Untersuchungen der Konformation von alternierenden Copolymeren ausL-Leucin undL-Ornithin in wäßrigen Lösungen

The conformation of the alternating copoly-(L.-leucyl-L-ornithine) was studied in solutions of various salts and in salt-free water as well by CD technique. This copolymer is shown to undergo a conformational transition from a disordered to aβ-structure by adding salts or with increasing the pH to a alkaline region. Such a tendency to form aβ-structure is enhanced by neutral salts like KF, NaF, and NaCl and remarkably enhanced by water structure breaking anions like LiClO₄ and NaClO₄. Theβ-structure induced by perchlorate ions is stable up to 90 °C. This finding can be interpreted in terms of the shielding effect resulted from a specific binding of perchlorate ions with positively charged side chains. Aβ-I-structure is also induced by water structure making anions like Li₂SO₄ and Na₂SO₄, but theβ-structure inducing molecular mechanism is probably different from the case of water structure breaking anions, due to its electrochemical bivalency. This becomes obvious from the fact that above 0.005 mole/l precipition occurs and from model considerations.     

X-ray Crystal Structure, ab Initio Calculations, and Reactivity of 1,3,2lambda(5)-Diazaphosphetes: A New Type of 4-pi-Electron 4-Membered Heterocycle

The structure of P,P-bis(diisopropylamino)-4-phenyl-1,3,2lambda(5)-diazaphosphete, 1a, has been determined by a single-crystal X-ray diffraction study (C(19)H(33)N(4)P, monoclinic system, space group P2(1), a = 9.482(1) ?, b = 11.374(3) ?, c = 9.668(2) ?, beta = 97.16(1) degrees, Z = 2). According to quantum chemical calculations at an RHF level of optimization utilizing the 6-31g(d,p) basis set, 1a has a zwitterionic structure with the negative charge delocalized on the NCN allylic fragment and the positive charge localized at the phosphorus. Heterocycle 1a reacts with water and benzaldehyde affording N-phosphoranylbenzamidine 3 (95% yield) and the expected aza-Wittig adduct 4 (85% yield), respectively. Addition of 1 equiv of methyl trifluoromethanesulfonate and of 2 equiv of BH(3).THF to 1a affords cyclic phosphonium salt 5 (94% yield) and the bis(borane) adduct 6a (90% yield), respectively. Dimethyl acetylenedicarboxylate slowly reacts with 1a giving rise to 1,3,4lambda(5)-diazaphosphinine, 9, in 70% yield. The X-ray crystal structures of products 2,3, and 6a are reported (2: C(26)H(38)N(5)P, monoclinic system, space group C2/c, a = 16.337(8) ?, b = 19.810(2) ?, c = 8.800(2) ?, beta = 117.68(2) degrees, Z = 4. 3: C(19)H(35)N(4)OP, orthorhombic system, space group P2(1)2(1)2(1), a = 9.090(1) ?, b = 12.955(2) ?, c = 17.860(3) ?, Z = 4. 6a: C(19)H(39)B(2)N(4)P, orthorhombic system, space group P2(1)2(1)2(1), a = 10.340(1) ?, b = 13.247(1) ?, c = 16.996(1) ?, Z = 4).     

