Sulfonated poly(ether ether ketone)/poly(amide imide) polymer blends for proton conducting membrane

Poly(amide imide) (PAI) was synthesized using 1,2,4-benzenetricarboxylic anhydride (BTBA) and 4,4′-methylenebis(phenyl isocyanate) (MBPI). SPEEK/PAI blend membranes were prepared and investigated by NMR, GPC, FT-IR and AFM. The chemical structures of PAI and SPEEK were characterized by using NMR and FT-IR. The adsorption of the SPEEK/PAI blend membrane of water or methanol solution was also characterized. The significant swelling of the blend membrane in concentrated methanol solution was explained by the solubility parameter. The water diffusion coefficient (D_H2O) was related to the lambda value of the membrane. The SPEEK/PAI blend membrane had a lower proton conductivity and methanol permeability than Nafion. However, the relative selectivity (proton conductivity divided by methanol permeability) of the SPEEK/PAI 70/30 (w/w) blend membrane was 3.46 × 10⁴ S s cm⁻³, which is closed to that of Nafion (3.30 S s cm⁻³).     

Reaction of methyl 4-nitrobenzenesulfonate with Br- in water-formamide tetradecyltrimethylammonium bromide micellar solutions

Summary The reaction methyl 4-nitrobenzenesulfonate + Br^- was studied in water-formamide tetradecyltrimethylammonium bromide micellar solutions. A pseudophase kinetic model was used to quantitatively rationalize the kinetic micellar effects observed     

The exo-selectivity of the new non-natural chiral auxiliary (+)-(1R,endo)-2-benzonorbornenol in an asymmetric aza-Diels-Alder reaction

The recently reported compound (+)-(1R,endo)-2-benzonorbornenol (2) proved to be an efficient chiral auxiliary in the asymmetric aza-Diels-Alder reaction between cyclopentadiene and the N-benzyl imine of its glyoxylate, which afforded a virtually all-exo mixture of cycloaducts with a 1S:1R diastereomeric ratio of 63:37.     

Measurement of labile Cu in soil using stable isotope dilution and isotope ratio analysis by ICP-MS

Isotope dilution is a useful technique to measure the labile metal pool, which is the amount of metal in soil in rapid equilibrium (<7 days) with the soil solution. This is normally performed by equilibrating soil with a metal isotope, and sampling the labile metal pool by using an extraction (E value), or by growing plants (L value). For Cu, this procedure is problematic for E values, and impossible for L values, due to the short half-life of the ⁶⁴Cu radioisotope (12.4 h), which makes access and handling very difficult. We therefore developed a technique using enriched ⁶⁵Cu stable isotope and measurement of ⁶³Cu/⁶⁵Cu ratios by quadrupole inductively coupled plasma mass spectrometry (ICP-MS) to measure labile pools of Cu in soils using E value techniques. Mass spectral interferences in detection of ⁶³Cu/⁶⁵Cu ratios in soil extracts were found to be minimal. Isotope ratios determined by quadrupole ICP-MS compared well to those determined by high-resolution (magnetic sector) ICP-MS. E values determined using the stable isotope technique compared well to those determined using the radioisotope for both uncontaminated and Cu-contaminated soils.     

Modeling deoxyribose radicals by neutralization-reionization mass spectrometry. Part 1. Preparation,dissociations, and energetics of 2-hydroxyoxolan-2-yl radical,neutral isomers,and cations

Collisional neutralization of several isomeric C(4)H(7)O(2) cations is used to generate radicals that share some structural features with transient species that are thought to be produced by radiolysis of 2-deoxyribose. The title 2-hydroxyoxolan-2-yl radical (1) undergoes nearly complete dissociation when produced by femtosecond electron transfer from thermal organic electron donors dimethyl disulfide and N,N-dimethylaniline in the gas phase. Product analysis, isotope labeling ((2)H and (18)O), and potential energy surface mapping by ab initio calculations at the G2(MP2) and B3-PMP2 levels of theory and in combination with Rice-Ramsperger-Kassel-Marcus (RRKM) kinetic calculations are used to assign the major and some minor pathways for 1 dissociations. The major (approximately 90%) pathway is initiated by cleavage of the ring C-5[bond]O bond in 1 and proceeds to form ethylene and *CH(2)COOH as main products, whereas loss of a hydrogen atom forms 4-hexenoic acid as a minor product. Loss of the OH hydrogen atom forming butyrolactone (2, approximately 9%) and cleavage of the C-3[bond]C-4 bonds (<1%) in 1 are other minor pathways. The major source of excitation in 1 is by Franck-Condon effects that cause substantial differences between the adiabatic and vertical ionization of 1 (5.40 and 6.89 eV, respectively) and vertical recombination in the precursor ion 1(+) (4.46 eV). (+)NR(+) mass spectra distinguish radical 1 from isomeric radicals 2-oxo-(1H)oxolanium (3), 1,3-dioxan-2-yl (9), and 1,3-dioxan-4-yl (10) that were generated separately from their corresponding ion precursors.     

