Die Ringinversions-Barriere in [2.2]Metacyclophan

From racemization studies on optically active [2.2]metacyclophanes substituted in position 4, the parameters of activation for the inversion of the tenmembered ring were found to be: G ₄₂₃ =31.5 kcal/mole, H =27.5 kcal/mole and S =–10 Cl/mole.Racemization does not occurvia bond forming or breaking; the value for the inversion barrier is not affected by substituents in position 4 and therefore corresponds to the value of unsubstituted [2.2]metacyclophane, whereas substituents in the bridge exert a distinct influence. These results can easily be explained on the basis of the isoconformational concept.

---

---

Mit 5 Abbildungen

---

Herrn Prof. Dr.O. Hoffmann-Ostenhof mit besten Wünschen zum 60. Geburtstag gewidmet.     

Strukturviskosität von verdünnten Lösungen von Biopolymeren

The importance of the rheological behaviour of solutions of macromolecules is briefly evaluated. The viscosity of the solutions depends on concentration, shear rate and time of shear, this relation being determined by the structure of the dissolved molecules. In dilute solutions shear dependence of viscosity is very frequently caused by the preferential orientation of anisotropic molecules. In such a case the particle dimensions can be calculated from the true limiting viscosity number, an anisotropy factor, the rotational diffusion constant and the effective particle density. These numbers can be derived from the flow curve, which has been extrapolated to zero concentration. It is necessary to measure the flow curve at shear gradients, which are sufficiently low to allow for an extrapolation to vanishing shear rate. By comparing the experimental flow curve with a choice of theoretical ones, the rotational diffusion constant and the anisotropy factor (axial ratio) can be found. From the limiting viscosity number and the axial ratio, the particle density can be calculated.     

Special Mixing Behavior of Chelate-based Ionic Liquid with Methanol

Compared to the general ionic liquids (ILs), a significant deviation of the binary mixtures of 1-decyl-3-methylimidazolium tri(hexafluoroacetylaceto)-copper(II) ([C₁₀mim][Cu(hfacac)₃]) with methanol was found, indicating the way methanol interacts with ILs might be governed by the special structure of the chelating anion. IR results showed that the (C2-H) of 1-decyl-3-methylimidazolium hexafluoroacetylacetonate ([C₁₀mim][hfacac]) blue-shifted more significantly than that of [C₁₀mim][Cu(hfacac)₃], meanwhile the (C=O) red-shifted in [C₁₀mim][Cu(hfacac)₃], which is contrast with that in [C₁₀mim][hfacac]. Two-dimensional correlation analysis of the FTIR spectra indicated that the chelating cavity has little effect on the sequence of the ILs sites that interact with methanol. Combined with small angle X-ray scattering (SAXS) results, the picture of mixing processes in these two systems were proposed. Methanol interacts directly with the anion followed by the cation in [C₁₀mim][hfacac], while methanol preferentially enters the chelating cavity and enhances the packing effect in the [C₁₀mim][Cu(hfacac)₃] system.     

Optimization of the process parameters of synthesis of vinblastine imprinted polymer

Molecularly imprinted polymers (MIPs) are tailor-made polymers with high selectivity for the template molecule. This selectivity arises from the synthetic procedure followed to prepare the MIP. In this work, the influence of process parameters on the preparation of vinblastine (VLB) imprinted polymers was presented. In the procedure of polymerization, VLB (0.1 mmol) was used as the template molecule and a commonly used initiator, azobisisobutyronitrile (AIBN), was employed to initiate the reaction at 60 °C. The influence of the following parameters was investigated: the moles of functional monomer (MAA, 0.3-1.0 mmol), the moles of cross-linker (EDMA, 1.5-5.0 mmol) and the porogenic solvent (toluene or acetonitrile). A mathematical method of uniform design was applied to optimize these selected parameters in order to increase the selectivity of MIP for template molecule. The experimental data were analyzed to obtain the regression model and the optimal conditions were achieved by optimization with uniform design software. The MIP was synthesized under the optimal conditions that 1.0 mmol of MAA and 5.0 mmol of EDMA copolymerized in toluene in the presence of 0.1 mmol of VLB. After removal of the template molecule, the obtained MIP was then employed as the sorbents of solid-phase extraction (SPE) to separate VLB from Catharanthus roseus extract. The results showed that the polymer exhibited high affinity to the template molecule and could separate and enrich VLB from C. roseus extract effectively. The recovery of VLB on the optimal MIP was 89.00%, which agreed closely with the predicted recovery. Therefore it is possible to further improve the nature of the polymer by optimizing the polymerization parameters with the method of uniform design.     

