Effects of Calcination Temperature on the Acidity and Catalytic Performances of HZSM-5 Zeolite Catalysts for the Catalytic Cracking of n-Butane

The acidic modulations of a series of HZSM-5 catalysts were successfully made by calcination at different treatment temperatures, i.e. 500, 600, 650, 700 and 800 ℃, respectively. The results indicated that the total acid amounts, their density and the amount of B-type acid of HZSM-5 catalysts rapidly decreased, while the amounts of L-type acid had almost no change and thus the ratio of L/B was obviously enhanced with the increase of calcination temperature (excluding 800 ℃). The catalytic performances of modified HZSM-5 catalysts for the cracking of n-butane were also investigated. The main properties of these catalysts were characterized by means of XRD, N2 adsorption at low temperature, NH3-TPD, FTIR of pyridine adsorption and BET surface area measurements. The results showed that HZSM-5 zeolite pretreated at 800 ℃ had very low catalytic activity for n-butane cracking. In the calcination temperature range of 500-700 ℃, the total selectivity to olefins, propylene and butene were increased with the increase of calcination temperature, while, the selectivity for arene decreased with the calcination temperature.The HZSM-5 zeolite calcined at 700 ℃ produced light olefins with high yield, at the reaction temperature of 650 ℃ the yields of total olefins and ethylene were 52.8% and 29.4%, respectively. Besides, the more important role is that high calcination temperature treatment improved the duration stability of HZSM-5zeolites. The effect of calcination temperature on the physico-chemical properties and catalytic performance of HZSM-5 for cracking of n-butane was explored. It was found that the calcination temperature had large effects on the surface area, crystallinity and acid properties of HZSM-5 catalyst, which further affected the catalytic performance for n-butane cracking.     

Electrochemical Behavior and Determination of Uric Acid at Single-Walled Carbon Nanotube Modified Gold Electrodes

The voltammetric behavior of uric acid was studied at a single-walled carbon nanotube (SWNT) modified gold electrode. Uric acid can effectively accumulate at this electrode and produce an anodic peak at about 0.45 V (vs. SCE) in pH 5.0 sodium acetate buffer solutions (HAc-NaAc). The experimental parameters, such as solution pH, accumulation time, and amount of SWNT, were optimized for determination. Under the optimum conditions, the anodic peak current is linear to the uric acid concentration over the range of 1.0×10⁻⁷ M to 2.5×10⁻⁵ M with a correlation coefficient of 0.998. The detection limit was 5.0×10⁻⁸ M for 60 s accumulation. The electrode could be easily regenerated and exhibited good stability. A 5.0×10⁻⁶ M uric acid solution was measured ten times using the same electrode, and the relative standard deviation of the peak current was 1.3%. This method was successfully applied to the determination of uric acid in human urine samples, and the recovery was 97–99%. The feasibility for simultaneous determination of xanthine, ascorbic acid and uric acid was discussed. These species did not interfere with each other in a certain concentration range. The influence of some surfactants on the anodic peak was also examined.     

An unprecedented 8-fold interpenetrating diamondoid-like coordination polymer containing a Cu+(4)(RCO2)(4) cluster as connecting node

The reaction of Cu(I)(CH(3)CN)(4)BF(4) with 4-pyridylacrylic acid (4-HPYA) affords an unprecedented 8-fold interpenetrating diamondoid-like coordination polymer network [Cu(I)(3)(4-PYA)(2)(H(2)O)(BF(4)) ] (1) with a Cu(+)(4)(CO(2))(4) cluster as connecting node. The interpenetration in metal coordination polymers is the highest degree ever found within diamondoid nets containing a cluster as connecting note. Its fluorescent property was also reported.     