Umsetzung von Diazoessigsäure-ethylester mit 1,3-Thiazol-5(4H)-thionen

Reaction of Ethyl Diazoacetate with 1,3-Thiazole-5(4H)-thiones Reaction of ethyl diazoacetate ( 2a ) and 1,3-thiazole-5(4H)-thiones 1a,b in Et₂O at room temperature leads to a complex mixture of the products 5–9 (Scheme 2). Without solvent, 1a and 2a react to give 10a in addition to 5a–9a . In Et₂O in the presence of aniline, reaction of 1a,b with 2a affords the ethyl 1,3,4-thiadiazole-2-carboxylate 10a and 10b , respectively, as major products. The structures of the unexpected products 6a, 7a , and 10a have been established by X-ray crystallography. Ethyl 4H-1,3-thiazine-carboxylate 8b was transformed into ethyl 7H-thieno[2,3-e][1,3]thiazine-carboxylate 11 (Scheme 3) by treatment with aqueous NaOH or during chromatography. The structure of the latter has also been established by X-ray crystallography. In the presence of thiols and alcohols, the reaction of 1a and 2a yields mainly adducts of type 12 (Scheme 4), compounds 5a,7a , and 9a being by-products (Table 1). Reaction mechanisms for the formation of the isolated products are delineated in Schemes 4–7: the primary cycloadduct 3 of the diazo compound and the C?S bond of 1 undergoes a base-catalyzed ring opening of the 1,3-thiazole-ring to give 10 . In the absence of a base, elimination of N₂ yields the thiocarbonyl ylide A ′, which is trapped by nucleophiles to give 12 . Trapping of A ′, by H₂O yields 1,3-thiazole-5(4H)-one 9 and ethyl mercaptoacetate, which is also a trapping agent for A ′, yielding the diester 7 . The formation of products 6 and 8 can be explained again via trapping of thiocarbonyl ylide A ′, either by thiirane C (Scheme 6) or by 2a (Scheme 7). The latter adduct F yields 8 via a Demjanoff-Tiffeneau-type ring expansion of a 1,3-thiazole to give the 1,3-thiazine.     

Folded chain crystals as micro-phases

Summary A thermodynamic treatment of homo-polymer systems out of linear chains with folded chain crystals is developed outgoing from appropriate models for single component systems. An expansion of thermodynamics to multi-micro-phase systems the structure of which is partially or totaly frozen is indispensable. General properties of melt crystallized homopolymers with folded chain crystals can be recognized indeed when the thermodynamic formalisms developed are applied.

---

Zusammenfassung Das Schmelzen in polymeren Einteilchensystemen mit Faltungskristallen einheitlicher Dicke kann thermodynamisch als Umwandlung 1. Ordnung in einer Richtung behandelt werden, wenn die Faltungslänge bis zur Umwandlungstemperatur konstant bleibt (Faltungslänge als innerer Zusatzparameter). Eine wesentliche begriffliche Erweiterung ist für eine phänomenologische Beschreibung mit den Mitteln der Thermodynamik unumgänglich, wenn eine Faltungskristallit-Dickenverteilung existiert, weil dann prinzipiell nur noch partielle Koexistenz bestimmter Fraktionen metastabiler autonomer Mikrophasen mit der Schmelze möglich ist. Partielles Aufschmelzen und Rektistallisation können so dann auch in Betracht genommen werden. Die entwickelten Konzeptionen bewähren sich in der Anwendung auf bekannte Experimente.

---

Notation g ^c (y);g ^m (Y) molar Gibbs-free energy of a chain of a lengthy within an extended chain crystal and the melt rsp - g _o ^c ;g _o ^m molar free enthalpy of the unit in the crystal lattice and the melt rsp - g(y,y, f) molar Gibbs-function of an ideally folded chain crystal with the fold heighty _f - gco(y, y _ef,y _f) molar free enthalpy of the crystal corey _co - g ₀ ^ex ((y_ef) excess free enthalpy of the longitudinal layers of folded chain crystals - g ^f(y_ef,g _o ^ex ) molar free enthalpy of the longitudinal layers of the folded chain crystals - g ^tot molar free enthalpy of a chain of the lengthy within a folded chain crystal with longitudinal layers - h _o ^1c ,h _o ^m molar enthalpy of the chain unit within the crystal lattice and the melt rsp - h =h _o ^m -h _o ^c molar heat of fusion of the unit - C _p=C _p ^m -C _p ^c difference of the molar specific heat of a unit within the melt and within the chain crystal - h ^D molar defect enthalpy of local defects within the crystal lattice - h ^D molar defect enthalpy of the unit - s _o ^c ,s _o ^m molar entropy of the chain unit within the crystal lattice and the melt rsp - s _c ^m conformational entropy of a chain in the melt - s _gk conformational entropy of a chain of lengthy within a super-lattice as indicated in figure 5, - s molar entropy of fusion of the melt - s _n ^c nematic configurational entropy - T absolute temperature - T _M melting temperature of extended chain crystals of infinite size - T _M(y) melting temperature of extended chain crystals containing only chains of the lengthy - T _M (y, y _f) melting temperatureof folded chain crystals of the thicknessy _f composed of chains of the lengthy - T _M(y _f) melting temperature of folded chain crystals of the thicknessy _fy - _eh excess free enthalpy of the chain ends occupying crystallographic places - _ef excess free enthalpy of a single fold loop - z coordination number of the lattice - 7 Euler's constant - R Boltzmann's constant - y number of chain units - y _f height of lamelliform folded chain crystals - f=(y/y _f - 1) number of fold loops of a chain of a lengthy when being built into a folded chain crystal of the thicknessy _f - y _co thickness of the crystal core of the simplified twophase model - y _et average thickness of the surface layers of folded chain crystals - N _c number of crystallized units of a chain of the lengthy - x _c molar number of crystallized units of a chain of the lengthy - x _nc molar number of noncrystallized units - excess free enthalpy parameter - (y _f) thickness distribution of the fold heightsy _f With 15 figures and 2 tables     

