Strukturviskosität von verdünnten Lösungen von Biopolymeren

The importance of the rheological behaviour of solutions of macromolecules is briefly evaluated. The viscosity of the solutions depends on concentration, shear rate and time of shear, this relation being determined by the structure of the dissolved molecules. In dilute solutions shear dependence of viscosity is very frequently caused by the preferential orientation of anisotropic molecules. In such a case the particle dimensions can be calculated from the true limiting viscosity number, an anisotropy factor, the rotational diffusion constant and the effective particle density. These numbers can be derived from the flow curve, which has been extrapolated to zero concentration. It is necessary to measure the flow curve at shear gradients, which are sufficiently low to allow for an extrapolation to vanishing shear rate. By comparing the experimental flow curve with a choice of theoretical ones, the rotational diffusion constant and the anisotropy factor (axial ratio) can be found. From the limiting viscosity number and the axial ratio, the particle density can be calculated.     

Special Mixing Behavior of Chelate-based Ionic Liquid with Methanol

Compared to the general ionic liquids (ILs), a significant deviation of the binary mixtures of 1-decyl-3-methylimidazolium tri(hexafluoroacetylaceto)-copper(II) ([C₁₀mim][Cu(hfacac)₃]) with methanol was found, indicating the way methanol interacts with ILs might be governed by the special structure of the chelating anion. IR results showed that the (C2-H) of 1-decyl-3-methylimidazolium hexafluoroacetylacetonate ([C₁₀mim][hfacac]) blue-shifted more significantly than that of [C₁₀mim][Cu(hfacac)₃], meanwhile the (C=O) red-shifted in [C₁₀mim][Cu(hfacac)₃], which is contrast with that in [C₁₀mim][hfacac]. Two-dimensional correlation analysis of the FTIR spectra indicated that the chelating cavity has little effect on the sequence of the ILs sites that interact with methanol. Combined with small angle X-ray scattering (SAXS) results, the picture of mixing processes in these two systems were proposed. Methanol interacts directly with the anion followed by the cation in [C₁₀mim][hfacac], while methanol preferentially enters the chelating cavity and enhances the packing effect in the [C₁₀mim][Cu(hfacac)₃] system.     

Study on the formation of the ketonic defects in the thermal degradation of ladder-type poly(p-phenylenes) by vibrational spectroscopy

We have investigated the thermal degradation in air by Fourier transform infrared spectroscopy of a ladder-type copolymer containing fluorene units in the backbone (Me-LPF), to reveal the formation of the ketonic defects. As thermal treatment of Me-LPF film at 200 degrees C in air proceeds, a new group of complex absorption bands due to degradation products arises in the range between 1800 and 1600 cm(-1). The observed overlapping bands were separated and assigned by utilizing the second-derivative IR spectral analysis, which can narrow the peak width to one-third of the originals and thereby eases the analysis. The degraded products were assigned as fluorenone (1718 cm(-1)) and benzophenone (Ar-(C=O)-Ar) (1665 cm(-1)), formed by the oxidation of the backbone, and acylphenone (Ar-(C=O)-R) (1685 cm(-1)) from the side chain. The fluorenone was found to be the major component among the degraded products in the main chain, and the time and temperature dependence indicated that the oxidation is a kind of autocatalytic radical-chain process. The oxidation can reach a very high degree (approximately 30% for 6 h oxidation at 240 degrees C estimated by absorption of the alkyl). Our results suggest the possibility of the oxidation of the 9-bialkylfluorene sites. We propose that the degradation of the alkyl in the side chain can help the radicals to propagate in the chain reaction.     

Komplexe von 2,6-Dimethylpyridin-1-oxid mit Lanthanidjodiden

Complexes of 2,6-dimethylpyridine 1-oxide with lanthanide iodides of the formulaeLn(2,6-LTNO)₅I₃ whereLn=La, Tb and Yb,Ln(2,6-LTNO)₄I₃ whereLn=Pr and Nd and Er(2,6-LTNO)_4.5I₃ have been prepared and characterised by chemical analysis, infrared and conductance studies. Infrared and conductance data have been interpreted in terms of dimeric (or polymeric) structures involving bridging amine oxide groups.

---

---

Mit 2 Abbildungen     

Über die Synthese von 5-(o-Trifluormethylphenyl)-1H-thieno[3,4—e]-1,4-diazepin-2(3H)-onen

The synthesis of 5-(o-trifluoromethylphenyl)-1H-thieno-[3,4-e]1,4-diazepin-2(3H)-one (7) and its nitration and chlorination in pos. 8 are described.     