Low‐Temperature Facile Template Synthesis of Crystalline Inorganic Composite Hollow Spheres

This report presents a facile approach for the low‐temperature synthesis of crystalline inorganic‐oxide composite hollow spheres by employing the bulk controlled synthesis of inorganic‐oxide nanocrystals with polymer spheres as templates. The sulfonated polystyrene gel layer can adsorb the target precursor and induce inorganic nanocrystals to grow on the template in situ. The crystalline phase and morphology of the composite shell is tunable. By simply adjusting the acidity of the titania sol, crystalline titania composite hollow spheres with tunable crystalline phases of anatase, rutile, or a mixture of both were achieved. The approach is general and has been extended to synthesize the representative perovskite oxide (barium and strontium titanate) composite hollow spheres. The traditional thermal treatment for crystallite transformation is not required, thus intact shells can be guaranteed. The combination of oxide properties such as high refractive index, high dielectric constant, and catalytic ability with the cavity of the hollow spheres is promising for applications such as opacifiers, photonic crystals, high‐κ‐gate dielectrics, and photocatalysis.     

Sensitive Voltammetric Response of p‐Nitroaniline on Single‐Wall Carbon Nanotube‐Ionic Liquid Gel Modified Glassy Carbon Electrodes

An ionic liquid (i.e., 1‐butyl‐3‐methylimidazolium hexafluorophosphate, BMIMPF₆)‐single‐walled carbon nanotube (SWNT) gel modified glassy carbon electrode (BMIMPF₆‐SWNT/GCE) is fabricated. At it the voltammetric behavior and determination of p‐nitroaniline (PNA) is explored. PNA can exhibit a sensitive cathodic peak at ?0.70 V (vs. SCE) in pH 7.0 phosphate buffer solution on the electrode, resulting from the irreversible reduction of PNA. Under the optimized conditions, the peak current is linear to PNA concentration over the range of 1.0×10^?8–7.0×10^?6 M, and the detection limit is 8.0×10^?9 M. The electrode can be regenerated by successive potential scan in a blank solution for about 5 times and exhibits good reproducibility. Meanwhile, the feasibility to determine other nitroaromatic compounds (NACs) with the modified electrode is also tested. It is found that the NACs studied (i.e., p‐nitroaniline, p‐nitrophenol, o‐nitrophenol, m‐nitrophenol, p‐nitrobenzoic acid, and nitrobenzene) can all cause sensitive cathodic peaks under the conditions, but their peak potentials and peak currents are different to some extent. Their peak currents and concentrations show linear relationships in concentration ranges with about 3 orders of magnitude. The detection limits are 8.0×10^?9 M for p‐nitroaniline, 2.0×10^?9 M for p‐nitrophenol, 5.0×10^?9 M for o‐nitrophenol, 5.0×10^?9 M for m‐nitrophenol, 2.0×10^?8 M for p‐nitrobenzoic acid and 8.0×10^?9 M for nitrobenzene respectively. The BMIMPF₆‐SWNT/GCE is applied to the determination of NACs in lake water.     

Synthesis and Spectroscopic Characterization of New Lead(II) Thiosaccharinates. Molecular Structure of Bis(thiosaccharinato)tetrakis(pyridine)dilead(II) and Thiosaccharinato‐bis(1,10‐phenantroline)lead(II) Thiosaccharinate

Four new lead(II) thiosaccharinate complexes: [Pb(tsac)₂H₂O] (1) (tsac: thiosaccharinate anion), [Pb₂(tsac)₄(py)₄] (2) (py: pyridine), [Pb(tsac)(o‐phen)₂](tsac)·CH₃CN (3) (o‐phen: 1,10‐phenantroline), and [Pb(tsac)₂(bipy)] (4) (bipy: 2,2′‐bipyridine) were prepared. The infrared and electronic spectra as well as the thermal analysis of all the compounds were recorded and discussed. The thiosaccharinate anion acts in three different coordination forms, one of then reported for the first time. The crystal structures of complexes 2 and 3 have been determined by single crystal X‐ray diffractometry. In complex 2 , two monomeric moieties are joined together forming a symmetric bis‐μ‐sulphur bridged dimer by interaction of two lead(II) atoms through the exocyclic sulphur atoms of two thiosaccharinate ligands. The seven‐fold coordination sphere of each lead atom is completed by two pyridine nitrogen atoms and by another sulfur and two nitrogen atoms of the thiosaccharinate anions. In complex 3 , the lead(II) atom is coordinated by four nitrogen atoms of two 1,10‐phenantroline molecules and by the sulfur and nitrogen atoms of one thiosaccharinate ion. The second anion has an electrostatic interaction with the nucleus.     