Über 1-Alkyl-bzw. 1-Aryl-dihydro-6-methyl-2(1H)-pyrimidinthione

The title compounds7 are formed in a general reaction by heating β-isothiocyanoketones3 with primary amines in inert solvents, or by thermal elimination of water from tetrahydro-6-hydroxy-6-methyl-2(1H)-pyrimidinethiones5, also in inert solvents. The 1-alkyl compounds can also be prepared under similar conditions from α,β-unsaturated ketones by reaction with alkylammonium rhodanides. The NMR-spectra show that the 1-substituted dihydro-6-methyl-2(1H)-pyrimidinethiones are in tautomeric equilibrium with the tetrahydro-6-methylene-2(1H)-pyrimidinethiones13. The reactivity of 1-alkyl and 1-aryldihydro-6-methyl-2(1H)-pyrimidinethiones is similar to that of dihydro-4,4,6-trimethyl-2(1H)-pyrimidinethione7 j, although their ring stability is certainly less.     

Beiträge zur Chemie des Sulfamids, 1. Mitt.: Zur Konstitution des Disilber-sulfamids

According to spectroscopic (IR, broadline proton NMR) and chemical (alkylation) investigations of disilver sulphamide the following molecular structure is assumed: $$\begin{gathered} O \hfill \\ || \hfill \\ H_2 N\_\_S\_\_NAg| \hfill \\ OAg \hfill \\ \end{gathered}$$ From the IR and NMR data deduction concerning the nature of the chemical bonds in this compound is possible. The instability of the still unknown mono-and trisilver sulphamide is discussed with regard to the structure of disilver sulphamide.     

Bortrifluorid-katalysierte Umsetzungen von 3-Amino-2H-azirinen mit Aminosäure-estern und Aminen

Boron-Trifluoride-Catalyzed Reactions of 3-Amino-2H-azirines with Amino-acid Esters and Amines After activation by protonation or complexation with BF₃, 3-amino-2H-azirines 1 react with the amino group of α-amino-acid esters 3 to give 3,6-dihydro-5-aminopyrazin-2(1H)-ones 4 by ring enlargement (Scheme 2, Table 1). The configuration of 3 is retained in the products 4 . With unsymmetrically substituted 1 (R¹ ≠ R²), two diastereoisomers of 4 (cis and trans) are formed in a ratio of 1:1 to 2:1. With β-amino-acid esters 5 and 7 , only openchain α-amino-imidamides 6 and 8 , respectively, are formed, but none of the seven-membered heterocycle (Scheme 3). Primary amines also react with BF₃-complexed 1 to yield α-amino-imidamides of type 9 (Scheme 4, Table 2). Compound 9b is characterized chemically by its transformation into crystalline derivatives 10 and 12 with 4-nitrobenzoyl chloride and phenyl isothiocyanate, respectively (Scheme 5). The structure of 12 is established by X-ray crystallography. Mechanisms for the reaction of activated 1 with amino groups are proposed in Schemes 6 and 7.     

