Hole and Electron Doping of the 4d Transition-Metal Oxyhydride LaSr3NiRuO4H4

Hole or electron doping of phases prepared by topochemical reactions (e.g. anion deintercalation or anion-exchange) is extremely challenging as these low-temperature conversion reactions are typically very sensitive to the electron counts of precursor phases. Herein we report the successful hole and electron doping of the transition-metal oxyhydride LaSr₃NiRuO₄H₄ by first preparing precursors in the range La_xSr_4−xNiRuO₈ 0.5<x<1.4 and then converting into the corresponding La_xSr_4−xNiRuO₄H₄ phases. This is particularly noteworthy as the (Ni/Ru)H₂ sheets in the La_xSr_4−xNiRuO₄H₄ phases are structurally analogous to the CuO₂ sheets in cuprate superconductors and hole doping (Ni^1+/2+, Ru²⁺) or electron doping (Ni²⁺, Ru^1+/2+) yields materials with partial occupancy in Ni/Ru –H 1s bands which are analogous to the partially occupied Cu –O 2p bands present in the CuO₂ sheets of doped superconducting cuprates.     

Lattice Thermal Transport in the Homogeneous Cage-Like Compounds Cu3VSe4 and Cu3NbSe4: Interplay between Phonon-Phase Space,Anharmonicity, and Atomic Mass

Understanding the correlation between crystal structure and thermal conductivity in semiconductors is very important for designing heat-transport-related devices, such as high-performance thermoelectric materials and heat dissipation in micro-nano-scale devices. In this work, the lattice thermal conductivity ( ) of the cage-like compounds Cu₃VSe₄ and Cu₃NbSe₄ was investigated by experimental measurements and first-principles calculations. The experimental of Cu₃NbSe₄ is approximately 25 % lower than that of Cu₃VSe₄ at 300 K. The relevant important physical parameters, including the sound velocity, heat capacity, weighted phonon phase space (W), and third-order force constants along with atomic mass were theoretically analyzed. It is found that W is the dominant parameter in determining the , and the other factors only play a minor role. The physical origin is the relatively “soft” lattice of Cu₃NbSe₄ with heavier atomic mass. This research provides deep insight into the correlation between the thermal conductivity and crystal structure and paves the way for discovering high-performance thermal management device and thermoelectric materials with intrinsically low .     

Synthesis of (−)-mellein, (+)-ramulosin, and related natural products

(−)-Mellein, (+)-ramulosin, (−)-O-methylmellein, (−)-6-hydroxymellein, (−)-6-methoxymellein, and (+)-6-hydroxyramulosin were synthesized as optically active forms using one-pot esterification-Michael addition-aldol reaction of δ-hydroxy-α,β-unsaturated aldehyde and diketene as a key step.     

Proton Relaxometry of Long-Lived Spin Order

A study of long-lived spin order in chlorothiophene carboxylates at both high and low magnetic fields is presented. Careful sample preparation (removal of dissolved oxygen in solution, chelating of paramagnetic impurities, reduction of convection) allows one to obtain very long-lived singlet order of the two coupled protons in chlorothiophene derivatives, having lifetimes of about 130 s in D₂O and 240 s in deuterated methanol, which are much longer than the T₁-relaxation times (18 and 30 s, respectively, at a field =9.4 T). In protonated solvents the relaxation times become shorter, but the lifetime is still substantially longer than . In addition, long-lived coherences are shown to have lifetimes as long as 30 s. Thiophene derivatives can be used as molecular tags to study slow transport, slow dynamics and slow chemical processes, as has been shown in recent years.     

Synthesis and structural characterisation of a novel tris-methylene bridged compound (NO) 4Fe2 Se(μ-CH2)3

The tris-methylene bridged compound (NO)₄Fe₂Se(μ-CH₂)₃ has been isolated. It has been characterised by IR and ¹H, ¹³C, and ⁷⁷Se NMR spectroscopy. Its structure has been determined by single-crystal X-ray diffraction methods. The structure consists of a heavy atom triangle consisting of one Se and two Fe atoms. The Fe-Fe and the two Fe-Se edges are bridged by methylene groups.     

