关于多目标数学规划的最优性条件

本文讨论定义于Ｂａｎａｃｈ空间的多目标数学规划，得到一些ε－最优解和（弱）有效解的必要条件，充分条件和必要充分条件。     

Planetenbewegungen des Flaggenraumes

In [8] the author gave a report on some properties of flag space motions, especially of the composition of screw motions or rotations in flag space. Planet motions more generally are motions which can be composed by two one-parameter-groups. These motions are investigated with respect to their orbits, their multiple ways of construction and the tubular surfaces they can determine. Some of them yield tubular screw surfaces, some others move every sphere the way that it again envellopes a sphere. These motions, which have no Euclidean counterpart, determine non-trivial, kinematically generated LIE-transformations in flag space.     

Synthesis and application as polymer electrolyte of hyperbranched polyether made by cationic ring‐opening polymerization of 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxymethyl}‐3′‐methyl‐oxetane

A novel cyclic ether monomer 3‐{2‐[2‐(2‐hydroxyethoxy)ethoxy]ethoxy‐methyl}‐3′‐methyloxetane (HEMO) was prepared from the reaction of 3‐hydroxymethyl‐3′‐methyloxetane tosylate with triethylene glycol. The corresponding hyperbranched polyether (PHEMO) was synthesized using BF₃·Et₂O as initiator through cationic ring‐opening polymerization. The evidence from ¹H and ¹³C NMR analyses revealed that the hyperbranched structure is constructed by the competition between two chain propagation mechanisms, i.e. active chain end and activated monomer mechanism. The terminal structure of PHEMO with a cyclic fragment was definitely detected by MALDI‐TOF measurement. A DSC test implied that the resulting polyether has excellent segment motion performance potentially beneficial for the ion transport of polymer electrolytes. Moreover, a TGA assay showed that this hyperbranched polymer possesses high thermostability as compared to its liquid counterpart. The ion conductivity was measured to reach 5.6 × 10^?5 S/cm at room temperature and 6.3 × 10^?4 S/cm at 80 °C after doped with LiTFSI at a ratio of Li:O = 0.05, presenting the promise to meet the practical requirement of lithium ion batteries for polymer electrolytes. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 3650–3665, 2006     

Simultaneous electrochemical determination of uric acid and ascorbic acid on a glassy carbon electrode modified with cobalt(II) tetrakisphenylporphyrin.

A cobalt(II) tetrakisphenylporphyrin (Co(II)TPP) film modified glassy carbon electrode (Co(II)TPP-GCE) was prepared by just coating Co(II)TPP solution on the surface of the electrode. It can be used for the simultaneous determination of ascorbic acid and uric acid. The anodic peaks of AA and UA can be separated well. Owing to the strongly hydrophobic property of porphyrin, the modified electrode has good stability and long life. The linear range for UA and AA were 2.0 x 10(-6)-1.0 x 10(-4) M and 9.0 x 10(-6)-2.0 x 10(-3) M with detection limits of 5.0 x 10(-7) and 5.0 x 10(-6) M, respectively. Furthermore, metalloporphyrins of other kinds were also used to construct modified electrodes. Their performances were inferior compared with that of the Co(II)TPP modified electrode.     

A Convenient Method for the Stereoselective Synthesis of 7αHydroxycholesterol

7-Hydroxyderivativesofcholesteroldisplayawidevarietyofbiologicalactivities'-',mostofwhicharerelatedtothephysiologicalcontrolofcholesterolbiosynthesisandantitumoractivity.Inearlyreports',the7-hydroxycholesterolswerepreparedbythesequenceofacetylation,allylicchromicoxidation,andhydridereduction.Generally,theproductisamixtureof7a-and76-epimerswhichisdifficulttobeseparated.V.Kumaretal5improvedthisprocedurebyusingstereospecificreducingreagentsinsteadofthesimplehydride.7a-and7o-epimerscouldbeobtained…     

The Choquet-Deny convolution equation μ=μ*σ for probability measures on Abelian semigroups

In this note, we characterize the regular probability measures satisfying the Choquet-Deny convolution equation =* on Abelian topological semigroups for a given probability measure .     

Gasdynamische Untersuchung des Jouleschen Überströmversuches

Zusammenfassung Es wird die zeitabhängige Strömung beim Ausgleichsvorgang zwischen zwei endlichen Behältern untersucht. Den Überlegungen wird eine eindimensionale, reibungsfreie und quasistationäre Strömung zugrunde gelegt. Während bei überkritischer Strömung eine analytische Lösung möglich ist, wird das Problem bei unterkritischer Strömung numerisch gelöst.Dem Druckausgleich zwischen den beiden Behältern folgt ein isobarer Wärme- und Massenaustausch, bis sich das thermodynamische Gleichgewicht eingestellt hat.

