Isolation and Crystallographic Characterization of Two,Nonisolated Pentagon Endohedral Fullerenes: Ho3N@C2(22010)-C78 and Tb3N@C2(22010)-C78

Purified samples of Ho₃N@C₂(22010)-C₇₈ and Tb₃N@C₂(22010)-C₇₈ have been isolated by two distinct processes from the rich array of fullerenes and endohedral fullerenes present in carbon soot from graphite rods doped with Ho₂O₃ or Tb₄O₇. Crystallographic analysis of the endohedral fullerenes as cocrystals with Ni(OEP) (in which OEP is the dianion of octaethylporphyrin) shows that both molecules contain the chiral C₂(22010)-C₇₈ cage. This cage does not obey the isolated pentagon rule (IPR) but has two sites where two pentagons share a common C−C bond. These pentalene units bind two of the metal ions, whereas the third metal resides near a hexagon of the cage. Inside the cages, the Ho₃N or Tb₃N unit is planar. Ho₃N@C₂(22010)-C₇₈ and Tb₃N@C₂(22010)-C₇₈ use the same cage previously found for Gd₃N@C₂(22010)-C₇₈ rather than the IPR-obeying cage found in Sc₃N@D_3h-C₇₈.     

Low-Valent Group 14 NHC-Stabilized Phosphinidenide ate Complexes and NHC-Stabilized K/P-Clusters

The N-heterocyclic carbene (NHC)-stabilized phosphinidenide, SIMesPK [SIMes=1,3-bis(2,4,6-trimethylphenyl)imidazolidine-2-ylidene], was used as an (NHC)P-transfer reagent for the synthesis of the low-valent Group 14 ate complexes K[(SIMesP)₃E] (E=Ge: 2 , Sn: 3 , Pb: 4 ), which were characterized by ¹H NMR, ³¹P NMR, IR spectroscopy as well as elemental and X-ray analysis. Furthermore, SIMesPK was used in reactions with potassium amides and alkoxides to form the molecular phosphorus–potassium clusters [K₄(SIMesP)₂(hmds)₂] [ 5 , hmds=N(SiMe₃)₂] and [K₆(SIMesP)₂(OtBu)₄] ( 6 ). Finally, the reaction of SIMesPK with Li[Al(OC₄F₉)₄] led to the potassium-rich ionic compound [(SIMesP)₄K₅][Al(OC₄F₉)₄] ( 7 ).     

Rational Synthesis of Iron/Nitrogen-Doped Carbon Catalyst through a Spatial Isolation Strategy for Efficient Oxygen Reduction in Acidic and Alkaline Media

It remains challenging to rationally synthesize iron/nitrogen-doped carbon (Fe/N-C) catalysts with rich Fe−N_x atomic active sites for improved oxygen reduction reaction (ORR) electrocatalysis. A highly efficient Fe/N-C catalyst, which has been synthesized through a spatial isolation strategy, is reported. Derived from bioinspired polydopamine (PDA)-based hybrid microsphere precursors, it is a multifunctional carrier that loads atomically dispersed Fe³⁺/Zn²⁺ ions through coordination interactions and N-rich melamine through electrostatic attraction and covalent bonding. The Zn²⁺ ions and melamine in the precursor efficiently isolate Fe³⁺ atoms upon pyrolysis to form rich Fe−N_x atomic active sites, and generate abundant micropores during high-temperature treatment; as a consequence, the resultant Fe-N/C catalyst contains rich catalytically active Fe−N_x sites and a hierarchical porous structure. The catalyst exhibits improved ORR activity that is superior to and close to that of Pt/C in alkaline and acidic solutions, respectively.     