Polarographic behaviour of salicylaldehyde-2-pyridylhydrazone and its copper(II) complex

The polarographic behaviour of salicylaldehyde-2-pyridylhydrazone (SAPH) has been studied in aqueous buffer solution containing 40% ethanol using DC and DP polarographic methods. In the pH range 1.8–7.5 the observed single irreversible reduction wave is assigned to the splitting of the N-N bond and reduction of C=N centre. In alkaline medium, a second wave appears at a more negative potential due to the reduction of the salicylaldehyde which is formed by hydrolytic decomposition of the SAPH molecule. The effect of pH on the limiting current andE _1/2 as well as the reduction mechanism are discussed and compared with similar compounds. The kinetic parameters of the electrode reaction have been calculated.The analytical properties of the copper(II)-SAPH system is described. The complex gave rise to a single irreversible well-defined wave (E _1/2=–0.58 V at pH=5.2). The reaction process is diffusion controlled. A method is suggested for the determination of Cu(II) in presence of different metal ions as the difference in theirE _1/2 values is sufficient for the purpose.This work is taken partly from the M. Sc. Thesis of Jamal S. Shalabi     

Darstellung und Reaktionen des 3-Ethinyl-2,4-diformyl-pentandials

Preparation and physical and chemical properties of 3-ethinyl-2,4-diformyl-pentandial (3 a) and its salts are described.3 a contains 2 malonaldehyde groups. Starting from3 a, 4H-pyranes, 4H-dihydropyridines, dipyrazoles, diisoxazoles, bisdiazepines and vinamidine derivates are obtained.

---

---

Mit 1 Abbildung     

Zur Umsetzung des 3,4,5,6-Tetrahydro-6-hydroxy-4,4,6-trimethyl-1,3-thiazin-2-thions mit sekundären Aminen

Tetrahydro-6-hydroxy-trimethyl-1,3-thiazine-2-thione (1) reacts with secondary amines via the dialkylammonium-3-oxoalkyldithiocarbamate3, either via isothiocyanates6 to 4-dialkylaminodihydro-2(1H)-pyridinethiones7 or to dialkylammonium dithiocarbamates (13), depending on the amine used and the reaction conditions. Subsequently, 6-dialkylaminotetrahydro-1,3-thiazine-2-thiones11 or tetrahydro-6-mercapto-1,3-thiazine-2-thione10 are formed. On being heated to reflux,11 reacts to pyridinethione7 and 4-dialkylaminodihydrothiopyranthione19. With secondary amines only13 is formed from tetrahydro-6-hydroxytetramethyl-1,3-thiazine-2-thione20. The reaction of dihydrotrimethyl-1,3-thiazine-2-thione21 with secondary amines leads to N,N-dialkylthioureas16 or dialkylammonium thiocyanates17 and with dialkylformamides 4-dialkylaminodihydropyridinethiones7 are formed. Dihydrotetramethyl-1,3-thiazine-2-thione24 reacts neither with secondary amines nor with dialkylformamides.     

Koordinationschemie von Dinitroresorcin mit Kupfer-, Kobalt-, Nickel-, Eisen- und Zinksalzen

The reactions of the bidentate dinitrosoresorcinol (DNR) with copper, cobalt, nickel, iron and zinc salts were investigated. This ligand was found to react with these metal salts in aqueous media where hydrogen ion was confirmed to be liberated except in case of iron. The solid complexes were prepared in alcoholic media. Chemical analyses, magnetic and spectral data were compatible to determine the structure of these complexes and their mode of chelation.

---

---

Mit 2 Abbildungen     

Beiträge zur Chemie der Pyrrolpigmente, 19. Mitt.: Die elektrochemische Oxidation von Pyrromethenonen und Pyrromethenen (Gallenpigment-Partialstrukturen)

The electrochemical oxidation of arylmethylene-pyrrolinones, pyrromethenones and pyrromethenes as representative bile pigment partial structure models was investigated by means of a rotating disc platinum electrode using acetonitrile as the solvent. Two different oxidation reactions were found. The first reaction being a reversible one-electron oxidation with compounds of the arylmethylene-pyrrolinone series and pyrromethenones which are unsubstituted in position 5 of the pyrrole ring. A two step reaction (the first one reversible, the second irreversible) on the other hand was found to be typical for pyrromethenones bearing a methyl group in this position.Through protonation the first step is at a higher potential, whereas the second one is lowered and becomes reversible. The resulting oxidation pattern can be interpreted analogous to the oxidation of hydroquinones in aprotic solvents.The geometrical isomers of a pyrromethenone were oxidized at appr. the same potential, but there is a strong dependence of the potential of the first oxidation step on the substitution: a higher degree of alkylation favours oxidation by lowering the oxidation potential.

---

---

Mit 1 Abbildung