A preliminary study on fabrication of nanoscale fibrous chitosan membranes in situ by biospecific degradation

A new approach for in situ fabrication of nanoscale fibrous chitosan membrane by biospecific degradation under physiological situation was studied. The chitosan binary blend membranes were fabricated by solvent casting of chitosan solution containing highly deacetylated chitosan (HDC) and moderately deacetylated chitosan (MDC) with different ratio. The biodegradation process was performed in PBS (pH 7.4) containing lysozyme at the temperature of 37 °C. Experimental results from weight loss, reducing sugar in surrounding media, FT-IR, X-ray diffraction, gel permeation chromatography (GPC) and SEM throughout the study showed that the biospecific degradation by lysozyme had removed MDC component selectively. When the ratio of MDC in the binary blend membranes amounted to 0.5, nanoscale domains of HDC and MDC were obtained, and thus a nanoscale fibrous structure was fabricated after biospecific degradation of MDC. This nanofibrous structure and the biospecific degradation of chitosan membranes can have potential advantages and interesting implications in tissue engineering and drug delivery.     

An efficient synthesis of novel spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] building block for blue light-emitting materials

We have developed efficient synthetic routes to obtain a novel building block spiro[[8H]indeno[2,1-b]thiophene-8,9′-fluorene] (SITF), a monothiophene-containing spirobifluorene analogue, and constructed blue light-emitting materials, including 2′,7′-bis([1,1′-biphenyl]-4-yl)-spiro[indeno[2,1-b]thiophene-8,9′-fluorene] (BBP-SITF) and 2′,7′-bis(9,9′-spirobifluoren-2-yl)spiro[[8H]indeno[2,1-b]-thiophene-8,9′-fluorene] (BSBF-SITF). BSBF-SITF has shown to be a stable blue light-emitting material with high PL quantum efficiency (89%) and unique regioselective feature at the C2 of thiophene, which indicate that BSBF-SITF will be useful for constructing complicated optoelectronic systems.     

Berechnung von mittleren Schwingungsamplituden einiger tetraedrischer Moleküle und Ionen nach der Methode der charakteristischen Schwingungen

Mean amplitudes of vibration of a series of tetrahedralXY ₄ molecules and ions (hydrides, halides, oxides and oxoanions) have been calculated using the “Method of the Characteristic Vibrations” ofA. Müller. The results indicate that this method leads to very good values for most of the investigated species, and especially in the cases of highM _X/M_Y mass ratio.     

The electronic structure and spectrum of tropone

The electronic structure and spectrum of tropone were studied by paying special attention to an assignment of the 300 m band. The band was shown to have a single ^* character overlapped by an n ^* transition from the following experimental and theoretical studies: (i) From the comparison of the observed transition energies and intensities with theoretical values obtained by the Pariser-Parr-Pople calculation in which the values of W _X ^2p (valence state ionization potential of the oxygen atom) and k (bond alternation parameter) taken as guiding parameters were changed widely and their adequateness was carefully examined, (ii) From the correlation among the electronic absorption spectra of tropone, troponeimine, and heptafulvene. (iii) From the finding that the 300 m band increases its intensity with the increasing polarity of the solvent. (iv) From the position and intensity of a band newly observed in the vacuum ultraviolet region.

---

Zusammenfassung An Tropon wurden Elektronenstruktur und Spektrum untersucht, speziell die 300 m-Bande. Diese entsteht aus einem einzigen - ^*-Übergang, überlagert von einer schwachen n-^*-Bande, und nicht aus 2 - ^*-Banden. Als Stütze dienen: 1. eine PPP-Rechnung, bei der das Valenzzustandsionisationspotential von Sauerstoff und der Bindungsalternierungsparameter sorgfältig variiert wurden, 2. die Korrelation der Spektren von Tropon, Troponimin und Heptafulven, 3. der Lösungsmitteleinfluß auf die Bande, 4. eine neuaufgefundene UV-Bande.

---

Résumé La structure électronique et le spectre de la tropolone ont été étudiés en accordant une attention particulière à l'identification de la bande à 300 m. Cette bande a été caractérisée comme résultant d'une transition ^* recouverte par une transition n ^*, à l'aide des arguments théoriques et expérimentaux suivants: 1. à partir de la comparaison des énergies et des intensités de transition observées, avec les valeurs théoriques obtenues par un calcul Pariser-Parr-Pople où les valeurs de W _X ^2p (potentiel d'ionisation de l'état de valence de l'atome d'oxygène) et de k (paramètre d'alternance des liaisons), considérés comme paramètres régulateurs, ont été largement variées et soigneusement analysées. 2. à partir de la corrélation entre les spectres d'absorption électronique de la tropolone, de la tropolonéimine et de l'heptafulène. 3. à partir du fait que la bande à 300 m voit son intensité croitre avec la polarité du solvent. 4. à partir de la position et de l'intensité d'une bande nouvelle observée dans la région de l'ultra-violet lointain.

     

Capillary isotachophoresis of some isoquinoline alkaloids

The isotachophoretic behavior of quaternary benzo/c/phenanthridine, protoberberine and aporphine alkaloids in different electrolyte systems is described. The concentration of the leading ion and the pH value of the leading electrolyte affect the relative effective mobilities of the alkaloids. The system of pH 4.7, containing the leading ion K⁺ (0.005 M) counter ion acetate, and the terminating ion β-alanine (0.02 M), has been selected for the quantitative determination of the studied alkaloids in model mixtures and plant extracts.