Modifying LnHPDO3A Chelates for Improved T1 and CEST MRI Applications

The new ligand HPDO3MA [(R,R,R,R)-10-(2-hydroxypropyl)-α,α′,α′′-trimethyl-1,4,7,10-tetraazacyclododecane-1,4,7-triacetic acid] was designed to combine and optimize the chemical properties of the macrocyclic ligands HPDO3A and DOTMA. The presence of the methyl groups on the acetic pendant arms of HPDO3A is expected to rigidify the structure of the ligand and favor an increase of the kinetic inertness of the Ln complexes. ¹H NMR spectra of Eu(HPDO3MA) displayed the presence of two pairs of diastereoisomers: SAP (square antiprismatic) and TSAP (twisted square antiprismatic) isomers (56 and 44 %, respectively). In addition, ¹H and ¹⁷O relaxometric NMR studies of Gd(HPDO3MA) showed approximately a 10 % increase in relaxivity and a faster water exchange rate with respect to Gd(HPDO3A). Moreover, a detailed chemical exchange saturation transfer (CEST) characterization of Yb(HPDO3MA) displayed a sensitivity about two times larger than that of Yb(HPDO3A) both in phantom and in cell labeling experiments. Finally, the kinetic inertness of Yb(HPDO3MA) was measured to be twice as high as that of Yb(HPDO3A), with a dissociation half-life at physiological pH of about 2500 years.     

Synthesis and Characterization of Hydrophilic Trityl Radical TFO for Biomedical and Biophysical Applications

Tetrathiatriarylmethyl (TAM, trityl) radicals have found wide applications as spin probes/labels for EPR spectroscopy and imaging, and as polarizing agents for dynamic nuclear polarization. The high hydrophilicity of TAM radicals is essential for their biomedical applications. However, the synthesis of hydrophilic TAM radicals (e.g., OX063) is extremely challenging and has only been reported in the patent literature, to date. Herein, an efficient synthesis of a highly water-soluble TAM radical bis(8-carboxyl-2,2,6,6-tetramethylbenzo[1,2-d:4,5-d′]bis([1,3]dithiol-4-yl)-mono-(8-carboxyl-2,2,6,6-tetrakis(2-hydroxyethyl)benzo[1,2-d:4,5-d′]bis([1,3]dithiol-4-yl)methyl (TFO), which contains four additional hydroxylethyl groups, relative to the Finland trityl radical CT-03, is reported. Similar to OX063, TFO exhibits excellent properties, including high water solubility in phosphate buffer, low log P, low pK_a, long relaxation times, and negligible binding with bovine serum albumin. On the other hand, TFO has a sharper EPR line and higher O₂ sensitivity than those of OX063. Therefore, in combination with its facile synthesis, TFO should find wide applications in magnetic resonance related fields and this synthetic approach would shed new light on the synthesis of other hydrophilic TAM radicals.     

Tailorable PC71BM Isomers: Using the Most Prevalent Electron Acceptor to Obtain High‐Performance Polymer Solar Cells

Despite being widely used as electron acceptor in polymer solar cells, commercially available PC₇₁BM (phenyl‐C₇₁‐butyric acid methyl ester) usually has a “random” composition of mixed regioisomers or stereoisomers. Here PC₇₁BM has been isolated into three typical isomers, α‐, β₁‐ and β₂‐PC₇₁BM, to establish the isomer‐dependent photovoltaic performance on changing the ternary composition of α‐, β₁‐ and β₂‐PC₇₁BM. Mixing the isomers in a ratio of α/β₁/β₂=8:1:1 resulted in the best power conversion efficiency (PCE) of 7.67 % for the polymer solar cells with PTB7:PC₇₁BM as photoactive layer (PTB7=poly[[4,8‐bis[(2‐ethylhexyl)oxy]benzo[1,2‐b:4,5‐b′]dithiophene‐2,6‐diyl][3‐fluoro‐2‐[(2‐ethylhexyl)carbonyl]thieno[3,4‐b]thiophenediyl]]). The three typical PC₇₁BM isomers, even though sharing similar LUMO energy levels and light absorption, render starkly different photovoltaic performances with average‐performing PCE of 1.28–7.44 % due to diverse self‐aggregation of individual or mixed PC₇₁BM isomers in the otherwise same polymer solar cells.     

Formamide Synthesis through Borinic Acid Catalysed Transamidation under Mild Conditions

A highly efficient and mild transamidation of amides with amines co‐catalysed by borinic acid and acetic acid has been reported. A wide range of functionalised formamides was synthesized in excellent yields, including important chiral α‐amino acid derivatives, with minor racemisation being observed. Experiments suggested that the reaction rely on a cooperative catalysis involving an enhanced boron‐derived Lewis acidity rather than an improved Brønsted acidity of acetic acid.