Spatially resolved Raman spectroscopy evaluation of residual stresses in 3C-SiC layer deposited on Si substrates with different crystallographic orientations

Raman scattering studies were performed on hot-wall chemical vapor deposited (heteroepitaxial) silicon carbide (SiC) films grown on Si substrates with orientations of (1 0 0), (1 1 1), (1 1 0) and (2 1 1), respectively. Raman spectra suggested that good quality cubic SiC single crystals could be obtained on the Si substrate, independent of its crystallographic orientation. Average residual stresses in the epitaxially grown 3C-SiC films were measured with the laser waist focused on the epilayer surface. Tensile and compressive residual stresses were found to be stored within the SiC film and in the Si substrate, respectively. The residual stress exhibited a marked dependence on the orientation of the substrate. The measured stresses were comparable to the thermal stress deduced from elastic deformation theory, which demonstrates that the large lattice mismatch between cubic SiC and Si is effectively relieved by initial carbonization. The confocal configuration of the optical probe enabled a stress evaluation along the cross-section of the sample, which showed maximum tensile stress magnitude at the SiC/Si interface from the SiC side, decreasing away from the interface in varied rate for different crystallographic orientations. Defocusing experiments were used to precisely characterize the geometry of the laser probe in 3C-SiC single crystal. Based on this knowledge, a theoretical convolution of the in-depth stress distribution could be obtained, which showed a satisfactory agreement with stress values obtained by experiments performed on the 3C-SiC surface.     

Effect of end groups on complexation kinetics between cyclodextrins and guest polymers

α‐Cyclodextrin (α‐CD) has been complexed with various poly(ethylene glycol) (PEG) derivatives in aqueous solution. It has been found that the end groups of PEG derivatives affect the complexation kinetics greatly, but have only a little influence on the thermodynamic behavior. By increasing the hydrophobicity of end groups, the complexation speeds up rapidly. On the other hand, the bulky end groups slow down the threading of polymeric guests into the cavity of CD. By changing the hydrophobicity and the size of end groups, the complexation rate can be adjusted in the range of several orders of magnitudes, which should be quite useful in the design of new supramolecular systems. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2050–2057, 2006     

感性与理性的和谐统一--构建和谐课堂的点滴体会

1感性认识与理性认识的和谐统一 在教育理念不断更新发展的今天，有一个新的课堂环境和课堂教学理念，是每一个教育工作者自身发展的一项重要任务．特别是在高中物理学科的课堂教学中，构建人与自然的和谐统一，就要从身边的自然环境出发，立足于感性认识为本，再升华为理性认识，把二者有机结合起来，才能让学生获得一个情感与理论上的和谐统一，提高学生对物理学科的浓厚兴趣．     

Precise measurement of magnetic moment of short-lived β-emitting nuclei12B ( I π=1+, T 1/2=20.18 ms)

The spin polarized β-emitting nuclei¹²B (I ^π=1⁺,T _1/2=20.18 ms) were produced by the nuclear reaction¹¹B(d, p)¹²B and by the selection technique of the incident deuteron energy and the¹²B recoil angle following the nuclear reaction. The nuclear magnetic moment of the short-lived nuclei¹²B was measured by β-NMR with the β-NMR and β-NQR setup established for the first time in China. The nuclear magnetic moment of¹²B was determined to be μ=0.99993±0.00048 nm org=0.99993±0.00048 after the precise correction of the Knight shift.     

Investigating and ordering Quadrilaterals and their analogies in space—problem fields with various aspects

Problem fields with one or two generating problems and possibilities of varying existing problems give a good chance for self-activities of students and can be used for reaching different general aims. In this paper some topics concerning quadrilaterals will be presented. I hope they will animate teachers for more problem orientation in mathematics education. First we will reflect about different types of convex and non-convex quadrilaterals and possibilities of ordering them. Then we focus on middle-quadrilaterals and types of quadrilaterals with special middle-quadrilaterals as well as their logical ordering. Finally we investigate the analogies in space to the parallelogram and its sub-types and order them in the “house of parallelepipeds”.     

