Photoisomerization Mechanism of Ruthenium Sulfoxide Complexes: Role of the Metal‐Centered Excited State in the Bond Rupture and Bond Construction Processes

Phototriggered intramolecular isomerization in a series of ruthenium sulfoxide complexes, [Ru(L)(tpy)(DMSO)]ⁿ⁺ (where tpy=2,2’:6’,2’’‐terpyridine; DMSO=dimethyl sulfoxide; L=2,2’‐bipyridine (bpy), n=2; N,N,N’,N’‐tetramethylethylenediamine (tmen) n=2; picolinate (pic), n=1; acetylacetonate (acac), n=1; oxalate (ox), n=0; malonate (mal), n=0), was investigated theoretically. It is observed that the metal‐centered ligand field (³MC) state plays an important role in the excited state S→O isomerization of the coordinated DMSO ligand. If the population of ³MC_S state is thermally accessible and no ³MC_O can be populated from this state, photoisomerization will be turned off because the ³MC_S excited state is expected to lead to fast radiationless decay back to the original ¹GS_S ground state or photodecomposition along the Ru²⁺?S stretching coordinate. On the contrary, if the population of ³MC_S (or ³MC_O) state is inaccessible, photoinduced S→O isomerization can proceed adiabatically on the potential energy surface of the metal‐to‐ligand charge transfer excited states (³MLCT_S→³MLCT_O). It is hoped that these results can provide valuable information for the excited state isomerization in photochromic d⁶ transition‐metal complexes, which is both experimentally and intellectually challenging as a field of study.     

Low‐Symmetry Ω‐Shaped Zinc Phthalocyanine Sensitizers with Panchromatic Light‐Harvesting Properties for Dye‐Sensitized Solar Cells

Two low‐symmetry phthalocyanines (Pcs) substituted with thiophene units at the non‐peripheral (α) and peripheral (β) positions were synthesized and their optical, electronic‐structure, and electrochemical properties were investigated. The substitution of thiophene units at the α positions of the phthalocyanine skeleton resulted in a red shift of the Q band and significantly modified the molecular‐orbital electronic distributions just below the HOMO and just above the LUMO, with distortion of the typical Gouterman four‐orbital arrangement of MOs. Two amphiphilic Ω‐shaped ZnPcs ( αPcS1 and αPcS2 ) bearing a π‐conjugated side chain with an adsorption site at an α position of the Pc macrocycle were synthesized as sensitizers for dye‐sensitized solar cells (DSSCs). The absorption spectra of αPcS1 and αPcS2 showed red shifted Q bands and a broad band from 350 to 550 nm assignable to the intramolecular charge‐transfer transition from the ZnPc core to the side chains. Time‐dependent DFT calculations provided a clear interpretation of the effect of the thiophene conjugation on the typical phthalocyanine core π MOs. Compound αPcS1 was used as a light‐harvesting dye on a TiO₂ electrode for a DSSC, which showed a panchromatic response in the range 400–800 nm with a power conversion efficiency of 5.5 % under one‐sun conditions.     

Host–Guest Chemistry between Perylene Diimide (PDI) Derivatives and 18‐Crown‐6: Enhancement in Luminescence Quantum Yield and Electrical Conductivity

Perylene diimide (PDI) derivatives exhibit a high propensity for aggregation, which causes the aggregation‐induced quenching of emission from the system. Host–guest chemistry is one of the best‐known methods for preventing aggregation through the encapsulation of guest molecules. Herein we report the use of 18‐crown‐6 (18‐C‐6) as a host system to disaggregate suitably substituted PDI derivatives in methanol. 18‐C‐6 formed complexes with amino‐substituted PDIs in methanol, which led to disaggregation and enhanced emission from the systems. Furthermore, the embedding of the PDI ? 18‐C‐6 complexes in poly(vinyl alcohol) (PVA) films generated remarkably high emission quantum yields (60–70 %) from the PDI derivatives. More importantly, the host–guest systems were tested for their ability to conduct electricity in PVA films. The electrical conductivities of the self‐assembled systems in PVA were measured by electrochemical impedance spectroscopy (EIS) and the highest conductivity observed was 2.42×10^?5 S cm^?1.     