Structural and Spectroscopic Studies of Halocuprate(I) and Haloargentate(I) Complexes [M2XnX′4−n]2−

The complexes [Cu₂Br₄]^2?, [Cu₂I₄]^2?, [Cu₂I₂Br₂]^2?, [Cu₂I₃Cl]^2?, [Ag₂Cl₄]^2? have been characterized as their isomorphous bis(triphenylphosphoranylidene)ammonium ([Ph₃PNPPh₃]⁺ = PNP⁺) salts by single crystal structural determinations. All anions show the centrosymmetric doubly halogen‐bridged forms [XM(μ‐X)₂MX]^2? with three‐coordinate metal atoms that have been observed in [M₂X₄]^2? complexes with other large organic cations. In [Cu₂I₂Br₂]^2? the iodide ligands occupy the bridging positions and the bromide the terminal positions, while in [Cu₂I₃Cl]^2?, obtained in an attempt to prepare [Cu₂I₂Cl₂]^2?, two of the iodide ligands occupy the bridging positions with the third iodide and the chloride ligand occupying two statistically disordered terminal positions. In [Ag₂Cl₄]^2? the distortion from ideal trigonal coordination of the metal atom is greater than in the copper complexes, but less than in other previously reported [Ag₂Cl₄]^2? complexes with organic cations. The ν(MX) bands have been assigned in the far‐IR spectra, and confirm previous observations regarding the unexpectedly simple IR spectra of [Cu₂X₄]^2? complexes.     

DABCO-catalyzed reactions of hydrazones with activated olefins

This paper describes several highly efficient DABCO-catalyzed aza-Michael addition reactions of hydrazones to activated olefins. In most cases, these aza-Michael addition reactions gave the corresponding products in high yields under mild conditions. The plausible reaction mechanism is discussed on the basis of deuterium labeling experiments. Upon treatment with HCl, the corresponding cyclized products can be obtained in high yields from the Michael addition products.     

Applications of homemade kit in mutation detection of genes

With the accomplishment of Human Genome Project (HGP), single nucleotide polymorphism (SNP) and mutation detection in human genome are becom-ing a new researching focus. These researches can help us to understand the phenotype diversity of indi-vidual, disease susceptibility and drug resistance of different colonies. Traditional method used for muta-tion detection is slab gel electrophoresis, which re-mains labor-intensive and time-consuming because of the requirement of radioactivity or te…     

Determination of Dopamine in the Presence of Ascorbic Acid Using a Poly(Amidosulfonic Acid) Modified Glassy Carbon Electrode

A glassy carbon electrode (GCE) was modified with electropolymerized films of amidosulfonic acid in pH 7.0 phosphate buffer solution (PBS) by cyclic voltammetry (CV). The modified electrode showed an excellent electrocatalytical effect on the oxidation of dopamine (DA). In pH 7.0 PBS, the anodic peak current increased linearly with the concentration of DA in the range of 5.0×10^–7 1.0×10^–4moldm^–3, with a correlation coefficient of 0.9932, and a detection limit (S/N=3) of 1.0× 10^–7moldm^–3. The relative standard deviation of 10 successive scans was 2.5% for 1.0×10^–6moldm^–3 DA. The interference of ascorbic acid (AA) with the determination of DA could be eliminated because of the very distinct attracting interaction between DA cations and the negatively poly(amidosulfonic acid) film in pH 7.0 PBS. The proposed method exhibited good recovery and reproducibility.