The Characterisitic of Proton-Exchanged LiNbO3 Waveguide Formed by Different Proton Source

Benzoic acid as a source of proton is widely used in the technology of manufacture of proton exchanged ( PE) waveguide .But the diffusing speed of proton is too fast to make the waveguide stable in the pure benzoic acid. The characteristic of waveguide is improved with mixture of benzoic acid and lithium benzoate .     

Hierarchical structures in a turbulent pipe flow

A hierarchical structure (HS) analysis (β-test and γ-test) is applied to a fully developed turbulent pipe flow. Velocity signals are measured at two cross sections in the pipe and at a series of radial locations from the pipe wall. Particular attention is paid to the variation of turbulent statistics at wall units 10<y⁺<3000. It is shown that at all locations the velocity fluctuations satisfy the She–Leveque hierarchical symmetry (Phys. Rev. Lett. 72 (1994) 336). The measured HS parameters, β and γ, are interpreted in terms of the variation of fluid structures. Intense anisotropic fluid structures generated near the wall appear to be more singular than the most intermittent structures in isotropic turbulence and appear to be more outstanding compared to the background fluctuations; this yields a more intermittent velocity signal with smaller γ and β. As turbulence migrates into the logarithmic region, small-scale motions are generated by an energy cascade and large-scale organized structures emerge which are also less singular than the most intermittent structures of isotropic turbulence. At the center, turbulence is nearly isotropic, and β and γ are close to the 1994 She–Leveque predictions. A transition is observed from the logarithmic region to the center in which γ drops and the large-scale organized structures break down. We speculate that it is due to the growing eddy viscosity effects of widely spread turbulent fluctuations in a similar way as in the breakdown of the Taylor vortices in a turbulent Couette–Taylor flow at high Reynolds numbers.     

Crystal Structure of Adduct 2-Phenyl-imidazo [ 4,5-f ] 1,10-phenanthroline Methanol

The structure of the title adduct comprises a phenanthroline derivative 2-phenyl-imidazo[4,5-f]1,10-phenanthroline and a methanol.The composition of the crystalline adduct was characterized as C19H12N4.CH3OH.It belongs to orthorhombic system,space group Pna21 with a=1.3693(4)nm,b=2.2988(7)nm,c=0.51338(15)nm,V=1.6160(8)nm^3.Z=4,and final R1=0.0423.wR2=0.1012 .Crystal structure shows that all the 19 carbon atoms and 4 nitrogen atoms are coplanar.The bond length data indicated that a very extensive conjugation system was formed.This conjugation makes the compound being a potentially excellent energy transformer used for luminescent materials.     

Speciation Analysis of Inorganic Tin (Sn(II)/Sn(IV)) by Graphite Furnace Atomic Absorption Spectrometry Following Ion-Exchange Separation

A new method based on anion exchange resin separation and graphite furnace atomic absorption spectrometry (GFAAS) detection is proposed for the determination of inorganic tin species. The result showed that Sn(IV) was quantitatively retained on the resin when [HCl] = 9.0 mol · L⁻¹, but Sn(II) could not be adsorbed on the resin under the same condition. Thus, a separation of Sn(II) and Sn(IV) has been realized. When the concentration of NaOH solution was between 2.0–7.0 mol · L⁻¹, Sn(IV) that adsorbed on the resin could be eluated from the resin completely. Meanwhile, under the atmosphere and the nitrogen states, the translation between Sn(II) and Sn(IV) was investigated. Under the optimal conditions, the detection limit of Sn(IV) is 0.40 μg · L⁻¹ with RSD of 2.3% (n = 5, c = 2.0 μg · L⁻¹). The proposed method was applied to the speciation analysis of tin in different water samples and the recovery of total Sn was in the range of 98.7–101.7%. In order to verify the accuracy of the method, a certified reference water sample was analyzed and the results obtained were in good agreement with the certified value.