---

Gasdynamical investigation of Joule's overflow experiment

The time-dependent flow of an exchange process between two big insulated tanks is considered. The problem is treated on the basis of a one-dimensional, inviscid and quasi-steady flow. An analytical solution is obtained for supercritical flow, while for subcritical flow the problem is solved numerically.After the pressure-equilibrium between the two-tanks an isobar heat and mass exchange follows, until the thermodynamic equilibrium is reached.

---

Formelzeichen a Schallgechwindigkeit - A engster Querschnitt - c Geschwindigkeit - c _p spezifische Wärme bei konstantem Druck - c _v spezifische Wärme bei konstantem Volumen - e innere Energie - i Enthalpie - m Masse - M Machzahl - p Druck - spezielle Gaskonstante - s Stromlinie, spezifische Entropie - t dimensionsbehaftete Zeit - T Temperatur - V Volumen - Konstante - Abkürzung - Volumenverhältnis - Verhältnis der spezifischen Wärmen - Dichte - dimensionslose Zeit Indizes 0 Zustand zur Zeitt=0 - 1 Zustand im Überdruckbehälter - 2 Zustand im Überströmbehälter - * Zustand im engsten Querschnitt - K kritisch - M Zustand bei Druckausgleich - E Endzustand bei Temperaturausgleich Herrn Prof. Dr. B. Schmidt in Dankbarkeit zum 60. Geburtstag gewidmet     

Eine direkt formulierte lineare Theorie für viskoelastische Platten und Schalen

Übersicht Eine Möglichkeit der Entwicklung einer allgemeinen Theorie für Platten und Schalen besteht in der Modellierung des Flächentragwerks durch ein zweidimensionales deformierbares Kontimmm und der direkten Ableitung der kinematischen Beziehungen, der Bewegungsgleichungen und der konstitutiveu Gleichungen. Eine so erhaltene Theorie ist mathematisch und physikalisch widerspruchsfrei, jedoch ist es für ihre Anwendung notwendig, die sogenannten Ersatzeigenschaften zu ermitteln. Im Beitrag wird eine geometrisch und physikalisch lineare Theorie behandelt. Jeder Punkt des Kontinuums ist ein infinitesimal kleiner Starrkörper mit nur 5 Freiheitsgraden (3 Translationen, 2 Rotationen). Bei Annahme dieser Einschränkungen gelingt es, eine Theorie direkt abzuleiten, wobei alle Ersatzeigenschaften des Flächentragwerks bestimmt werden können. Im Beitrag werden die Möglichkeiten der allgemeinen Theorie am Beispiel isotropen viskoelastischen Materials mit über die Dicke veränderlichen Eigenschaften gezeigt. Die Theorie schließt die Betrachtung mehrschichtiger Flächentragwerke ein.

---

A directly formulated linear theory of viscoelastic plates and shells

Summary One kind to develop a general theory for plates and shells is the modelling of the structure as a two-dimensional deformable continuum and the direct approach to the kinematical relations, equations of motion and constitutive equations. Such a theory is physically and mathematically correct. For the application of such directly formulated theories it is nessecery to identify the so-called effective properties. In the paper the theory is formulated for geometrical and physical linearity. Each point of the continuum is an infinitesimal small rigid body with only 5 degrees of freedom (3 translations, 2 rotations). For such a kinematical assumption it is possible to develop a direct theory and to determinate all effective properties of the structure. The paper demonstrates the possibilities of the general theory for an isotropic viscoelastic plate with material properties varying over the thickness. The theory includes also the analysis of multilayered plates and shells.

     

Plane contact problems for a periodic two-layered elastic composite

Summary This paper deals with the two-dimensional static punch problems in the presence of friction for a periodically layered half-space. Within the framework of the homogenized model of linear elasticity with microlocal parameters [8–11] the exact solutions of the considered problems are obtained. The case of the indentation of the composite body by a rigid rectangular punch has been discussed in detail.

---

Ebene Kontaktprobleme für ein periodisches elastisches Zweischichten-Komposit

Übersicht In dieser Arbeit wird das zweidimensionale statische Stempelproblem mit Reibung für einen periodisch geschichteten Halbraum betrachtet. Im Rahmen eines Homogenisierungsmodells der linearen Elastizitätstheorie mit mikropolaren Parametern werden die exakten Lösungen der betrachteten Probleme gewonnen. Im Detail wird das Eindringen eines rechteckigen starren Stempels behandelt.

     

Optimization of scrapping decisions: Theory and applications

Contrary to the variety of models and procedures for optimizing the ordering decision in inventory control theory, no comparable tools exist for the scrapping decision. Thus, the current paper constitutes a step in this direction. Using a simple deterministic model, the basic economics and structure of the problem are introduced first. Then we determine explicitly scrap-optimal turn-around-times as well as the corresponding scrap- and rest-quantities. Accounting for the stochastic nature of demand, the model is generalized and algorithms for determination of optimal scrapping decision are discussed. Finally we compare the results and discuss practical applications.