Neue Wege der Analytik durch Kombination der direkten quantitativen Dünnschicht-Chromatographie mit elektronischer Datenverarbeitung

A computer program for direct evaluation of thin-layer chromatograms, which already was described earlier [3] has been tested with a laboratory and some technical formulations of a pesticide. Results have been compared with those obtained by two conventional methods. Mean relative standard deviation calculated from results compiled by electronic data processing (method A) is about 6%, compared to 10% received by graphic method (method C) which is employed by most investigators. In addition, overall time of analysis is 34% higher if graphic method is used. Method A saves time and expense especially in routine analysis because working of the process is easier and may be performed even by assistent personal. The proposed method is suitable for the determination of different active ingredients and impurities even in difficult technical products.     

Chemical thermodynamics

The curing of composition containing epoxy bond is complicated chemical and technological process where under temperature and pressure conditions a change of its structure occurs. The structure changes are possible to know by thermal methods as DSC, DTA, etc. and also by measurement of dielectrical response under the low frequency electrical field.     

Isolation and Structural Characterization of Di‐ and Tetra‐protonated Forms of the Macrocyclic Hexaamine trans‐6,13‐Dimethyl‐1,4,8‐11‐tetraazacyclodecane‐6,13‐diamine

Cations derived by protonation of the ligand title compound (L¹) have been structurally characterized in their di‐ and tetra‐ protonated forms in the salts [H₂L¹][ClO₄]₂·2H₂O and [H₄L¹][ZnCl₄]₂·4H₂O. In both structures, one half of the formula unit comprises the asymmetric unit of the structure, the macrocycle being centrosymmetric, with the two macrocycles adopting similar conformations. In both salts, a pair of diagonally opposed macrocyclic secondary amine groups are protonated; in the [H₄L¹]⁴⁺ salt, the additional pair of protons are accommodated on the exocyclic pendant amine groups. The dispositions of the pendent amines differ between the two structures, being ‘equatorial’ with respect to the macrocyclic ring in the [H₂L¹]²⁺ salt, and ‘axial’ in the [H₄L¹]⁴⁺ salt. In other structurally characterized compounds containing [H₄L¹]⁴⁺ the equatorial disposition was found in the ferricyanide adduct, while in the tetraperchlorate salt the axial disposition was identified. The differences in disposition of the exocyclic groups are ascribed to the extensive H‐bonding in the lattices.     

Synthesis,Vibrational Spectrum and Structure of the Tetracyanoborate K[B(CN)4]·CH3CN

The new tetracyanoborate K[B(CN)₄]·CH₃CN was synthesized by dissolution of the solvent‐free K[B(CN)₄] in acetonitrile and subsequent careful crystallization. The crystal structure has been determined by single‐crystal X‐ray diffraction. It crystallizes in the orthorhombic space group P2₁2₁2₁ with Z = 4. Some comparisons with related structures are made, and the vibrational spectrum is discussed.     

Zur Kenntnis von Natrium-hexafluoromanganat(III)

Sodium hexafluoromanganate(III) has been synthesized by heating equimolecular quantities of Na₂MnF₅ and NaF in argon atmosphere. The compound is monoclinic witha=5.56 (1) Å,b=5.84 (1) Å,c=8.10 (2) Å, =90.7 (2) andZ=2. It is a high spin complex with _eff and the deformation of the octahedra is evident from its IR-spectra. Two enantiotropic transitions (at 562 and 653°C) and the melting point at 800°C have been observed.

---

---

8. Mitt.: Mh. Chem.106, 483 (1975).     

Discussion on the method for the measurement of the flexural modulus of coupled materials and reasons of the shifts of theQ −1 maxima caused by coupling

Summary When measuringQ ^–1 and the flexural resonance frequency of bars clamped at one end, constituted by a viscoelastic polymeric material glued to a rigid support of modulusE ₁, it is possible to calculate the componentsE ₂ andE ₂ of the complex elastic modulus of the polymeric material examined. In this work the minimum (critical) value of the ratioa=E ₂ /E ₁=a _c and the values of the ratioQ ₂ ^–1/Q ^–1=F ₁ are evaluated beyond which no exact calculation ofE ₂ and ofQ ₂ ^–1 is possible.Within the confidence limits of the linear viscoelasticity theory, these values depend on the accuracy of measurement of both frequency and resonance curve, as well as on the instrument employed, on the operating temperature and on the ratio between the thicknesses of the two coupled materials.In order to keep outside the critical conditions, the most convenient method involves the use of measurements of coupled test-pieces having different ratiosz between their thicknesses and of supports having different modulusE ₁, depending on the field of temperature of the analysis ofE ₂ and tg ₂ concerning and E.P.R. elastomer and a vulcanized cis-1,4 polyisoprene in very wide ranges of temperature comprising the glass transition. Moreover, it is demonstrated by analysis the shift on the temperature axis of the tg maximum of the composite test-piece with respect to the position of the tg maximum of the polymeric material alone.With 11 figures and 1 table     

Microchemical characterization of paintings — A case study

Summary The fundamental importance of scientific research for the preservation and restoration of works of art is uncontestable. The methods described in this paper, such as light microscopy, microchemical tests, emission spectroscopy, chromatography, scanning electron analysis, electron microprobe analysis and infrared spectroscopy, are of special significance in this filed. Nevertheless a better understanding of the problems that arise out of new special questions of art history can be obtained only by the right interpretation of the data obtained by scientific methods.

---

Mikrochemische Charakterisierung von Gemälden

Zusammenfassung Die grundlegende Bedeutung wissenschaftlicher Forschung für die Erhaltung und Restaurierung von Kunstwerken ist unbestritten. Die hier beschriebenen Methoden (Lichtmikroskopie, mikrochemische Reaktionen, Emissionsspektroskopie, Chromatographie, Rasterelektronen-Analyse und Infrarotspektroskopie) sind hierfür von zunehmender Bedeutung. Sie ermöglichen ein besseres Verständnis neuerer kunsthistorischer Probleme nur durch die richtige Interpretation der Ergebnisse wissenschaftlicher Methoden.