Montecrinanes A–C: Triterpenes with an Unprecedented Rearranged Tetracyclic Skeleton from Celastrus vulcanicola. Insights into Triterpenoid Biosynthesis Based on DFT Calculations

Three new triterpenoids with an unprecedented 6/6/6/6‐fused tetracyclic carbon skeleton, montecrinanes A–C ( 1 – 3 ), were isolated from the root bark of Celastrus vulcanicola, along with known D:B‐friedobaccharanes ( 4 – 6 ), and lupane‐type triterpenes ( 7 – 12 ). The stereostructures of the new metabolites were elucidated based on spectroscopic (1D and 2D NMR) and spectrometric (HR‐EIMS and HR‐ESIMS) techniques. Their absolute configurations were determined by both NMR spectroscopy, with (R)‐(?)‐α‐methoxyphenylacetic acid as a chiral derivatizing agent, and biogenetic considerations. Biogenetic pathways for montecrinane and D:B‐friedobaccharane skeletons were proposed and studied by DFT methods. The theoretical results support the energetic feasibility of the putative biogenetic pathways, in which the 1,2‐methyl shift from the secondary baccharenyl cation represents a novel and key reaction step for a new montecrinane skeleton.     

Highly Chemoselective Synthesis of Indolizidine Lactams by SmI2‐Induced Umpolung of the Amide Bond via Aminoketyl Radicals: Efficient Entry to Alkaloid Scaffolds

Samarium(II) iodide enables a wide range of highly chemoselective umpolung radical transformations proceeding by electron transfer to carbonyl groups; however, cyclizations of important nitrogen‐containing precursors have proven limited due to their prohibitive redox potential. Herein, we report the first reductive cyclizations of unactivated cyclic imides onto N‐tethered olefins using SmI₂/H₂O. This new umpolung protocol leads to the rapid synthesis of nitrogen‐containing heterocycles that are of particular significance as precursors to pharmaceutical pharmacophores and numerous classes of alkaloids. The reaction conditions tolerate a wide range of functional groups. Excellent chemoselectivity is observed in the cyclization over amide and ester functional groups. Such unconventional reactivity has important implications for the design and optimization of new bond‐forming reactions by umpolung radical processes. The reaction advances the SmI₂ cyclization platform to the challenging unactivated N‐tethered acyl‐type radical precursors to access nitrogen‐containing architectures.     

Unraveling σ and π Effects on Magnetic Anisotropy in cis‐NiA4B2 Complexes: Magnetization,HF‐HFEPR Studies,First‐Principles Calculations,and Orbital Modeling

By using complementary experimental techniques and first‐principles theoretical calculations, magnetic anisotropy in a series of five hexacoordinated nickel(II) complexes possessing a symmetry close to C_2v, has been investigated. Four complexes have the general formula [Ni(bpy)X₂]ⁿ⁺ (bpy=2,2′‐bipyridine; X₂=bpy ( 1 ), (NCS^?)₂ ( 2 ), C₂O₄^2? ( 3 ), NO₃^? ( 4 )). In the fifth complex, [Ni(HIM₂‐py)₂(NO₃)]⁺ ( 5 ; HIM₂‐py=2‐(2‐pyridyl)‐4,4,5,5‐tetramethyl‐4,5‐dihydro‐1H‐imidazolyl‐1‐hydroxy), which was reported previously, the two bpy bidentate ligands were replaced by HIM₂‐py. Analysis of the high‐field, high‐frequency electronic paramagnetic resonance (HF‐HFEPR) spectra and magnetization data leads to the determination of the spin Hamiltonian parameters. The D parameter, corresponding to the axial magnetic anisotropy, was negative (Ising type) for the five compounds and ranged from ?1 to ?10 cm^?1. First‐principles SO‐CASPT2 calculations have been performed to estimate these parameters and rationalize the experimental values. From calculations, the easy axis of magnetization is in two different directions for complexes 2 and 3 , on one hand, and 4 and 5 , on the other hand. A new method is proposed to calculate the g tensor for systems with S=1. The spin Hamiltonian parameters (D (axial), E (rhombic), and g_i) are rationalized in terms of ordering of the 3 d orbitals. According to this orbital model, it can be shown that 1) the large magnetic anisotropy of 4 and 5 arises from splitting of the e_g‐like orbitals and is due to the difference in the σ‐donor strength of NO₃^? and bpy or HIM₂‐py, whereas the difference in anisotropy between the two compounds is due to splitting of the t_2g‐like orbitals; and 2) the anisotropy of complexes 1 – 3 arises from the small splitting of the t_2g‐like orbitals. The direction of the anisotropy axis can be rationalized by the proposed orbital model.     

