Maße für gerichtete Geraden und nicht-symmetrische Pseudometriken in der Ebene II

We continue our investigations started in a paper with the same title. The -length of a curve defined in this paper can be written as an integral along the curve. Furthermore, we determine necessary and sufficient conditions for the existence of a measure of orientated lines which generates a given non-symmetric pseudo-metric.

---

---

Herrn Prof. Dr. H.-J. Kanold zum 65. Geburtstag gewidmet     

Spezifisches Verfahren zur quantitativen CO2-Bestimmung in natürlichen Wässern

The direct determination of CO₂ is often faulty because of certain contents of the natural water. Due to this reason a specific method was worked out. The water to be analysed and distilled water are placed side by side in a gas-tight vessel with an atmosphere free of CO₂, whereby mixing is avoided but gas-exchange is possible. After adjustment to the gas-equilibration the CO₂ content of the distilled water is determined e.g. by titration, measuring of conductivity or other methods, from where the CO₂ content in the natural water is calculated.     

High Molecular Orientation in Mono- and Trilayer Polydiacetylene Films Imaged by Atomic Force Microscopy

Atomically flat monolayer and trilayer films of polydiacetylenes have been prepared on mica and silicon using a horizontal deposition technique from a pure water subphase. Langmuir films of 10,12-pentacosadiynoic acid (I) and N-(2-ethanol)-10,12-pentacosadiynamide (II) were compressed to 20 mN/m and subsequently polymerized by UV irradiation at the air-water interface. Blue and red forms of the films were prepared by varying exposure times and incident power. Polymerization to the blue-phase films produced slight contractions of 2 and 5% for the films of II and I, respectively. Longer UV exposures yielded red-phase films with dramatic film contraction of 15 and 32% for II and I, respectively. The horizontal deposition technique provided transfer ratios of unity with minimal film stress or structure modification. Atomic force microscopy images revealed nearly complete coverage of the substrate with atomically flat films. Crystalline domains of up to 100 micrometers of highly oriented polydiacetylene molecules were observed. The results reported herein provide insight into the roles of molecular packing and chain orientations in converting the monomeric film to the polymerized blue and red phases. Copyright 2000 Academic Press.     

Beiträge zur Chemie des Sulfamids, 1. Mitt.: Zur Konstitution des Disilber-sulfamids

According to spectroscopic (IR, broadline proton NMR) and chemical (alkylation) investigations of disilver sulphamide the following molecular structure is assumed: $$\begin{gathered} O \hfill \\ || \hfill \\ H_2 N\_\_S\_\_NAg| \hfill \\ OAg \hfill \\ \end{gathered}$$ From the IR and NMR data deduction concerning the nature of the chemical bonds in this compound is possible. The instability of the still unknown mono-and trisilver sulphamide is discussed with regard to the structure of disilver sulphamide.     

The two-phase structure of segmented block copoly(ether ester)

The annealing induced morphological changes in isotropic block copoly(etherester)s are investigated by small angle X-ray scattering methods. The observed results are consistent with a lamellar model which is comprised of a crystalline core of thickness 35 to 45 Å, a diffuse boundary zone of width 9 Å, and an amorphous layer which is varying strongly in thickness. The enhanced crystallinity of the samples annealed at higher temperatures is mainly due the lateral growth of the lamellae; the long period increases by not more than 20%. The scattering power of the samples is explained by means of an equivalent two-phase model in which the crystalline phase has the same structure as theα-form of poly(butylene terephthalate), whereas the amorphous phase is a mixture of the uncrystallized ester segments and the ether segments. The crystallinity determined from the scattering power is very much higher than that determined from thermoanalytical investigations.     

An indirect flame emission spectrometry method for the determination of traces of sulphur. I

Summary An accurate and simple indirect method of flame emission spectrometric determination of small quantities of elemental sulphur is described. The method is based on the reduction of elemental sulphur by means of sodium borohydride and oxidation of the resulting boron-sulphur compounds to sulphate by means of hydrogen peroxide. The determinations can be carried out in the presence of methanol, acetone, dimethylformamide, toluene and benzene. The detection limit of the reported method is 1 ppm of sulphur.

---

Indirekte etnissionsspektroskopische Bestimmungsmethode für Spuren elementaren Schwefels. I.

Zusammenfassung Eine genaue und einfache, indirekte, emissionsspektroskopische Methode zur Bestimmung geringer Mengen elementaren Schwefels wurde ausgearbeitet. Sie besteht in der Reduktion des elementaren Schwefels mit Hilfe von Natriumborhydrid und in der Oxydation der entstehenden Bor-Schwefel-Verbindung zu Sulfat mit Hilfe von Wasserstoffperoxid. Die Analyse wurde in Methanol, Aceton, Dimethylformamid, Toluol und Benzol durchgeführt. Die Erfassungsgrenze beträgt 1 ppm Schwefel.