Determination of bismuth, indium and lead in geological samples by electrothermal AAS Part 2. Comparative study of palladium and molybdenum containing chemical modifiers*

A comparative and systematic study has been carried out of the effects of palladium and molybdenum containing chemical modifiers, such as Pd + Rh, Pd + Pt, Pd + Ru, Pd + Rh + Pt, Pd + Rh + Ru, Mo + Pd, Mo + Rh, Mo + Ru and Mo + Pt and additionally tartaric acid (TA) as a reducing agent together with mixed modifiers for the thermal stabilization of Bi, In and Pb in a Zeeman electrothermal atomic absorption spectrometer (ETAAS). The effect of the mass ratios of the mixed modifier components on the maximum pretreatment temperature for the analytes has been determined. The modifier mixtures of Pd + Rh + Pt, Mo + Pd + TA and Mo + Pt + TA were found to be especially powerful for the determination of Bi, In and Pb. These mixed modifiers could increase the ashing temperatures of the analytes up to 1250–1400° C. They were applied to the determination of Bi and Pb in dissolved geological reference samples and accuracy and precision of the method were thereby enhanced. The percent relative error was decreased from 20.0 to 0.4 for Bi and from 10.5 to 0.3 for Pb, depending on the sample type. Received: 9 May 1997 / Revised: 19 August 1997 / Accepted: 20 August 1997     

Complexation of well-controlled low-molecular weight polyelectrolytes with antisense oligonucleotides

The influences of polymer-related properties such as molecular weight, charge density, counter ion, and hydrophilic block on the complexation of polyelectrolytes and a fluorescein-labeled oligonucleotide (ON) were investigated. A series of well-defined and well-controlled 2-(N,N-dimethylamino)ethyl methacrylate (DMAEMA) polymers and block copolymers were prepared using living anionic and radical polymerization methods. Fluorescence measurement was used to reveal the effects of polymer molecular weight, charge density, and counter ion type on the complexation. PolyDMAEMA samples having double molecular weights of the chosen oligonucleotide gave the optimal complexation performance. Kinetic studies showed that high-molecular weight/high-charge density polymer samples produced very stable complexes. The fully charged polyDMAEMA displayed the strongest binding with the ON. These complexes were therefore less sensitive to the changes in the environment. PolyDMAEMA–DMSQ samples had slightly higher complexation ability than polyDMAEMA–MCQ (DMSQ: dimethylsulfate quat; MCQ: methylchloride quat). Both poly(DMAEMA-b-HEMA) and poly(DMAEMA–MCQ-b-PEG) block copolymers showed good complexation ability and steric stability [HEMA: 2-hydroxyethyl methacrylate; PEG: poly(ethylene glycol)]. PEG, but not HEMA block, enhanced the effectiveness of polyDMAEMA–MCQ binding with the ON.     

C-H...N and C-H...S hydrogen bonds--influence of hybridization on their strength

Simple complexes connected through C-H...S and C-H...N interactions are investigated: CH4...NH3, C2H4...NH3, C2H2...NH3, CH4...SH2, C2H4...SH2, and C2H2...SH2. Ab initio and DFT calculations are performed (SCF, MP2, B3LYP) using different basis sets up to the MP2/aug-cc-pVQZ//MP2/aug-cc-pVDZ level of approximation. The Bader theory is applied since MP2/6-311++G(d,p) wave functions are used to find and to characterize bond critical points in terms of electron densities and their Laplacians. The influence of hybridization on the properties of C-H...S and C-H...N systems is also studied showing that the strength of such interactions increases in the following order: C(sp3)-H...Y, C(sp2)-H...Y, C(sp)-H...Y, where Y = S, N--it is in line with the previous findings on C-H...O hydrogen bonds. The results also show that CH4...SH2 and C2H4...SH2 complexes should be rather classified as van der Waals interactions and not as hydrogen bonds. The frequency associated with the C-H stretch of C(sp3)-H...S is blue-shifted.     

Copper(I) hexafluoroantimonate - an example of a compound with Cu in a solely fluorine environment

Yellow-orange single crystals of CuSbF₆, were prepared by reacting Cu wire (∼10 mmol) with SbF₅ (∼3 mmol) in liquid anhydrous hydrogen fluoride (aHF) and by reduction of Cu(SbF₆)₂ with Cu metal in aHF. CuSbF₆ crystallizes rhombohedral at 296 K with the LiSbF₆ structure type, with a = 530.4(4) pm, c = 1453(1) pm and Z = 3, space group R (no. 148). The structure is dominated by isolated layers of regular [SbF₆]⁻ octahedra and Cu⁺ cations.An attempt to prepare CuF by reaction between CuSbF₆ and CsF in aHF at ∼190 K failed. Instead of CuF, a mixture of Cu and CuF₂ was obtained.     

Simultaneous liquid chromatographic determination of seventeen of the major monoamine neurotransmitters, precursors and metabolites. I. Optimization of the mobile phase using factorial designs and a computer program to predict chromatograms

Utilizing reversed-phase high-performance liquid chromatography (HPLC) with electrochemical detection and optimization of the mobile phase using factorial designs and a constructed computer program to predict chromatograms, it has been possible to obtain a satisfactory resolution of seventeen of the major monoamine neurotransmitters, precursors and metabolites. A rapid (less than 25 min) isocratic system for the simultaneous determination of 3,4-dihydroxyphenylalanine, dopamine, dihydroxyphenylacetic acid, 3-methoxytyramine, homovanillic acid, norepinephrine, normetanephrine, 3,4-dihydroxyphenylethylene glycol, 3-methoxy-4-hydroxyphenylethylene glycol, epinephrine, metanephrine, vanillylmandelic acid, 5-hydroxytryptophan, serotonin, 5-hydroxytryptophol and 5-hydroxyindoleacetic acid in addition to the internal standard isoproterenol is presented. The optimization strategy included selection of variables to optimize by a reduced factorial design a detailed study of these variables by a complete factorial design, theoretical predictions of chromatograms by a constructed computer program and test on the HPLC system. This optimization strategy can easily be applied to any problem of solute separation by liquid chromatography.