The Cyclohexasilanes Si6H11X and Si6Me11X with X=F,Cl, Br and I: A Quantum Chemical and Raman Spectroscopic Investigation of a Multiple Conformer Problem

The conformers of the monohalocyclohexasilanes, Si₆H₁₁X (X=F, Cl, Br or I) and the haloundecamethylcyclohexasilanes, Si₆Me₁₁X (X=F, Cl, Br or I) are investigated by DFT calculations employing the B3LYP density functional and 6‐31+G* basis sets for elements up to the third row, and SDD basis sets for heavier elements. Five minima are found for Si₆H₁₁X—the axial and equatorial chair conformers, with the substituent X either in an axial or equatorial position—and another three twisted structures. The equatorial chair conformer is the global minimum for the X=Cl, Br and I, the axial chair for X=F. The barrier for the ring inversion is ～13 kJ mol^?1 for all four compounds. Five minima closely related to those of Si₆H₁₁X are found for Si₆Me₁₁X. Again, the equatorial chair is the global minimum for X=Cl, Br and I, and the axial chair for X=F. Additionally, two symmetrical boat conformers are found as local minima on the potential energy surfaces for X=F, Cl and Br, but not for X=I. The barrier for the ring inversion is ～14–16 kJ mol^?1 for all compounds. The conformational equilibria for Si₆Me₁₁X in toluene solution are investigated using temperature dependent Raman spectroscopy. The wavenumber range of the stretching vibrations of the heavy atoms X and Si from 270–370 cm^?1 is analyzed. Using the van′t Hoff relationship, the enthalpy differences between axial and equatorial chair conformers (H_ax?H_eq.) are 1.1 kJ mol^?1 for X=F, and 1.8 to 2.8 kJ mol^?1 for X=Cl, Br and I. Due to rapid interconversion, only a single Raman band originating from the “averaged” twist and boat conformers could be observed. Generally, reasonable agreement between the calculated relative energies and the experimentally determined values is found.     

The two-phase structure of segmented block copoly(ether ester)

The annealing induced morphological changes in isotropic block copoly(etherester)s are investigated by small angle X-ray scattering methods. The observed results are consistent with a lamellar model which is comprised of a crystalline core of thickness 35 to 45 Å, a diffuse boundary zone of width 9 Å, and an amorphous layer which is varying strongly in thickness. The enhanced crystallinity of the samples annealed at higher temperatures is mainly due the lateral growth of the lamellae; the long period increases by not more than 20%. The scattering power of the samples is explained by means of an equivalent two-phase model in which the crystalline phase has the same structure as theα-form of poly(butylene terephthalate), whereas the amorphous phase is a mixture of the uncrystallized ester segments and the ether segments. The crystallinity determined from the scattering power is very much higher than that determined from thermoanalytical investigations.     

Detection of genetically modified corn (Bt176) in spiked cow blood samples by polymerase chain reaction and immunoassay methods

The fate of DNA and protein transgenic sequences in products derived from animals fed transgenic crops has recently raised public interest. Sensitive molecular tests targeting the Bt176 genetic construct and the transgenic Cry1Ab protein were developed to determine whether plant sequences, especially transgenic sequences, are present in animal products. A protocol for total DNA extraction and purification from cow whole blood samples was first drawn up and assessed by spiking with known amounts of DNA from Bt176 maize. The limit of detection for transgenic sequences (35S promoter and Bt176-specific junction sequence) was determined by both the polymerase chain reaction-enzyme-linked immunosorbent assay (PCR-ELISA) and the 5'-nuclease PCR assay. Four additional PCR systems were built to substantiate the results. The first detects a mono-copy maize-specific sequence (ADH promoter). Two others target multi-copy sequences from plant nucleus (26S rRNA gene) and chloroplast (psaB gene). The last one, used as a positive control, targets a mono-copy animal sequence (alpha(s1)-casein gene). Both methods detected a minimum spiking at 25 copies of Bt176 maize/mL in 10 mL whole blood samples. The sandwich ELISA kit used detected down to 1 ng transgenic Cry1Ab protein/mL spiked whole blood.