Alkyne Difunctionalization by Dual Gold/Photoredox Catalysis

Highly selective tandem nucleophilic addition/cross‐coupling reactions of alkynes have been developed using visible‐light‐promoted dual gold/photoredox catalysis. The simultaneous oxidation of Au^I and coordination of the coupling partner by photo‐generated aryl radicals, and the use of catalytically inactive gold precatalysts allows for high levels of selectivity for the cross‐coupled products without competing hydrofunctionalization or homocoupling. As demonstrated in representative arylative Meyer–Schuster and hydration reactions, this work expands the scope of dual gold/photoredox catalysis to the largest class of substrates for gold catalysts and benefits from the mild and environmentally attractive nature of visible‐light activation.     

Pseudopeptide‐Based Hydrogels Trapping Methylene Blue and Eosin Y

We present herein the preparation of four different hydrogels based on the pseudopeptide gelator Fmoc‐l ‐Phe‐d ‐Oxd‐OH (Fmoc=fluorenylmethyloxycarbonyl), either by changing the gelator concentration or adding graphene oxide (GO) to the water solution. The hydrogels have been analysed by rheological studies that demonstrated that pure hydrogels are slightly stronger compared to GO‐loaded hydrogels. Then the hydrogels efficiency to trap the cationic methylene blue (MB) and anionic eosin Y (EY) dyes has been analyzed. MB is efficiently trapped by both the pure hydrogel and the GO‐loaded hydrogel through π–π interactions and electrostatic interactions. In contrast, the removal of the anionic EY is achieved in less satisfactory yields, due to the unfavourable electrostatic interactions between the dye, the gelator and GO.     

Metal Oxide Assisted Preparation of Core–Shell Beads with Dense Metal–Organic Framework Coatings for the Enhanced Extraction of Organic Pollutants

Dense and homogeneous metal–organic framework (MOF) coatings on functional bead surfaces are easily prepared by using intermediate sacrificial metal oxide coatings containing the metal precursor of the MOF. Polystyrene (PS) beads are coated with a ZnO layer to give ZnO@PS core–shell beads. The ZnO@PS beads are reactive in the presence of 2‐methylimidazole to transform part of the ZnO coating into a porous zeolitic imidazolate framework‐8 (ZIF‐8) external shell positioned above the internal ZnO precursor shell. The obtained ZIF‐8@ZnO@PS beads can be easily packed in column format for flow‐through applications, such as the solid‐phase extraction of trace priority‐listed environmental pollutants. The prepared material shows an excellent permeance to flow when packed as a column to give high enrichment factors, facile regeneration, and excellent reusability for the extraction of the pollutant bisphenol A. It also shows an outstanding performance for the simultaneous enrichment of mixtures of endocrine disrupting chemicals (bisphenol A, 4‐tert‐octylphenol and 4‐n‐nonylphenol), facilitating their analysis when present at very low levels (<1 μg L^?1) in drinking waters. For the extraction of the pollutant bisphenol A, the prepared ZIF‐8@ZnO@PS beads also show a superior extraction and preconcentration capacity to that of the PS beads used as precursors and the composite materials obtained by the direct growth of ZIF‐8 on the surface of the PS beads in the absence of metal oxide intermediate coatings.