Helical structures architecture of l-{2-(4-hydroxy-phenyl)-1-[(pyren-1-ylmethyl)-carbamoxyl]-ethyl}-carbamic acid tert-butyl ester

A new pyrenemethylamine substituted l-Boc-tyrosine derivative was synthesized and characterized. UV-vis, FL, CD, and light scattering experiments proved that the chiral molecules were able to self-assemble for formation of new aggregate structure. The SEM and AFM images indicated that the helical wires could be fabricated by π-π stacking interaction between adjacent pyrene molecules.     

Komplexe von 2,6-Dimethylpyridin-1-oxid mit Lanthanidjodiden

Complexes of 2,6-dimethylpyridine 1-oxide with lanthanide iodides of the formulaeLn(2,6-LTNO)₅I₃ whereLn=La, Tb and Yb,Ln(2,6-LTNO)₄I₃ whereLn=Pr and Nd and Er(2,6-LTNO)_4.5I₃ have been prepared and characterised by chemical analysis, infrared and conductance studies. Infrared and conductance data have been interpreted in terms of dimeric (or polymeric) structures involving bridging amine oxide groups.

---

---

Mit 2 Abbildungen     

Über die Synthese von 5-(o-Trifluormethylphenyl)-1H-thieno[3,4—e]-1,4-diazepin-2(3H)-onen

The synthesis of 5-(o-trifluoromethylphenyl)-1H-thieno-[3,4-e]1,4-diazepin-2(3H)-one (7) and its nitration and chlorination in pos. 8 are described.     

[{Cu(phen)2}(μ‐malato){Cu(phen)(NO3)}](NO3)·4H2O: malate acting as a tetra­dentate and dibridging ligand in a dinuclear copper complex

The crystal structure of the title compound, μ‐2‐hydroxy­butane­dioato‐1κ²O⁴,O^4′:2κ³O¹,O²,O⁴‐nitrato‐2κO‐tris­(1,10‐phen­anthroline)‐1κ⁴N,N′;2κ²N,N′‐dicopper(II) nitrate tetra­hydrate, [Cu₂(C₄H₃O₅)(NO₃)(C₁₂H₈N₂)₃](NO₃)·4H₂O, contains an unsymmetrical dinuclear copper complex with Cu(phen)₂ and Cu(phen)(NO₃) moieties (phen is 1,10‐phenanthroline) bridged by a malate (2‐hydroxy­butane­dioate) ligand, which acts as a double‐bridging and tetra­dentate ligand. As a result of this double‐bridging action, especially the direct coordination of the O atom of one carboxyl­ate group of malate to the two Cu atoms, the Cu⋯Cu distance is only 4.199 (1) Å and the two phen planes are roughly parallel [the shortest inter­planar distance is 3.28 (1) Å], exhibiting an obvious intra­molecular π–π stacking inter­action.     

超临界反应条件下Y型分子筛催化剂失活的研究

对苯烷基化过程中Ｙ型分子筛催化剂的失活进行了多方面的实验研究。结果表明，超临界条件下该催化剂的活性寿命比液相条件下长达四倍以上，借助色－质谱联用机分析两种操作的反应产物，发现含有多环物质，并且它们的种类和数量随条件而不同。根据热力学原理，建立了多环物在超蚧流体中的溶解模型，并以并四苯，并五苯和并六苯作为焦前物模拟物进行了计算。     

Berechnung von mittleren Schwingungsamplituden einiger tetraedrischer Moleküle und Ionen nach der Methode der charakteristischen Schwingungen

Mean amplitudes of vibration of a series of tetrahedralXY ₄ molecules and ions (hydrides, halides, oxides and oxoanions) have been calculated using the “Method of the Characteristic Vibrations” ofA. Müller. The results indicate that this method leads to very good values for most of the investigated species, and especially in the cases of highM _X/M_Y mass ratio.