---

---

Presented at the 8th International Microchemical Symposium, Graz, August 25–30, 1980.     

The effect of the mechanical properties of the molecular network on the wool-water isotherm

Summary The present position of theoretical investigation of the water-content versus relative humidity isotherm is briefly indicated. Previous workers have anticipated an effect on equilibrium water-content arising from the mechanical properties of the keratin network. Such an effect is reported for supercontracted wool fibres and for reduced and S-methylated fibres, for which an increased saturation water-content is observed. In the case of S-methyl wool, saturation water-content shows little or no dependence on the number of disulphide cross-links, however it does depend on the number of S-methyl groups present. The results are considered in terms ofFlory-Huggins solution theory, and it is indicated that this theory can be usefully applied for relative humidities in excess of 85%. In normal wool solution absorption is permitted only in the noncrystalline component, but in supercontracted wool or S-methyl wool takes place in both components. Even when saturation water-content is greatly increased the isotherm is not appreciably changed below 85% R. H., indicating that no additional sites for strong binding of water become available; apparently all such sites are accessible in normal wool at approximately 85% relative humidity.

---

Zusammenfassung Der gegenwärtige Stand theoretischer Untersuchungen für den isothermen Wassergehalt gegen relative Feuchtigkeit ist kurz kritisch dargelegt. Die bisherigen Bearbeiter haben einen Einfluß auf das Gleichgewicht des Wassergehaltes seitens der mechanischen Eigenschaften des Keratinnetzwerkes angenommen. Ein solcher Effekt wird für superkontrahierte Wollfasern und für solche, reduziert und mit Schwefelmethyl behandelt, mitgeteilt, für die eine erhöhte Wassersättigung zu beobachten ist. Im Fall der schwefelmethylierten Wolle zeigt die Sättigung geringe oder keine Abhängigkeit von der Zahl der Disulfidvernetzungen, sie hängt jedoch von der Zahl der Schwefel-Methylgruppen ab. Diese Resultate werden mit derFlory-Huggins-Lösungstheorie betrachtet, und es zeigt sich, daß diese Theorie gut für relative Feuchtigkeiten größer als 85% angewendet werden kann. In normaler Wolle ist Lösungsabsorption nur in den nichtkristallinen Anteilen möglich, aber in superkontrahierter oder schwefelmethylierter Wolle findet sie auch in den Kristalliten statt. Auch wenn der Sättigungswert der Isotherme gegen Ende stark beeinflußt wird, ändert sich der Verlauf der Isotherme unterhalb 85% r. F. nicht. Das zeigt, daß kerne zusätzlichen Plätze für starke Wasserbindungen entstehen. Offensichtlich sind alle diese Plätze in normaler Wolle bei etwa 85% r. F. zugänglich.

     

Beiträge zur Chemie der Alkylverbindungen von Übergangsmetallen. XLIV. Tetrakis(alkoxycarbonylmethyl)titan-Verbindungen

Contributions to the Chemistry of Transition Metal Alkyl Compounds. XLIII. Tetrakis(alkoxycarbonylmethyl)titanium Compounds Organotitanium(IV) compounds of the type (ROCOCH₂)₄Ti (R ? C₂H₅, i-C₃H₇, t-C₄H₉, C₆H₅, C₆H₅CH₂) were obtained by reactions of ROCOCH₂Li derivatives with TiCl₄ at low temperature. The compounds which decompose only above 90°C were characterized by the hydrolysis products, anaerobic reactions with iodine, and the i.r. spectra. The bond conditions are discussed.     

On the determination of polarity parameters of silica by means of solvatochromic probe dyes

Empirical solvent parameters of silica surfaces are determined by means of solvatochromic dyes, e.g., Cu(tmen) (acac)⁺ ClO ₄ ^– /B(C₆H₅) ₄ ^– , Fe(phen)₂(CN)₂, and Michlers Ketone dissolved in 1,2-dichloroethane or cyclohexane. The values obtained by UV/VIS-measurements are compared with both the polarity scales of Kamlet and Taft and with Gutmann's donor and acceptor numbers. Kamlet and Taft's -parameter (the hydrogen-bond donation capacity of a solvent) is determined independently by means of salicylideneaniline. The ^* of silica is determined using 5-N,N-dimethylamino-5-nitro-2,2-bithiophene and the complex of tetracyanoethylene with Michlers Ketone, respectively. Further on the reliabilities of the obtained Kamlet-Taft parameters , , and ^* are checked by comparism with experimental and calculated values of theE _T(30)-parameter of silica by means of multi-parameter regression analysis. The surface properties of silica are influenced mainly by HBD-properties (75%) and dipolarity/polarizability ^* (20%), but hardly by the HBA-properties (<5%). UV/VIS-measurements were carried out in a special equipment with glass fiber optics, A drawing of the apparatus is given.