Teaching analytical properties

A new way of expounding analytical properties based on their mutual dependence (complementary and contradictory relationships) and their unequivocal connection with analytical quality facets is presented. To this end, the paper provides answers to the obvious questions that arise in dealing with the subject: why?, how?, when? and where to teach analytical properties in the Analytical Chemistry curriculum?     

Strength of cylinder joint adhesively bonded by coupling

Summary A method of joining two metal cylindrical shafts with adhesive coupling is proposed. Two cylindrical shafts with the same diameter are connected by bonding through a cylindrical coupling with epoxy resin. The strength of the shaft joint under tensile loading and torsional loading is investigated analytically and experimentally. The stress and strain distributions of the shaft joint is analyzed by the finite element method. The analyzed strain distributions in the joint are compared with experimental values. The joint strength is predicted by applying the strength laws of shafts, coupling, adhesive layer and adhesive interface between shaft and adhesive coupling. The effects of the coupling dimension on the joint strength are examined. It is shown that the adhesive shaft joint can transfer the load by which the cylindrical shafts are plastically deformed.This paper was refined by the author, K. Ikegami, during statying at Technische Universität München under the support of Deutscher Akademischer Austauschdients. The author is grateful to Professor Lippmann of Technische Universität München who is the host professor of the support.     

Book reviews

Ohne Zusammenfassung

---

Book reviews

     

Influence of solute mobility on dislocation motion I. Basic model

Dislocation motion in the real lattice of alloys is highly complex. In a certain temperature range the dynamic strain ageing phenomena have been reported. In this paper the influence of mobile solute atoms (as obstacles) on the motion of dislocation is analysed. Both processes are assumed to be thermally activated. A new model based on this assumption is proposed. The dislocation velocity and the friction stress (due to solute-dislocation interactions) are calculated. A change in the friction stress caused by solute mobility is discussed.     

On the concentration and determination of plutonium in natural waters by adsorption on MnO2 filters

A new method of analysis of the efficiency of four filters of MnO₂ in series which takes into account the reactions induced in plutonium by the sorbent is described. The system of differential equations describing the behaviour of plutonium in water as it passes through the filters is solved and the parameters of the filters are determined for a best fitting of the solutions corresponding to the experimental uncertainties. The method is checked by numerical simulation and then applied to water solutions with a known plutonium concentration and to some experimental results given by other authors. In all occassions the results are consistent with the possibility of determining the contents of plutonium in sea and continental waters with uncertainties of the order of 10%.     

Effect of pH and gaseous ammonia flow rate on the composition and structure of ammonium uranate

Ammonium uranate was precipitated from uranyl nitrate solution using gaseous ammonia, then filtered, washed with demineralized water and dried. The influence of pH and ammonia flow rate on their composition and structure were examined by X-ray diffraction analysis, making use of additional information obtained from infrared analysis.     

Preconcentration of trace antimony in tap and sea water on activated alumina. Determination by graphite furnace atomic absorption spectrometry

Summary A method is described for antimony preconcentration based on retention on a column of activated alumina. Recovery is 80% when no pH-control and 4 mol/l HCl as eluent are used. The preconcentration factor is 400. The method was applied to the determination of antimony in spiked tap and sea water. The analytical performance of the method is discussed.     

Improvement of the properties of polyarylate reinforced with liquid crystalline polymers

Blends of polyarylate of bisphenol A, PAr, with two commercial main chain liquid crystalline polymers, Vectra A950 and Vectra B950, are studied. From dynamic viscoelastic measurements it is deduced that both systems (PAr/Vectra A950 and PAr/Vectra B950) are immiscible and scanning electron microscopy (SEM) micrographs show the presence of spherical domains of the liquid crystalline polymer when PAr constitutes the matrix. Extrusion capillary measurements reveal that, under conditions of temperature and shear rate similar to those of processing, the viscosity is reduced to approximately 10% of its value when the content of liquid crystalline polymer is only 20%. This great improvement of the rheological properties is observed in both PAr/Vectra A950 and PAr/Vectra B950 blends. The effect of draw ratio on Young's modulus for different compositions is also analyzed, pointing out the reinforcing action of both liquid crystalline polymers on polyarylate: for instance, 20% of Vectra B950 in the blend gives rise to a 700% increase of the modulus of fibres prepared at a draw ratio of 50. SEM of the extrudates reveals that the spherical domains are elongated at the entrance of the capillary giving rise to a microfibrillar morphology which is related to the excellent rheological and mechanical properties of the blends.     

General base catalysis in the decomposition of N-Cl-Valine in aqueous solution

This article analyzes the kinetics of the decomposition of N-Cl-Valine in aqueous solution, which is formed rapidly by chlorination of Valine with sodium hypochlorite. A general-base catalyzed process not yet described is reported. The experimental evidence shows two competitive decomposition paths: an unimolecular concerted fragmentation process (k = (1.8 ± 0.1) · 10^?4 s^?1 at 298 K) and the other one is an E2 elimination process whose importance increases with pH and depends on the nature and the concentration of the bases present in the medium. © 1994 John Wiley & Sons, Inc.