficient ESIPT‐based fluorescence photoswitching. Both photochemical reactions are suppressed by nickel or copper metalation, and the main factors contributing to the quenching of the electrocyclization are discussed.     

Sponge Phase Producing Porous CeO2 for Catalytic Oxidation of CO

The aggregation behavior of mixtures of the alkaline amino acid L ‐Arginine (L ‐Arg) and bis(2‐ethylhexyl)phosphoric acid (DEHPA) in water was studied in detail. At a fixed L ‐Arg concentration, a phase sequence of micellar phase (L₁ phase), vesicle phase (L_αv phase), planar lamellar phase (L_αl phase), and sponge phase (L₃ phase) was obtained with increasing DEHPA concentration due to changes in the packing parameter. The phase transition of the lamellar structures was determined by freeze‐fracture TEM and ²H NMR spectroscopy. Rheological measurements reflected the phase transition through significant variations of both the elastic modulus and the viscous modulus. Porous CeO₂ materials were produced by utilizing the L₃ phase as template, and the porous CeO₂ exhibited excellent catalytic oxidation activity toward CO due to its high surface area, which provides more active sites for CO conversion.     

Insertion of a Single‐Molecule Magnet inside a Ferromagnetic Lattice Based on a 3D Bimetallic Oxalate Network: Towards Molecular Analogues of Permanent Magnets

The insertion of the single‐molecule magnet (SMM) [Mn^III(salen)(H₂O)]₂²⁺ (salen^2?=N,N′‐ethylenebis‐(salicylideneiminate)) into a ferromagnetic bimetallic oxalate network affords the hybrid compound [Mn^III(salen)(H₂O)]₂[Mn^IICr^III(ox)₃]₂ ? (CH₃OH) ? (CH₃CN)₂ ( 1 ). This cationic Mn₂ cluster templates the growth of crystals formed by an unusual achiral 3D oxalate network. The magnetic properties of this hybrid magnet are compared with those of the analogous compounds [Mn^III(salen)(H₂O)]₂[Zn^IICr^III(ox)₃]₂ ? (CH₃OH) ? (CH₃CN)₂ ( 2 ) and [In^III(sal₂‐trien)][Mn^IICr^III(ox)₃] ? (H₂O)_0.25 ? (CH₃OH)_0.25 ? (CH₃CN)_0.25 ( 3 ), which are used as reference compounds. In 2 it has been shown that the magnetic isolation of the Mn₂ clusters provided by their insertion into a paramagnetic oxalate network of Cr^III affords a SMM behavior, albeit with blocking temperatures well below 500 mK even for frequencies as high as 160 kHz. In 3 the onset of ferromagnetism in the bimetallic Mn^IICr^III network is observed at T_c=5 K. Finally, in the hybrid compound 1 the interaction between the two magnetic networks leads to the antiparallel arrangement of their respective magnetizations, that is, to a ferrimagnetic phase. This coupling induces also important changes on the magnetic properties of 1 with respect to those of the reference compounds 2 and 3 . In particular, compound 1 shows a large magnetization hysteresis below 1 K, which is in sharp contrast with the near‐reversible magnetizations that the SMMs and the oxalate ferromagnetic lattice show under the same conditions.     

Chemical Behaviour of a Prototype Boryl(phosphino)carbene

We recently disclosed the synthesis of a novel “push–pull” boryl(phosphino)carbene. To determine the influence of this substitution pattern on the chemical behaviour, a study into the reactivity of the prototype ( 1 ) of this new family of B(sp²)‐substituted phosphinocarbenes was undertaken. Carbene 1 exhibits one of the most common intramolecular rearrangements of singlet carbenes, involving a 1,2‐mesityl shift, and typical [2+1] cycloaddition reactions with electron‐poor acrylonitrile. A pronounced α,β‐ambiphilic character was also shown by the reaction of 1 with benzaldehyde, leading to phosphorylalkene 4 . Due to its specific electronic properties, carbene 1 also exhibits unprecedented reactivity with chloroacrylonitrile, enabling the formation of bicyclo[1.1.0]phosphetanium salt 6 and borylcyclopropene 9 , which have been fully characterised by NMR spectroscopy and X‐ray crystallography.     

Clickable Periodic Mesoporous Organosilicas: Synthesis,Click Reactions,and Adsorption of Antibiotics

Pharmaceutical antibiotics are not easily removed from water by conventional water‐treatment technologies and have been recognized as new emerging pollutants. Herein, we report the synthesis of clickable azido periodic mesoporous organosilicas (PMOs) and their use as adsorbents for the adsorption of antibiotics. Ethane‐bridged PMOs, functionalized with azido groups at different densities, were synthesized by the co‐condensation of 1,2‐bis(trimethoxysilyl)ethane (BTME) and 3‐azidopropyltrimethoxysilane (AzPTMS), in the presence of nonionic‐surfactant triblock‐copolymer P123, in an acidic medium. Four different alkynes were conjugated to azide‐terminated PMOs by means of an efficient click reaction. The clicked PMOs showed improved adsorption capacity (241 μg g^?1) for antibiotics (ciprofloxacin hydrochloride) compared with azido‐functionalized PMOs because of the enhanced π–π stacking interactions. These results indicate that click reactions can introduce multifunctional groups onto PMOs, thus demonstrating the great potential of PMOs for environmental applications.